NSLU2-Linux
view · edit · print · history

WRP400.VendorBootLog History

Hide minor edits - Show changes to markup

February 25, 2009, at 10:05 AM by rwhitby --
Changed lines 762-768 from:

Note that the console state is now unlocked, and there is a two second countdown during which you can hit a key to stop the autoboot.

to:

Note that the console state is now unlocked, and there is a two second countdown during which you can hit a key to stop the autoboot.

The linux console is now active, and if you hit Enter, a login prompt appears:

  login:

Note that at this point, the password for the root account is not known, and the web interface password does not work. This is solved by the ShadowDataHack.

February 25, 2009, at 10:01 AM by rwhitby --
Changed line 75 from:
   \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _  \
to:
   \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _  \ 
February 25, 2009, at 09:59 AM by rwhitby --
Changed lines 116-117 from:

Note that the console state is now unlocked, and there is a two second countdown during which you can hit a key to stop the autoboot. However, note that the kernel output is still disabled.

to:
 Linux version 2.6.16.16-88w8xx8 (kevin@svn.sipura.com) (gcc version 3.4.6) #1 PREEMPT Wed Jan 9 20:05:25 PST 2008
 CPU: ARM926EJ?-Sid(wb) [41069260] revision 0 (ARMv5TEJ?)
 Machine: MV88W8518?
 Using U-Boot passing parameters structure - U-Boot release 1.1.1.5
 Memory policy: ECC disabled, Data cache writeback
 CPU0?: D VIVT write-back cache
 CPU0?: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
 CPU0?: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
 Built 1 zonelists
 Kernel command line: console=ttyS0,115200 root=/dev/mtdblock0 ro noinitrd ip=192.168.15.1:192.168.15.111:::MV88W8518?:eth0:none console_state=unlocked cy_flash_size=0x800000 cy_flash_block_size=0x10000 full_image_addr=ff9c0000 half_image_addr=ff800000 boot_image=1
 PID hash table entries: 256 (order: 8, 4096 bytes)
 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 Memory: 32MB = 32MB total
 Memory: 30220KB available (1760K code, 320K data, 76K init)
 Mount-cache hash table entries: 512
 CPU: Testing write buffer coherency: ok
 NET: Registered protocol family 16
 MV88W8XX8? LSP release 11 for kernel 2.6.16.16
 Marvell USB EHCI Host controller
 Marvell USB Gadget device controller
 TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
 squashfs: version 3.1 (2006/08/19) Phillip Lougher
 we use LZMA workspace is 15980, and original zlib ws is 46912
 Initializing Cryptographic API
 io scheduler noop registered
 io scheduler deadline registered (default)
 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
 N_HDLC line discipline registered.
 Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
 serial8250: ttyS0 at MMIO 0xf800c840 (irq = 11) is a 16550
 PPP generic driver version 2.4.2
 NET: Registered protocol family 24
 PHY found at addr 16,  ID 1410c89,  mii_status 78c9
 eth0: mv88w8xx8 FEC @ 80008000, 00:09:11:22:33:45 irq 9
 eth1: mv88w8xx8 FEC @ 80008000, 00:09:11:22:33:46 irq 9
 full_image_addr [ff9c0000]
 half_image_addr [ff800000]
 boot_image [1]
 k_size= 000f590c
 f_size= 002c7000
 pad k_size= 000f590c
 p_size=c2a4004c,p_base_addr=c2a40000
 fs_offset= 000f5958
 mv88w8xx8 flash: Found 1 x16 devices at 0x0 in 16-bit bank
  Amd/Fujitsu Extended Query Table at 0x0040
 mv88w8xx8 flash: Swapping erase regions for broken CFI table.
 number of CFI chips: 1
 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
 Creating 8 MTD partitions on "mv88w8xx8 flash":
 0x002b5958-0x006e0000 : "LINUX_ROOTFS"
 mtd: partition "LINUX_ROOTFS" doesn't start on an erase block boundary -- force read-only
 0x00000000-0x001c0000 : "HALFIMAGE"
 0x001c0000-0x006e0000 : "ROMIMAGE"
 0x006e0000-0x00720000 : "FPAR"
 0x00720000-0x00760000 : "LANG"
 0x00760000-0x00780000 : "MFG_DATA"
 0x00780000-0x007a0000 : "NVRAM"
 0x007a0000-0x00800000 : "UBOOT"
 Linux telephony interface: v1.00
 tdu_init()
 si3215 enable Daisy Chain
 slicConfigure() reading 83 from slic 0 devId 1
 Read Si3215 Revision H on slic 0
 Direct read/write test passed on slic 0
