NSLU2-Linux
view · edit · print · history

Optware.DnsMasq History

Hide minor edits - Show changes to markup

July 23, 2008, at 04:55 PM by Wary -- added problems
Changed lines 83-86 from:

@]

to:

@]

Problems:

With the oleg firmware and IPv6?, dnsmasq won't start. Is there a compile switch to disable IPv6? or a different solution?

Restore
February 23, 2008, at 11:49 PM by BrianZhou -- formatting only
Changed lines 82-83 from:
  1. end of config file
to:
  1. end of config file

@]

Restore
February 23, 2008, at 11:48 PM by BrianZhou -- formatting only
Changed lines 24-72 from:
## dns part
# filter what we send upstream
domain-needed
bogus-priv
filterwin2k
# If you don't want dnsmasq to read /etc/resolv.conf or any other
# file, getting its servers for this file instead (see below), then
# uncomment this
no-resolv
# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
# files for changes and re-read them then uncomment this.
no-poll
# Add other name servers here, with domain specs if they are for
# non-public domains.
# => Dns servers from planet.nl
server=195.121.1.34
server=195.121.1.66
# Add local-only domains here, queries in these domains are answered
# from /etc/hosts or DHCP only.
local=/your.host.name/
# If you want dnsmasq to listen for requests only on specified interfaces
# (and the loopback) give the name of the interface (eg eth0) here.
# Repeat the line for more than one interface.
#interface=
# Or you can specify which interface _not_ to listen on
except-interface=ipx0
# Set this (and domain: see below) if you want to have a domain
# automatically added to simple names in a hosts-file.
expand-hosts
## dhcp part
# enable dhcp (start,end,netmask,leasetime)
#dhcp-authoritative
dhcp-range=192.168.1.100,192.168.1.110,255.255.255.0,48h
# Always allocate the host with ethernet address 00:0E:8E:02:1B:5B
# The IP address 192.168.1.69 (this can be out of the dhcp range
dhcp-host=00:0E:8E:02:1B:5B,192.168.1.69
to:
[@
  1. dns part
  1. filter what we send upstream

domain-needed bogus-priv filterwin2k

  1. If you don't want dnsmasq to read /etc/resolv.conf or any other
  2. file, getting its servers for this file instead (see below), then
  3. uncomment this

no-resolv

  1. If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
  2. files for changes and re-read them then uncomment this.

no-poll

  1. Add other name servers here, with domain specs if they are for
  2. non-public domains.
  3. => Dns servers from planet.nl

server=195.121.1.34 server=195.121.1.66

  1. Add local-only domains here, queries in these domains are answered
  2. from /etc/hosts or DHCP only.

local=/your.host.name/

  1. If you want dnsmasq to listen for requests only on specified interfaces
  2. (and the loopback) give the name of the interface (eg eth0) here.
  3. Repeat the line for more than one interface.
  4. interface=
  5. Or you can specify which interface _not_ to listen on

except-interface=ipx0

  1. Set this (and domain: see below) if you want to have a domain
  2. automatically added to simple names in a hosts-file.

expand-hosts

  1. dhcp part
  1. enable dhcp (start,end,netmask,leasetime)
  2. dhcp-authoritative

dhcp-range=192.168.1.100,192.168.1.110,255.255.255.0,48h

  1. Always allocate the host with ethernet address 00:0E:8E:02:1B:5B
  2. The IP address 192.168.1.69 (this can be out of the dhcp range

dhcp-host=00:0E:8E:02:1B:5B,192.168.1.69

Changed lines 74-82 from:
# dhcp lease file
dhcp-leasefile=/tmp/dhcp.leases
#default gateway ip (modem)
dhcp-option=3,192.168.1.1
# default dns server (the ip from the nslu2)
dhcp-option=6,192.168.1.77
## end of config file
to:
  1. dhcp lease file

dhcp-leasefile=/tmp/dhcp.leases

  1. default gateway ip (modem)

dhcp-option=3,192.168.1.1

  1. default dns server (the ip from the nslu2)

dhcp-option=6,192.168.1.77

  1. end of config file
Restore
March 04, 2006, at 09:45 PM by mika --
Changed lines 15-82 from:
  • edit /etc/dnsmasque.conf to configure all dns and dhcp settings.
to:
  • edit /opt/etc/dnsmasque.conf to configure all dns and dhcp settings.



Dnsmasque.conf:

## dns part
# filter what we send upstream
domain-needed
bogus-priv
filterwin2k
# If you don't want dnsmasq to read /etc/resolv.conf or any other
# file, getting its servers for this file instead (see below), then
# uncomment this
no-resolv
# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
# files for changes and re-read them then uncomment this.
no-poll
# Add other name servers here, with domain specs if they are for
# non-public domains.
# => Dns servers from planet.nl
server=195.121.1.34
server=195.121.1.66
# Add local-only domains here, queries in these domains are answered
# from /etc/hosts or DHCP only.
local=/your.host.name/
# If you want dnsmasq to listen for requests only on specified interfaces
# (and the loopback) give the name of the interface (eg eth0) here.
# Repeat the line for more than one interface.
#interface=
# Or you can specify which interface _not_ to listen on
except-interface=ipx0
# Set this (and domain: see below) if you want to have a domain
# automatically added to simple names in a hosts-file.
expand-hosts
## dhcp part
# enable dhcp (start,end,netmask,leasetime)
#dhcp-authoritative
dhcp-range=192.168.1.100,192.168.1.110,255.255.255.0,48h
# Always allocate the host with ethernet address 00:0E:8E:02:1B:5B
# The IP address 192.168.1.69 (this can be out of the dhcp range
dhcp-host=00:0E:8E:02:1B:5B,192.168.1.69
# dhcp lease file
dhcp-leasefile=/tmp/dhcp.leases
#default gateway ip (modem)
dhcp-option=3,192.168.1.1
# default dns server (the ip from the nslu2)
dhcp-option=6,192.168.1.77
## end of config file
Restore
November 07, 2005, at 02:03 AM by Jelle -- quick installation guide
Changed lines 9-15 from:
to:

Installing:

  1. ipkg update
  2. ipkg install dnsmasq

Configuring:

  • edit /etc/hosts to add hosts to the dns.
  • edit /etc/dnsmasque.conf to configure all dns and dhcp settings.
Restore
October 24, 2004, at 06:02 AM by Gerald L Clark --
Changed lines 1-9 from:

Describe DnsMasq here.

to:

Dnsmasq is a combination DNS and DHCP server.
IP addresses handed out to DHCP clients are automatically added to the name service.
Configuration is easy.

  • Upstream name servers are read from the configuration file.
  • Local addresses are read from a host file ( default /etc/hosts .)
  • DHCP address ranges and static reservations are read from the configuration file.
Restore
view · edit · print · history · Last edited by Wary.
Based on work by BrianZhou, mika, and Jelle.
Originally by Gerald L Clark.
Page last modified on July 23, 2008, at 04:55 PM