NSLU2-Linux
view · edit · print · history

WRP400.VendorRecoveryBootLog History

Hide minor edits - Show changes to markup

February 25, 2009, at 10:11 AM by rwhitby --
Changed lines 58-770 from:

The U-Boot console is not operative when the console state is locked, and it ignores any keypress to stop autoboot in that state. After the "Uncompressing Linux" line, all console output stops.

to:

The U-Boot console is not operative when the console state is locked, and it ignores any keypress to stop autoboot in that state. After the "Uncompressing Linux" line, all console output stops.

The following is the vendor bootlog for the 1.00.04c firmware when pressing the rest button on power on after we UnlockTheConsole:

<verbatim> Booting... 

  _____        _               _______         _   _
 / ____|      | |             |__   __| /\    | \ | |

| | _ _ | |__ ___ _ __ | | / \ | \| | | | | | | || '_ \ / _ \| '__|| | / /\ \ | . | | |____| |_| || |_) || __/| | | | / ____ \ | |\ | 

 \_____|\__, ||_.__/  \___||_|   |_|/_/    \_\|_| \_|
         __/ |
        |___/

__ __ _____ _____ _______ \ \ / / |_ _|| __ \ |__ __| 

 \ \  / /___   | |  | |__) |    | |  ___   __ _  _ __ __ _
  \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _     \  /| (_) |_| |_ | |         | ||  __/| (_| || | | | | |
    \/  \___/|_____||_|         |_| \___| \__,_||_| |_| |_|

MARVELL MV88W8518? AP32V?. Based on Feroceon Core with ARM926? LE CPU(360 MHZ)

U-Boot 1.1.1 (Sep 27 2007 - 14:42:26) Marvell version: 1.1.1.5 MTL

U-Boot code: 00F00000 -> 00F1F734 BSS: -> 00F2D6F4 RAM Configuration: Bank #0: 00000000 32 MB Flash: 8 MB Env Version[0.1] In: serial Out: serial Err: serial nvram header magic[464c5348] Net: Please wait, this takes a while ... eth0 [PRIME] --- << CONSOLE_STATE IS unlocked >> --- 

 Hit any key to stop autoboot:  1
 0

Checking Boot image at ff9c0000 ...

  1. Booting image at ff9c0000 ... Image Name: cybertan_rom_bin Image Type: ARM Linux Multi-File Image (uncompressed) Data Size: 3918104 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 Contents: Image 0: 1005836 Bytes = 982.3 kB Image 1: 2912256 Bytes = 2.8 MB

OK

Starting kernel ...

Uncompressing Linux............................................................. ........ done, booting the kernel. 

                                  Linux version 2.6.16.16-88w8xx8 (kevin@svn.sip

ura.com) (gcc version 3.4.6) #1 PREEMPT Wed Jan 9 20:05:25 PST 2008 CPU: ARM926EJ?-Sid(wb) [41069260] revision 0 (ARMv5TEJ?) Machine: MV88W8518? Using U-Boot passing parameters structure - U-Boot release 1.1.1.5 Memory policy: ECC disabled, Data cache writeback CPU0?: D VIVT write-back cache CPU0?: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0?: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/mtdblock0 ro noinitrd ip=192 .168.15.1:192.168.15.111:::MV88W8518?:eth0:none console_state=unlocked cy_flash_s ize=0x800000 cy_flash_block_size=0x10000 full_image_addr=ff9c0000 half_image_add r=ff800000 boot_image=1 PID hash table entries: 256 (order: 8, 4096 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 32MB = 32MB total Memory: 30220KB available (1760K code, 320K data, 76K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 MV88W8XX8? LSP release 11 for kernel 2.6.16.16 Marvell USB EHCI Host controller Marvell USB Gadget device controller TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) squashfs: version 3.1 (2006/08/19) Phillip Lougher we use LZMA workspace is 15980, and original zlib ws is 46912 Initializing Cryptographic API io scheduler noop registered io scheduler deadline registered (default) HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled serial8250: ttyS0 at MMIO 0xf800c840 (irq = 11) is a 16550 PPP generic driver version 2.4.2 NET: Registered protocol family 24 PHY found at addr 16, ID 1410c89, mii_status 78c9 eth0: mv88w8xx8 FEC @ 80008000, 00:09:11:22:33:45 irq 9 eth1: mv88w8xx8 FEC @ 80008000, 00:09:11:22:33:46 irq 9 full_image_addr [ff9c0000] half_image_addr [ff800000] boot_image [1] k_size= 000f590c f_size= 002c7000 pad k_size= 000f590c p_size=c2a4004c,p_base_addr=c2a40000 fs_offset= 000f5958 mv88w8xx8 flash: Found 1 x16 devices at 0x0 in 16-bit bank 