 Indirect read/write test passed on slic 0
 Entering SLIC DC Power Calibration check ......Passed
 Entering SLIC Calibration check................Passed
 slicConfigure: Setting CODEC on slic 0 to linear 16-bit mode
 SLIC 0 PCM settings: txCountLow 1, txCountHi 0
 SLIC 0 PCM settings: rxCountLow 1, rxCountHi 0
 #########REGISTER DUMP FOR SLIC 0 #########
  Direct Register 0:   0x83
  Direct Register 1:   0xbc
  Direct Register 2:   0x01
  Direct Register 3:   0x00
  Direct Register 4:   0x01
  Direct Register 5:   0x00
  Direct Register 6:   0x00
  Direct Register 7:   0x00
  Direct Register 8:   0x00
  Direct Register 9:   0x00
  Direct Register 10:   0x08
  Direct Register 11:   0x33
  Direct Register 14:   0x00
  Direct Register 15:   0x00
  Direct Register 18:   0x00
  Direct Register 19:   0x00
  Direct Register 20:   0x00
  Direct Register 21:   0x00
  Direct Register 22:   0x00
  Direct Register 23:   0x00
  Direct Register 28:   0x00
  Direct Register 29:   0x0c
  Direct Register 30:   0x40
  Direct Register 31:   0x00
  Direct Register 32:   0x00
  Direct Register 33:   0x00
  Direct Register 34:   0x00
  Direct Register 35:   0x00
  Direct Register 36:   0x00
  Direct Register 37:   0x00
  Direct Register 38:   0x00
  Direct Register 39:   0x00
  Direct Register 40:   0x00
  Direct Register 41:   0x00
  Direct Register 42:   0x00
  Direct Register 43:   0x00
  Direct Register 44:   0x00
  Direct Register 45:   0x00
  Direct Register 46:   0x00
  Direct Register 47:   0x00
  Direct Register 48:   0x00
  Direct Register 49:   0x00
  Direct Register 50:   0x00
  Direct Register 51:   0x00
  Direct Register 52:   0x00
  Direct Register 63:   0x54
  Direct Register 64:   0x00
  Direct Register 65:   0x61
  Direct Register 66:   0x03
  Direct Register 67:   0x1f
  Direct Register 68:   0x04
  Direct Register 69:   0x10
  Direct Register 70:   0x10
  Direct Register 71:   0x00
  Direct Register 72:   0x20
  Direct Register 73:   0x04
  Direct Register 74:   0x32
  Direct Register 75:   0x10
  Direct Register 76:   0x00
  Direct Register 77:   0x00
  Direct Register 78:   0x00
  Direct Register 79:   0x00
  Direct Register 80:   0x00
  Direct Register 81:   0x00
  Direct Register 82:   0xc8
  Direct Register 83:   0xc7
  Direct Register 84:   0x01
  Direct Register 85:   0x00
  Direct Register 86:   0x00
  Direct Register 87:   0x00
  Direct Register 88:   0x01
  Direct Register 89:   0x04
  Direct Register 92:   0xc8
  Direct Register 93:   0x19
  Direct Register 94:   0x24
  Direct Register 95:   0x01
  Direct Register 96:   0x00
  Direct Register 97:   0x00
  Direct Register 98:   0x10
  Direct Register 99:   0x11
  Direct Register 100:   0x11
  Direct Register 101:   0x11
  Direct Register 102:   0x08
  Direct Register 103:   0x04
  Direct Register 104:   0x00
  Direct Register 105:   0x00
  Direct Register 106:   0x20
  Direct Register 107:   0x00
  Direct Register 108:   0x00
  Indirect Register 0:   0x5a82
  Indirect Register 1:   0x0d42
  Indirect Register 2:   0x0000
  Indirect Register 3:   0x4a80
  Indirect Register 4:   0x0830
  Indirect Register 5:   0x0000
  Indirect Register 6:   0x0000
  Indirect Register 7:   0x7efd
  Indirect Register 8:   0x0180
  Indirect Register 9:   0x0000
  Indirect Register 10:   0xe0fe
  Indirect Register 11:   0xd7ef
  Indirect Register 12:   0x3f7a
  Indirect Register 13:   0x4800
  Indirect Register 14:   0x6000
  Indirect Register 15:   0x1000
  Indirect Register 16:   0x3600
  Indirect Register 17:   0x1000
  Indirect Register 18:   0x0200
  Indirect Register 19:   0x1000
  Indirect Register 20:   0x376f
  Indirect Register 21:   0x1000
  Indirect Register 22:   0x8000
  Indirect Register 23:   0x0320
  Indirect Register 24:   0x008c
  Indirect Register 25:   0x0010
  Indirect Register 26:   0x008c
  Indirect Register 27:   0x0000
  Indirect Register 64:   0x0c00
  Indirect Register 66:   0x1000
  Indirect Register 69:   0x65ec
  Indirect Register 70:   0x83fe
  Indirect Register 71:   0x5feb
  Indirect Register 72:   0xdb72
  Indirect Register 73:   0x6f3e
  Indirect Register 74:   0xff6b
 #########REGISTER DUMP END#########

