NSLU2-Linux
view · edit · print · history

If you are stuck in Maintenance Mode in Unslung 4.2, you can use the following procedure:

  1. Boot with NO DISKS.
  2. Enable Telnet through Management/telnet.cgi
  3. Telnet in as root. Password is uNSLUng
  4. mkdir /mnt/repair
  5. Exit maintenance mode through web interface as you normally would.
view · edit · print · history · Last edited by caplink811.
Originally by gerald_clark.
Page last modified on June 05, 2005, at 09:57 AM