 Amd/Fujitsu Extended Query Table at 0x0040

mv88w8xx8 flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 8 MTD partitions on "mv88w8xx8 flash": 0x002b5958-0x006e0000 : "LINUX_ROOTFS" mtd: partition "LINUX_ROOTFS" doesn't start on an erase block boundary -- force read-only 0x00000000-0x001c0000 : "HALFIMAGE" 0x001c0000-0x006e0000 : "ROMIMAGE" 0x006e0000-0x00720000 : "FPAR" 0x00720000-0x00760000 : "LANG" 0x00760000-0x00780000 : "MFG_DATA" 0x00780000-0x007a0000 : "NVRAM" 0x007a0000-0x00800000 : "UBOOT" Linux telephony interface: v1.00 tdu_init() si3215 enable Daisy Chain slicConfigure() reading 83 from slic 0 devId 1 Read Si3215 Revision H on slic 0 Direct read/write test passed on slic 0 Indirect read/write test passed on slic 0 Entering SLIC DC Power Calibration check ......Passed Entering SLIC Calibration check................Passed slicConfigure: Setting CODEC on slic 0 to linear 16-bit mode SLIC 0 PCM settings: txCountLow 1, txCountHi 0 SLIC 0 PCM settings: rxCountLow 1, rxCountHi 0