 #### Si3215Mode? control; mode=1
 slicConfigure() reading 83 from slic 1 devId 2
 Read Si3215 Revision H on slic 1
 Direct read/write test passed on slic 1
 Indirect read/write test passed on slic 1
 Entering SLIC DC Power Calibration check ......Passed
 Entering SLIC Calibration check................Passed
 slicConfigure: Setting CODEC on slic 1 to linear 16-bit mode
 SLIC 1 PCM settings: txCountLow 33, txCountHi 0
 SLIC 1 PCM settings: rxCountLow 33, rxCountHi 0
 #########REGISTER DUMP FOR SLIC 1 #########
  Direct Register 0:   0x83
  Direct Register 1:   0xbc
  Direct Register 2:   0x21
  Direct Register 3:   0x00
  Direct Register 4:   0x21
  Direct Register 5:   0x00
  Direct Register 6:   0x00
  Direct Register 7:   0x00
  Direct Register 8:   0x00
  Direct Register 9:   0x00
  Direct Register 10:   0x08
  Direct Register 11:   0x33
  Direct Register 14:   0x00
  Direct Register 15:   0x00
  Direct Register 18:   0x00
  Direct Register 19:   0x00
  Direct Register 20:   0x00
  Direct Register 21:   0x00
  Direct Register 22:   0x00
  Direct Register 23:   0x00
  Direct Register 28:   0x00
  Direct Register 29:   0x0c
  Direct Register 30:   0x40
  Direct Register 31:   0x00
  Direct Register 32:   0x00
  Direct Register 33:   0x00
  Direct Register 34:   0x00
  Direct Register 35:   0x00
  Direct Register 36:   0x00
  Direct Register 37:   0x00
  Direct Register 38:   0x00
  Direct Register 39:   0x00
  Direct Register 40:   0x00
  Direct Register 41:   0x00
  Direct Register 42:   0x00
  Direct Register 43:   0x00
  Direct Register 44:   0x00
  Direct Register 45:   0x00
  Direct Register 46:   0x00
  Direct Register 47:   0x00
  Direct Register 48:   0x00
  Direct Register 49:   0x00
  Direct Register 50:   0x00
  Direct Register 51:   0x00
  Direct Register 52:   0x00
  Direct Register 63:   0x54
  Direct Register 64:   0x00
  Direct Register 65:   0x61
  Direct Register 66:   0x03
  Direct Register 67:   0x1f
  Direct Register 68:   0x04
  Direct Register 69:   0x10
  Direct Register 70:   0x10
  Direct Register 71:   0x00
  Direct Register 72:   0x20
  Direct Register 73:   0x04
  Direct Register 74:   0x32
  Direct Register 75:   0x10
  Direct Register 76:   0x00
  Direct Register 77:   0x00
  Direct Register 78:   0x00
  Direct Register 79:   0x40
  Direct Register 80:   0x00
  Direct Register 81:   0x00
  Direct Register 82:   0xc7
  Direct Register 83:   0xc7
  Direct Register 84:   0x02
  Direct Register 85:   0x02
  Direct Register 86:   0x00
  Direct Register 87:   0x00
  Direct Register 88:   0x02
  Direct Register 89:   0x04
  Direct Register 92:   0xc8
  Direct Register 93:   0x19
  Direct Register 94:   0x28
  Direct Register 95:   0x01
  Direct Register 96:   0x00
  Direct Register 97:   0x00
  Direct Register 98:   0x11
  Direct Register 99:   0x10
  Direct Register 100:   0x11
  Direct Register 101:   0x11
  Direct Register 102:   0x08
  Direct Register 103:   0x01
  Direct Register 104:   0x00
  Direct Register 105:   0x00
  Direct Register 106:   0x20
  Direct Register 107:   0x00
  Direct Register 108:   0x00
  Indirect Register 0:   0x5a82
  Indirect Register 1:   0x0d42
  Indirect Register 2:   0x0000
  Indirect Register 3:   0x4a80
  Indirect Register 4:   0x0830
  Indirect Register 5:   0x0000
  Indirect Register 6:   0x0000
  Indirect Register 7:   0x7efd
  Indirect Register 8:   0x0180
  Indirect Register 9:   0x0000
  Indirect Register 10:   0xdd8b
  Indirect Register 11:   0x9024
  Indirect Register 12:   0x8b52
  Indirect Register 13:   0x4800
  Indirect Register 14:   0x6000
  Indirect Register 15:   0x1000
  Indirect Register 16:   0x3600
  Indirect Register 17:   0x1000
  Indirect Register 18:   0x0200
  Indirect Register 19:   0x1000
  Indirect Register 20:   0x376f
  Indirect Register 21:   0x1000
  Indirect Register 22:   0x8000
  Indirect Register 23:   0x0320
  Indirect Register 24:   0x008c
  Indirect Register 25:   0x0010
  Indirect Register 26:   0x008c
  Indirect Register 27:   0x0000
  Indirect Register 64:   0x0c00
  Indirect Register 66:   0x1000
  Indirect Register 69:   0xbfea
  Indirect Register 70:   0xffe2
  Indirect Register 71:   0xfff3
  Indirect Register 72:   0xaccb
  Indirect Register 73:   0xffe2
  Indirect Register 74:   0xffe2
 #########REGISTER DUMP END#########