  1. REGISTER DUMP FOR SLIC 0 ######### 
 Direct Register 0:   0x83
 Direct Register 1:   0xbc
 Direct Register 2:   0x01
 Direct Register 3:   0x00
 Direct Register 4:   0x01
 Direct Register 5:   0x00
 Direct Register 6:   0x00
 Direct Register 7:   0x00
 Direct Register 8:   0x00
 Direct Register 9:   0x00
 Direct Register 10:   0x08
 Direct Register 11:   0x33
 Direct Register 14:   0x00
 Direct Register 15:   0x00
 Direct Register 18:   0x00
 Direct Register 19:   0x00
 Direct Register 20:   0x00
 Direct Register 21:   0x00
 Direct Register 22:   0x00
 Direct Register 23:   0x00
 Direct Register 28:   0x00
 Direct Register 29:   0x0c
 Direct Register 30:   0x40
 Direct Register 31:   0x00
 Direct Register 32:   0x00
 Direct Register 33:   0x00
 Direct Register 34:   0x00
 Direct Register 35:   0x00
 Direct Register 36:   0x00
 Direct Register 37:   0x00
 Direct Register 38:   0x00
 Direct Register 39:   0x00
 Direct Register 40:   0x00
 Direct Register 41:   0x00
 Direct Register 42:   0x00
 Direct Register 43:   0x00
 Direct Register 44:   0x00
 Direct Register 45:   0x00
 Direct Register 46:   0x00
 Direct Register 47:   0x00
 Direct Register 48:   0x00
 Direct Register 49:   0x00
 Direct Register 50:   0x00
 Direct Register 51:   0x00
 Direct Register 52:   0x00
 Direct Register 63:   0x54
 Direct Register 64:   0x00
 Direct Register 65:   0x61
 Direct Register 66:   0x03
 Direct Register 67:   0x1f
 Direct Register 68:   0x04
 Direct Register 69:   0x10
 Direct Register 70:   0x10
 Direct Register 71:   0x00
 Direct Register 72:   0x20
 Direct Register 73:   0x04
 Direct Register 74:   0x32
 Direct Register 75:   0x10
 Direct Register 76:   0x00
 Direct Register 77:   0x00
 Direct Register 78:   0x00
 Direct Register 79:   0x00
 Direct Register 80:   0x00
 Direct Register 81:   0x00
 Direct Register 82:   0xc8
 Direct Register 83:   0xc8
 Direct Register 84:   0x01
 Direct Register 85:   0x00
 Direct Register 86:   0x00
 Direct Register 87:   0x00
 Direct Register 88:   0x02
 Direct Register 89:   0x04
 Direct Register 92:   0xc8
 Direct Register 93:   0x19
 Direct Register 94:   0x29
 Direct Register 95:   0x03
 Direct Register 96:   0x00
 Direct Register 97:   0x00
 Direct Register 98:   0x10
 Direct Register 99:   0x11
 Direct Register 100:   0x11
 Direct Register 101:   0x11
 Direct Register 102:   0x08
 Direct Register 103:   0x04
 Direct Register 104:   0x00
 Direct Register 105:   0x00
 Direct Register 106:   0x20
 Direct Register 107:   0x00
 Direct Register 108:   0x00
 Indirect Register 0:   0x5a82
 Indirect Register 1:   0x0d42
 Indirect Register 2:   0x0000
 Indirect Register 3:   0x4a80
 Indirect Register 4:   0x0830
 Indirect Register 5:   0x0000
 Indirect Register 6:   0x0000
 Indirect Register 7:   0x7efd
 Indirect Register 8:   0x0180
 Indirect Register 9:   0x0000
 Indirect Register 10:   0xe3bf
 Indirect Register 11:   0xf7e7
 Indirect Register 12:   0x2b3a
 Indirect Register 13:   0x4800
 Indirect Register 14:   0x6000
 Indirect Register 15:   0x1000
 Indirect Register 16:   0x3600
 Indirect Register 17:   0x1000
 Indirect Register 18:   0x0200
 Indirect Register 19:   0x1000
 Indirect Register 20:   0x376f
 Indirect Register 21:   0x1000
 Indirect Register 22:   0x8000
 Indirect Register 23:   0x0320
 Indirect Register 24:   0x008c
 Indirect Register 25:   0x0010
 Indirect Register 26:   0x008c
 Indirect Register 27:   0x0000
 Indirect Register 64:   0x0c00
 Indirect Register 66:   0x1000
 Indirect Register 69:   0x6fe8
 Indirect Register 70:   0x83fe
 Indirect Register 71:   0x5fed
 Indirect Register 72:   0x5bbe
 Indirect Register 73:   0x6f3e
 Indirect Register 74:   0xf76f
  1. REGISTER DUMP END#########
  1. Si3215Mode? control; mode=1

slicConfigure() reading 83 from slic 1 devId 2 Read Si3215 Revision H on slic 1 Direct read/write test passed on slic 1 Indirect read/write test passed on slic 1 Entering SLIC DC Power Calibration check ......Passed Entering SLIC Calibration check................Passed slicConfigure: Setting CODEC on slic 1 to linear 16-bit mode SLIC 1 PCM settings: txCountLow 33, txCountHi 0 SLIC 1 PCM settings: rxCountLow 33, rxCountHi 0

  1. REGISTER DUMP FOR SLIC 1 ######### 
 Direct Register 0:   0x83
 Direct Register 1:   0xbc
 Direct Register 2:   0x21
 Direct Register 3:   0x00
 Direct Register 4:   0x21
 Direct Register 5:   0x00
 Direct Register 6:   0x00
 Direct Register 7:   0x00
 Direct Register 8:   0x00
 Direct Register 9:   0x00
 Direct Register 10:   0x08
 Direct Register 11:   0x33
 Direct Register 14:   0x00
 Direct Register 15:   0x00
 Direct Register 18:   0x00
 Direct Register 19:   0x00
 Direct Register 20:   0x00
 Direct Register 21:   0x00
 Direct Register 22:   0x00
 Direct Register 23:   0x00
 Direct Register 28:   0x00
 Direct Register 29:   0x0c
 Direct Register 30:   0x40
 Direct Register 31:   0x00
 Direct Register 32:   0x00
 Direct Register 33:   0x00
 Direct Register 34:   0x00
 Direct Register 35:   0x00
 Direct Register 36:   0x00
 Direct Register 37:   0x00
 Direct Register 38:   0x00
 Direct Register 39:   0x00
 Direct Register 40:   0x00
 Direct Register 41:   0x00
 Direct Register 42:   0x00
 Direct Register 43:   0x00
 Direct Register 44:   0x00
 Direct Register 45:   0x00
 Direct Register 46:   0x00
 Direct Register 47:   0x00
 Direct Register 48:   0x00
 Direct Register 49:   0x00
 Direct Register 50:   0x00
 Direct Register 51:   0x00
 Direct Register 52:   0x00
 Direct Register 63:   0x54
 Direct Register 64:   0x00
 Direct Register 65:   0x61
 Direct Register 66:   0x03
 Direct Register 67:   0x1f
 Direct Register 68:   0x04
 Direct Register 69:   0x10
 Direct Register 70:   0x10
 Direct Register 71:   0x00
 Direct Register 72:   0x20
 Direct Register 73:   0x04
 Direct Register 74:   0x32
 Direct Register 75:   0x10
 Direct Register 76:   0x00
 Direct Register 77:   0x00
 Direct Register 78:   0x00
 Direct Register 79:   0x40
 Direct Register 80:   0x00
 Direct Register 81:   0x00
 Direct Register 82:   0xc7
 Direct Register 83:   0xc7
 Direct Register 84:   0x02
 Direct Register 85:   0x02
 Direct Register 86:   0x00
 Direct Register 87:   0x00
 Direct Register 88:   0x02
 Direct Register 89:   0x04
 Direct Register 92:   0xc8
 Direct Register 93:   0x19
 Direct Register 94:   0x20
 Direct Register 95:   0x01
 Direct Register 96:   0x00
 Direct Register 97:   0x00
 Direct Register 98:   0x11
 Direct Register 99:   0x10
 Direct Register 100:   0x11
 Direct Register 101:   0x11
 Direct Register 102:   0x08
 Direct Register 103:   0x01
 Direct Register 104:   0x00
 Direct Register 105:   0x00
 Direct Register 106:   0x20
 Direct Register 107:   0x00
 Direct Register 108:   0x00
 Indirect Register 0:   0x5a82
 Indirect Register 1:   0x0d42
 Indirect Register 2:   0x0000
 Indirect Register 3:   0x4a80
 Indirect Register 4:   0x0830
 Indirect Register 5:   0x0000
 Indirect Register 6:   0x0000
 Indirect Register 7:   0x7efd
 Indirect Register 8:   0x0180
 Indirect Register 9:   0x0000
 Indirect Register 10:   0xdfdb
 Indirect Register 11:   0x1031
 Indirect Register 12:   0x0b57
 Indirect Register 13:   0x4800
 Indirect Register 14:   0x6000
 Indirect Register 15:   0x1000
 Indirect Register 16:   0x3600
 Indirect Register 17:   0x1000
 Indirect Register 18:   0x0200
 Indirect Register 19:   0x1000
 Indirect Register 20:   0x376f
 Indirect Register 21:   0x1000
 Indirect Register 22:   0x8000
 Indirect Register 23:   0x0320
 Indirect Register 24:   0x008c
 Indirect Register 25:   0x0010
 Indirect Register 26:   0x008c
 Indirect Register 27:   0x0000
 Indirect Register 64:   0x0c00
 Indirect Register 66:   0x1000
 Indirect Register 69:   0x3bea
 Indirect Register 70:   0xb9a1
 Indirect Register 71:   0x8ff9
 Indirect Register 72:   0x84df
 Indirect Register 73:   0x29f2
 Indirect Register 74:   0xf4ee
  1. REGISTER DUMP END#########
  1. Si3215Mode? control; mode=1