 #### Si3215Mode? control; mode=1
 phone_mrvl: initialized
 GACT probability on
 Mirror/redirect action on
 u32 classifier
     Perfomance counters on
     input device check on
     Actions configured
 Netfilter messages via NETLINK v0.30.
 NET: Registered protocol family 2
 IP route cache hash table entries: 512 (order: -1, 2048 bytes)
 TCP established hash table entries: 2048 (order: 1, 8192 bytes)
 TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
 TCP: Hash tables configured (established 2048 bind 2048)
 TCP reno registered
 GRE over IPv4? tunneling driver
 ip_conntrack version 2.4 (256 buckets, 2048 max) - 220 bytes per conntrack
 ctnetlink v0.90: registering with nfnetlink.
 ip_conntrack_pptp version 3.1 loaded
 ip_nat_pptp version 3.0 loaded
 ip_tables: (C) 2000-2006 Netfilter Core Team
 TCP bic registered
 NET: Registered protocol family 1
 NET: Registered protocol family 17
 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
 All bugs added by David S. Miller <davem@redhat.com>
 p=squashfs
 VFS: Mounted root (squashfs filesystem) readonly.
 Freeing init memory: 76K
 sysinit....
 Using /lib/modules/cy_netfilter.ko
 Using /lib/modules/cy_fifolog.ko
 signal init ....
 init nvram....
 Name to be unset = wl0_hwaddr=00:21:29:09:6B:8F
 Name to be unset = wan_get_dns=192.168.1.1
 Name to be unset = action_service=wireless
 Name to be unset = wan_get_domain=lan
 Name to be unset = wan_get_hostname=wrp400
 restore_defaults nvram....
 New length = 8230
 The boot is UNKNOWN
 The boot is UNKNOWN
 Load CA Data
 killall: httpd: no process killed
 Using /lib/modules/led_driver.ko
 Using /lib/modules/env_driver.ko
 cy_env : Init
 cy_env : Get UBOOT MTD
 cy_env : Init Env
 cy_env : Env Version[0.1]
 cy_env : Init ENV Device Ok