phone_mrvl: initialized GACT probability on Mirror/redirect action on u32 classifier 

    Perfomance counters on
    input device check on
    Actions configured

Netfilter messages via NETLINK v0.30. NET: Registered protocol family 2 IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered GRE over IPv4? tunneling driver ip_conntrack version 2.4 (256 buckets, 2048 max) - 220 bytes per conntrack ctnetlink v0.90: registering with nfnetlink. ip_conntrack_pptp version 3.1 loaded ip_nat_pptp version 3.0 loaded ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> p=squashfs VFS: Mounted root (squashfs filesystem) readonly. Freeing init memory: 76K sysinit.... Using /lib/modules/cy_netfilter.ko Using /lib/modules/cy_fifolog.ko signal init .... init nvram.... Name to be unset = wl0_hwaddr=00:21:29:09:6B:8F Name to be unset = wan_get_dns=192.168.1.1 Name to be unset = action_service=wireless Name to be unset = wan_get_domain=lan Name to be unset = wan_get_hostname=wrp400 restore_defaults nvram.... New length = 8230 The boot is UNKNOWN The boot is UNKNOWN Load CA Data killall: httpd: no process killed Using /lib/modules/led_driver.ko Using /lib/modules/env_driver.ko cy_env : Init cy_env : Get UBOOT MTD cy_env : Init Env cy_env : Env Version[0.1] cy_env : Init ENV Device Ok

log_change....log_enable==0

  • log_change done ***

++ RPPLINK: waiting on voice . . . RPPLINK_CLIENT_INIT_OK New length = 8259 name=[eth0] lan_ifname=[br0] =====> set br0 hwaddr to eth0 expect on/off for argument name=[wlan0] lan_ifname=[br0] Using /lib/modules/ap-linux.ko Set MVAP done... Configuration file: /tmp/wireless_security_file read mtd5 <6>Allocate memory for User Buffer( 0xc1900000 982016[0x0efc00]) <6>SRAM Allocation for WLAN module 0xfc015000 size 41984 <6>MODULE: defer_triggers created: 0xc02c2000 size: 280) <6>MODULE: StnQingInfo? created: 0xc1d26000 size: 4760) <6>MODULE: AssocTable? created: 0xc1eb0000 size: 10428) <7>mvWLAN: Registered netdevice wlan0 Already using this reigster handle: 0 Alloc and Init the WLAN device <7>wlan0: Registered netdevice wlan0ap for AP use <7>wlan0: mvWLAN_open <7>wlan0ap: mvWLAN_open Using interface wlan0 with hwaddr 00:21:29:09:6b:8f and ssid 'linksys6B8F' Flushing old station entries Deauthenticate all stations l2_packet_receive - recvfrom: Network is down <7>unsupported ioctl(0x8946) device wlan0 entered promiscuous mode unsupported ioctl(0x8946) wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated SIPURA: OAL module initing SIPURA: OAL Timer module initing SIPURA: OAL Timer module inited:0 SIPURA: OAL module inited tdu_nstd_ioctl PHONE_REC_START/PHONE_PLAY_START 1 tdu_nstd_ioctl PHONE_REC_START/PHONE_PLAY_START 1 tdu_nstd_ioctl PHONE_REC_START/PHONE_PLAY_START 0 tdu_nstd_ioctl PHONE_REC_START/PHONE_PLAY_START 0 ioctl failed: Cannot assign requested address VOICE_PHONE1_OFF VOICE_PHONE2_OFF WIRELESS_ON SYSTEM_WIRELESS_SES_SECURED br0: File exists device wlan0 is already a member of a bridge; can't enslave it to bridge br0. expect on/off for argument br0: port 2(wlan0) entering learning state br0: port 1(eth0) entering learning state br0: topology change detected, propagating br0: port 2(wlan0) entering forwarding state br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state Busybox configured w/o syslogd lo: File exists tftpd: tftp server started tftpd: tftpd: standalone socket br0 192.168.15.100 86400 info, udhcp server (v0.9.8-r3230) started ~~~~~ start upnpd .... zebra disabled. Name to be unset = wl_wsc_config_method=pin killall: wsc: no process killed