 log_change....log_enable==0
 *** log_change done ***
 ++ RPPLINK: waiting on voice . . .
 RPPLINK_CLIENT_INIT_OK
 New length = 8259
 name=[eth0] lan_ifname=[br0]
 =====> set br0 hwaddr to eth0
 expect on/off for argument
 name=[wlan0] lan_ifname=[br0]
 Using /lib/modules/ap-linux.ko
 Set MVAP done...
 Configuration file: /tmp/wireless_security_file
 read mtd5
 <6>Allocate memory for User Buffer( 0xc1900000 982016[0x0efc00])
 <6>SRAM Allocation for WLAN module 0xfc015000 size 41984
 <6>MODULE: defer_triggers created: 0xc02c2000 size: 280)
 <6>MODULE: StnQingInfo? created: 0xc1d26000 size: 4760)
 <6>MODULE: AssocTable? created: 0xc1eb0000 size: 10428)
 <7>mvWLAN: Registered netdevice wlan0
 Already using this reigster handle: 0
 Alloc and Init the WLAN device
 <7>wlan0: Registered netdevice wlan0ap for AP use
 <7>wlan0: mvWLAN_open
 <7>wlan0ap: mvWLAN_open
 Using interface wlan0 with hwaddr 00:21:29:09:6b:8f and ssid 'linksys6B8F'
 Flushing old station entries
 Deauthenticate all stations
 l2_packet_receive - recvfrom: Network is down
 <7>unsupported ioctl(0x8946)
 device wlan0 entered promiscuous mode
 unsupported ioctl(0x8946)
 wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated
 wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated
 wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated
 wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated
 SIPURA: OAL module initing
 SIPURA: OAL Timer module initing
 SIPURA: OAL Timer module inited:0
 SIPURA: OAL module inited
 br0: File exists
 device wlan0 is already a member of a bridge; can't enslave it to bridge br0.
 expect on/off for argument
 WIRELESS_ON
 SYSTEM_WIRELESS_SES_SECURED
 tdu_nstd_ioctl PHONE_REC_START/PHONE_PLAY_START 1
 tdu_nstd_ioctl PHONE_REC_START/PHONE_PLAY_START 1
 tdu_nstd_ioctl PHONE_REC_START/PHONE_PLAY_START 0
 tdu_nstd_ioctl PHONE_REC_START/PHONE_PLAY_START 0
 ioctl failed: Cannot assign requested address
 br0: port 2(wlan0) entering learning state
 VObr0?: port 1(eth0) entering learning state
 ICbr0?: topology change detected, propagating
 E_br0: port 2(wlan0) entering forwarding state
 PHbr0?: topology change detected, propagating
 ONbr0?: port 1(eth0) entering forwarding state
 E1_OFF
 VOICE_PHONE2_OFF
 Busybox configured w/o syslogd
 lo: File exists
 tftpd: tftp server started
 tftpd: tftpd: standalone socket
 br0 192.168.15.100  86400
 info, udhcp server (v0.9.8-r3230) started
 ~~~~~ start upnpd ....
 zebra disabled.
 Name to be unset = wl_wsc_config_method=pin
 killall: wsc: no process killed

 J>>>>>> START WSC  >>>>>>>>>>>
 SYSTEM_LAN_UP
 get lan ipaddr:10fa8c0, netmask:ffffff
 disable nev multiple times?
 web enabled:1
 AUD_startCollectDigit(0)
 AUD_startCollectDigit(1)
 flash_task
 RPPLINK_INIT_OK
 RPPLINK SP Started
 VOICE_PHONE2_OFF
 ioctl failed: Cannot assign requested address
  MAC get =00:21:29:09:6B:8F ==================
 002129096B8F ==================

  ~~~~~~~  enrolleeInfo: auth=2000 ,encry=800 ~~~~~~~~~~

 === debug: InitWSCEnrolleeSM? ===
 Jan  1 00:00:13 : 5bUpnpd-v010 start!!!


  uuid=00212909-6b8e-0021-290a-6b8d00000000  ===================================

  ############  UPnPSetState?_WFAWLANConfig_STAStatus!!! ##############

 #########  UPnPSendEvent?   ###################

 #########  UPnPSetState?_WFAWLANConfig_APStatus   ###################

 #########  UPnPSendEvent?   ###################

  ############  UPnPSetState?_WFAWLANConfig_WLANEvent!!! ##############

 #########  UPnPSendEvent?   ###################

 === debug: InitWSCEnrolleeSM? ===
 hostapd pid is 161
 ++ RPPLINK: voice up, starting router server . . .
 router : RPPLINK SP Started
 tallest:=====( wan_or_lan=wan )=====
 tallest:=====( wan_or_lan=wan is wan !!)=====
 info, udhcp client (v0.9.8-r3230) started

 Hit enter to continue...







  login: CreateSSDPNotifySocket?(192.168.15.1)
 hostapd pid is 161
 Dumping Message Receivedap_config_commit
 :WscIE?.c--line 478, (msgLen 22)
 dd 0e 00 50 f2ap_config_commit
  04 10 4a : 00 01 10 10 44 00 01 01 :
 00 00 00 00 00 00
 Dumping Message Received:WscIE?.c--line 590, (msgLen 128)
 dd 78 00 50 f2 04 10 4a : 00 01 10 10 44 00 01 01 :
 10 3b 00 01 03 10 47 00 : 10 00 21 29 09 6b 8e 00 :
 21 29 0a 6b 8d 00 00 00 : 00 10 21 00 0c 4c 69 6e :
 6b 73 79 73 20 49 6e 63 : 2e 10 23 00 06 57 52 50 :
 34 30 30 10 24 00 07 31 : 2e 30 30 2e 30 34 10 42 :
 00 0c 43 52 33 30 31 48 : 36 30 30 33 31 35 10 54 :
 00 08 00 06 00 50 f2 04 : 00 01 10 11 00 06 57 52 :
 50 34 30 30 10 08 00 02 : 00 88 fc 77 04 00 00 00 :

 SYSTEM_WIRELESS_SES_SECURED
 ioctl failed: Cannot assign requested address
 info, Sending select for 192.168.1.169...
 ioctl failed: Cannot assign requested address
 ioctl failed: Cannot assign requested address
 ioctl failed: Cannot assign requested address
 info, (1) Lease of 192.168.1.169 obtained, lease time 43200
 New length = 8260
 New length = 8284
 New length = 8303
 received netlink event: 1 with par (5)
 eth1: No such process
 received netlink event: 2 with par (8)
 wlan0: STA ff:ff:ff:ff:ff:ff IEEE 802.11: deassociated
 br0 192.168.15.100  86400
 killall: dnsmasq: no process killed
 default gw:101a8c0
 get ip addr:192.168.1.169
 dhcp option name: dnssvr   value: 192.168.1.1
 dhcp option name: domain   value: lan
 get gw addr:192.168.1.1
 get netmask:255.255.255.0
 System started: ip@192.168.1.169, reboot reason:H0
 killall: ping: no process killed

 do re_sync_port_maping ...
 PING 192.168.1.1 (192.168.1.1): 22 data bytes
 22 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=7.2 ms
 22 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=0.7 ms
 22 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.7 ms
 killall: ping: no process killed
 PING 192.168.1.1 (192.168.1.1): 1458 data bytes
 1458 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=4.2 ms
 1458 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=2.0 ms
 1458 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.9 ms

 ping64=7 ping1500=19 count=2

 qos_rate= 51200
 BandWidth? form Ping DNS mode wan_qos_rate =[40960]
 SIOCSIFFLAGS: Cannot assign requested address
 SIOCSIFFLAGS: Cannot assign requested address
 killall: igmprt: no process killed
 start_igmp_proxy...
 received netlink event: 1 with par (4)
 +++++oldif=eth1,  newif=eth1
 received netlink event: 2 with par (4)
 +++++oldif=eth1,  newif=eth1
 received netlink event: 1 with par (4)
 +++++oldif=eth1,  newif=eth1
 received netlink event: 1 with par (8)
 +++++oldif=eth1,  newif=eth1
 received netlink event: 2 with par (8)
 +++++oldif=eth1,  newif=eth1
 received netlink event: 1 with par (8)
 +++++oldif=eth1,  newif=eth1
 We will use igmpv2

 use*** K WLAN Multicast Snooping initialized ***
  upstream interface (eth1)
 ***>> wlan0 index 8
  index[1]=lo
 *** index[4]=eth0:0
 *** index[5]=eth1
 *** index[7]=br0
 *** index[8]=wlan0:0
 ddns: stop_ddns()
 killall: ez-ipupdate: no process killed
 ddns: start_ddns()
 init_ddns() ddns_enable:0, ddns_enable_buf:
 killall: process_monitor: no process killed
 NTP-Server List: 209.81.9.7 207.46.130.100 192.36.144.23

 do re_sync_port_maping ...
 wan_dbnum=1
 lan_dbnum=0

 updateLANMacAddress(01:00:5e:00:00:01, 1,-1,-1,-1)

 updateLANMacAddress(01:00:5e:00:00:01, 1,2,3,4)

 updateLANMacAddress(01:00:5e:00:00:02, 1,-1,-1,-1)

 updateLANMacAddress(01:00:5e:00:00:02, 1,2,3,4)
 killall: zebra: no process killed
 killall: ripd: no process killed
 zebra disabled.
  do_ntp run ntpclient -h 209.81.9.7 207.46.130.100 192.36.144.23   -l -s -i 10 -c 2
 return code=0, from ntpclient