J>>>>>> START WSC >>>>>>>>>>> SYSTEM_LAN_UP get lan ipaddr:10fa8c0, netmask:ffffff disable nev multiple times? web enabled:1 AUD_startCollectDigit(0) AUD_startCollectDigit(1) ioctl failed: Cannot assign requested address flash_task RPPLINK_INIT_OK RPPLINK SP Started VOICE_PHONE2_OFF 

 MAC get =00:21:29:09:6B:8F ==================

002129096B8F ================== 

 ~~~~~~~  enrolleeInfo: auth=2000 ,encry=800 ~~~~~~~~~~

=== debug: InitWSCEnrolleeSM? === Jan 1 00:00:13 : 5bUpnpd-v010 start!!! 

 uuid=00212909-6b8e-0021-290a-6b8d00000000  ===================================

 ############  UPnPSetState?_WFAWLANConfig_STAStatus!!! ##############
  1. UPnPSendEvent? ###################
  2. UPnPSetState?_WFAWLANConfig_APStatus ###################
  3. UPnPSendEvent? ################### 
 ############  UPnPSetState?_WFAWLANConfig_WLANEvent!!! ##############
  1. UPnPSendEvent? ###################

hostapd pid is 161 ++ RPPLINK: voice up, starting router server . . . router : RPPLINK SP Started CreateSSDPNotifySocket?(192.168.15.1)

=== debug: InitWSCEnrolleeSM? === hostapd pid is 161 Dumping Meap_config_commit ssage Received:WscIE?.c--line 478, (msgLen 22) dd 0e 00 50 f2 04 10 4a : 00 0ap_config_commit 1 10 10 44 00 01 01 : 00 00 00 00 00 00 Dumping Message Received:WscIE?.c--line 590, (msgLen 128) dd 78 00 50 f2 04 10 4a : 00 01 10 10 44 00 01 01 : 10 3b 00 01 03 10 47 00 : 10 00 21 29 09 6b 8e 00 : 21 29 0a 6b 8d 00 00 00 : 00 10 21 00 0c 4c 69 6e : 6b 73 79 73 20 49 6e 63 : 2e 10 23 00 06 57 52 50 : 34 30 30 10 24 00 07 31 : 2e 30 30 2e 30 34 10 42 : 00 0c 43 52 33 30 31 48 : 36 30 30 33 31 35 10 54 : 00 08 00 06 00 50 f2 04 : 00 01 10 11 00 06 57 52 : 50 34 30 30 10 08 00 02 : 00 88 fc 77 04 00 00 00 :

SYSTEM_WIRELESS_SES_SECURED tallest:=====( wan_or_lan=wan )===== tallest:=====( wan_or_lan=wan is wan !!)===== info, udhcp client (v0.9.8-r3230) started

Hit enter to continue... 

 login: ioctl failed: Cannot assign requested address

info, Sending select for 192.168.1.169... ioctl failed: Cannot assign requested address ioctl failed: Cannot assign requested address ioctl failed: Cannot assign requested address received netlink event: 2 with par (8) wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated info, (1) Lease of 192.168.1.169 obtained, lease time 43200 New length = 8260 New length = 8284 New length = 8303 received netlink event: 1 with par (5) eth1: No such process br0 192.168.15.100 86400 killall: dnsmasq: no process killed default gw:101a8c0 get ip addr:192.168.1.169 dhcp option name: dnssvr value: 192.168.1.1 dhcp option name: domain value: lan get gw addr:192.168.1.1 get netmask:255.255.255.0 System started: ip@192.168.1.169, reboot reason:H0 killall: ping: no process killed