 +10,+10,+10 2 4
 Time update successfully, adjust time. (adjust:10.000000)

 Year:2009,Month:2,Day:25,Hour:19,Min:50,Sec:21

 TimeZone?:34,i=34,startm=10,endmonth=3,diffm=1,j=2
 Adjust daylight

 dstBias:3600

 ,Year:2009,Month:2,Day:25,Hour:20,Min:50,Sec:21
 We need to re-update after 3600 seconds
 606x_filter = mv606x_rx_rate
 port_no 0
 606x_filter = mv606x_tx_rate
 port_no 5
 RTNETLINK answers: No such file or directory
 RTNETLINK answers: No such file or directory

 ....rwhitby? wan_qos_rate=40960 ....
 init_rate ef_rate[20352] af1_rate[8140]af2[6105],af3[4070]af4[1221]be_rate[816]
 HTB: quantum of class 100001 is big. Consider r2q change.
 HTB: quantum of class 100010 is big. Consider r2q change.

 updateLANMa>>update group 239.255.255.250 cache vif range as 7~8
 cAddress(01:00:5e:7f:ff:fa, 1,-1,-1,-1)

 updateLANMacAddress(01:00:5e:7f:ff:fa, 1,2,3,4)
 do_qos() lan_qos_rate[0] wan_qos_rate[40960].

Note that the console state is now unlocked, and there is a two second countdown during which you can hit a key to stop the autoboot.

February 25, 2009, at 09:40 AM by rwhitby --
Changed lines 58-117 from:

The U-Boot console is not operative when the console state is locked, and it ignores any keypress to stop autoboot in that state. After the "Uncompressing Linux" line, all console output stops.

to:

The U-Boot console is not operative when the console state is locked, and it ignores any keypress to stop autoboot in that state. After the "Uncompressing Linux" line, all console output stops.

The following is the vendor bootlog for the 1.00.04c firmware after we UnlockTheConsole:

 Booting...

   _____        _               _______         _   _
  / ____|      | |             |__   __| /\    | \ | |
 | |     _   _ | |__    ___  _ __ | |   /  \   |  \| |
 | |    | | | || '_ \  / _ \| '__|| |  / /\ \  | .   |
 | |____| |_| || |_) ||  __/| |   | | / ____ \ | |\  |
  \_____|\__, ||_.__/  \___||_|   |_|/_/    \_\|_| \_|
          __/ |
         |___/
 __      __    _____  _____    _______
 \ \    / /   |_   _||  __ \  |__   __|
  \ \  / /___   | |  | |__) |    | |  ___   __ _  _ __ __ _
   \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _      \  /| (_) |_| |_ | |         | ||  __/| (_| || | | | | |
     \/  \___/|_____||_|         |_| \___| \__,_||_| |_| |_|


 MARVELL MV88W8518 AP32V.
 Based on Feroceon Core with ARM926 LE CPU(360 MHZ)


 U-Boot 1.1.1 (Sep 27 2007 - 14:42:26)
 Marvell version: 1.1.1.5 MTL

 U-Boot code: 00F00000 -> 00F1F734  BSS: -> 00F2D6F4
 RAM Configuration:
 Bank #0: 00000000 32 MB
 Flash:  8 MB
 Env Version[0.1]
 In:    serial
 Out:   serial
 Err:   serial
 nvram header magic[464c5348]
 Net:   Please wait, this takes a while ...
 eth0 [PRIME]
 --- << CONSOLE_STATE IS unlocked >> ---
  Hit any key to stop autoboot:  1
  0
 Checking Boot image at ff9c0000 ...
 ## Booting image at ff9c0000 ...
    Image Name:   cybertan_rom_bin
    Image Type:   ARM Linux Multi-File Image (uncompressed)
    Data Size:    3918104 Bytes =  3.7 MB
    Load Address: 00008000
    Entry Point:  00008000
    Contents:
    Image 0:  1005836 Bytes = 982.3 kB
    Image 1:  2912256 Bytes =  2.8 MB
 OK

 Starting kernel ...

 Uncompressing Linux..................................................................... done, booting the kernel.

Note that the console state is now unlocked, and there is a two second countdown during which you can hit a key to stop the autoboot. However, note that the kernel output is still disabled.

February 25, 2009, at 09:11 AM by rwhitby --
Added line 58:

The U-Boot console is not operative when the console state is locked, and it ignores any keypress to stop autoboot in that state. After the "Uncompressing Linux" line, all console output stops.

February 25, 2009, at 08:54 AM by rwhitby --
Changed lines 1-2 from:

The following is the vendor bootlog from the 1.0.04c firmware:

to:

The following is the vendor bootlog from the 1.00.04c firmware:

February 25, 2009, at 08:54 AM by rwhitby --
Added lines 1-2:

The following is the vendor bootlog from the 1.0.04c firmware:

February 25, 2009, at 08:53 AM by rwhitby --
Changed lines 19-20 from:
 MARVELL ==MV88W8518?== ==AP32V?==.
 Based on Feroceon Core with ==ARM926?== LE CPU(360 MHZ)
to:
 MARVELL MV88W8518 AP32V.
 Based on Feroceon Core with ARM926 LE CPU(360 MHZ)
February 25, 2009, at 08:53 AM by rwhitby --
Changed line 14 from:
   \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _  ==\==
to:
   \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _  \ 
February 25, 2009, at 08:53 AM by rwhitby --
Changed line 14 from:
   \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _  \
to:
   \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _  ==\==
Changed lines 19-20 from:
 MARVELL =MV88W8518?= =AP32V?=.
 Based on Feroceon Core with =ARM926?= LE CPU(360 MHZ)
to:
 MARVELL ==MV88W8518?== ==AP32V?==.
 Based on Feroceon Core with ==ARM926?== LE CPU(360 MHZ)
February 25, 2009, at 08:52 AM by rwhitby --
Changed lines 19-20 from:
 MARVELL MV88W8518? AP32V?.
 Based on Feroceon Core with ARM926? LE CPU(360 MHZ)
to:
 MARVELL =MV88W8518?= =AP32V?=.
 Based on Feroceon Core with =ARM926?= LE CPU(360 MHZ)
February 25, 2009, at 08:51 AM by rwhitby --
Added lines 1-55:
 Booting...

   _____        _               _______         _   _
  / ____|      | |             |__   __| /\    | \ | |
 | |     _   _ | |__    ___  _ __ | |   /  \   |  \| |
 | |    | | | || '_ \  / _ \| '__|| |  / /\ \  | .   |
 | |____| |_| || |_) ||  __/| |   | | / ____ \ | |\  |
  \_____|\__, ||_.__/  \___||_|   |_|/_/    \_\|_| \_|
          __/ |
         |___/
 __      __    _____  _____    _______
 \ \    / /   |_   _||  __ \  |__   __|
  \ \  / /___   | |  | |__) |    | |  ___   __ _  _ __ __ _
   \ \/ // _ \  | |  |  ___/     | | / _ \ / _  ||  _   _      \  /| (_) |_| |_ | |         | ||  __/| (_| || | | | | |
     \/  \___/|_____||_|         |_| \___| \__,_||_| |_| |_|


 MARVELL MV88W8518? AP32V?.
 Based on Feroceon Core with ARM926? LE CPU(360 MHZ)


 U-Boot 1.1.1 (Sep 27 2007 - 14:42:26)
 Marvell version: 1.1.1.5 MTL

 U-Boot code: 00F00000 -> 00F1F734  BSS: -> 00F2D6F4
 RAM Configuration:
 Bank #0: 00000000 32 MB
 Flash:  8 MB
 Env Version[0.1]
 In:    serial
 Out:   serial
 Err:   serial
 nvram header magic[464c5348]
 Net:   Please wait, this takes a while ...
 eth0 [PRIME]
 --- << CONSOLE_STATE IS locked >> ---
  Hit any key to stop autoboot......pass

 Checking Boot image at ff9c0000 ...
 ## Booting image at ff9c0000 ...
    Image Name:   cybertan_rom_bin
    Image Type:   ARM Linux Multi-File Image (uncompressed)
    Data Size:    3918104 Bytes =  3.7 MB
    Load Address: 00008000
    Entry Point:  00008000
    Contents:
    Image 0:  1005836 Bytes = 982.3 kB
    Image 1:  2912256 Bytes =  2.8 MB
 OK

 Starting kernel ...

 Uncompressing Linux..................................................................... done, booting the kernel.
view · edit · print · history · Last edited by rwhitby.
Originally by rwhitby.
Page last modified on February 25, 2009, at 10:05 AM