do re_sync_port_maping ... PING 192.168.1.1 (192.168.1.1): 22 data bytes 22 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=7.7 ms 22 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=0.7 ms 22 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.7 ms killall: ping: no process killed PING 192.168.1.1 (192.168.1.1): 1458 data bytes 1458 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=2.0 ms 1458 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=2.1 ms 1458 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=2.1 ms

ping64=7 ping1500=21 count=2

qos_rate= 51200 BandWidth? form Ping DNS mode wan_qos_rate =[40960] SIOCSIFFLAGS: Cannot assign requested address SIOCSIFFLAGS: Cannot assign requested address killall: igmprt: no process killed start_igmp_proxy... received netlink event: 1 with par (4) +++++oldif=eth1, newif=eth1 received netlink event: 2 with par (4) +++++oldif=eth1, newif=eth1 received netlink event: 1 with par (4) +++++oldif=eth1, newif=eth1 received netlink event: 1 with par (8) +++++oldif=eth1, newif=eth1 received netlink event: 2 with par (8) +++++oldif=eth1, newif=eth1 received netlink event: 1 with par (8) +++++oldif=eth1, newif=eth1 We will use igmpv2

use*** K WLAN Multicast Snooping initialized *** 

 upstream interface (eth1)
  • index[1]=lo
  • >> wlan0 index 8 
 index[4]=eth0:0
  • index[5]=eth1
  • index[7]=br0
  • index[8]=wlan0:0

wan_dbnum=1 lan_dbnum=0

updateLANMacAddress(01:00:5e:00:00:01, 1,-1,-1,-1)

updateLANMacAddress(01:00:5e:00:00:01, 1,2,3,4)

updateLANMacAddress(01:00:5e:00:00:02, 1,-1,-1,-1)

updateLANMacAddress(01:00:5e:00:00:02, 1,2,3,4) ddns: stop_ddns() killall: ez-ipupdate: no process killed ddns: start_ddns() init_ddns() ddns_enable:0, ddns_enable_buf: killall: process_monitor: no process killed NTP-Server List: 209.81.9.7 207.46.130.100 192.36.144.23 killall: zebra: no process killed killall: ripd: no process killed zebra disabled. 

 do_ntp run ntpclient -h 209.81.9.7 207.46.130.100 192.36.144.23   -l -s -i 10 -

c 2 return code=0, from ntpclient

+10,+10,+10 2 4 Time update successfully, adjust time. (adjust:10.000000)

Year:2009,Month:2,Day:25,Hour:20,Min:10,Sec:37

TimeZone?:34,i=34,startm=10,endmonth=3,diffm=1,j=2 Adjust daylight

dstBias:3600

,Year:2009,Month:2,Day:25,Hour:21,Min:10,Sec:37

do re_sync_port_maping ... We need to re-update after 3600 seconds 606x_filter = mv606x_rx_rate port_no 0 606x_filter = mv606x_tx_rate port_no 5 RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory

....rwhitby? wan_qos_rate=40960 .... init_rate ef_rate[20352] af1_rate[8140]af2[6105],af3[4070]af4[1221]be_rate[816] HTB: quantum of class 100001 is big. Consider r2q change. HTB: quantum of class 100010 is big. Consider r2q change. do_qos() lan_qos_rate[0] wan_qos_rate[40960].

updateLANMa>>update group 239.255.255.250 cache vif range as 7~8 cAddress(01:00:5e:7f:ff:fa, 1,-1,-1,-1)

updateLANMacAddress(01:00:5e:7f:ff:fa, 1,2,3,4)

</verbatim>

Restore
February 25, 2009, at 09:11 AM by rwhitby --
Added line 58:

The U-Boot console is not operative when the console state is locked, and it ignores any keypress to stop autoboot in that state. After the "Uncompressing Linux" line, all console output stops.

Restore
February 25, 2009, at 08:58 AM by rwhitby --
Changed lines 1-2 from:

The following is the vendor bootlog from firmware 1.00.04c when holding in the reset button on power up:

to:

The following is the vendor bootlog from the 1.00.04c firmware when holding in the reset button on power up:

Restore
February 25, 2009, at 08:57 AM by rwhitby --
Changed lines 1-2 from:

The following is the vendor boot log from firmware 1.00.04c when holding in the reset button on power up:

to:

The following is the vendor bootlog from firmware 1.00.04c when holding in the reset button on power up:

Restore
February 25, 2009, at 08:56 AM by rwhitby --
Changed lines 21-22 from:
 MARVELL MV88W8518? AP32V?.
 Based on Feroceon Core with ARM926? LE CPU(360 MHZ)
to:
 MARVELL MV88W8518 AP32V.
 Based on Feroceon Core with ARM926 LE CPU(360 MHZ)
Restore
February 25, 2009, at 08:56 AM by rwhitby --
Added lines 1-57:

The following is the vendor boot log from firmware 1.00.04c when holding in the reset button on power up: 

 Booting...

   _____        _               _______         _   _
  / ____|      | |             |__   __| /\    | \ | |
 | |     _   _ | |__    ___  _ __ | |   /  \   |  \| |
 | |    | | | || '_ \  / _ \| '__|| |  / /\ \  | .   |
 | |____| |_| || |_) ||  __/| |   | | / ____ \ | |\  |
  \_____|\__, ||_.__/  \___||_|   |_|/_/    \_\|_| \_|
          __/ |
         |___/
 __      __    _____  _____    _______
 \ \    / /   |_   _||  __ \  |__   __|
  \ \  / /___   | |  | |__) |    | |  ___   __ _  _ __ __ _
   \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _  \ 
    \  /| (_) |_| |_ | |         | ||  __/| (_| || | | | | |
     \/  \___/|_____||_|         |_| \___| \__,_||_| |_| |_|


 MARVELL MV88W8518? AP32V?.
 Based on Feroceon Core with ARM926? LE CPU(360 MHZ)


 U-Boot 1.1.1 (Sep 27 2007 - 14:42:26)
 Marvell version: 1.1.1.5 MTL

 U-Boot code: 00F00000 -> 00F1F734  BSS: -> 00F2D6F4
 RAM Configuration:
 Bank #0: 00000000 32 MB
 Flash:  8 MB
 Env Version[0.1]
 In:    serial
 Out:   serial
 Err:   serial
 nvram header magic[464c5348]
 Net:   Please wait, this takes a while ...
 eth0 [PRIME]
 --- << CONSOLE_STATE IS locked >> ---
  Hit any key to stop autoboot......pass

 Checking Boot image at ff9c0000 ...
 ## Booting image at ff9c0000 ...
    Image Name:   cybertan_rom_bin
    Image Type:   ARM Linux Multi-File Image (uncompressed)
    Data Size:    3918104 Bytes =  3.7 MB
    Load Address: 00008000
    Entry Point:  00008000
    Contents:
    Image 0:  1005836 Bytes = 982.3 kB
    Image 1:  2912256 Bytes =  2.8 MB
 OK

 Starting kernel ...

 Uncompressing Linux..................................................................... done, booting the kernel.
Restore
view · edit · print · history · Last edited by rwhitby.
Originally by rwhitby.
Page last modified on February 25, 2009, at 10:11 AM