NSLU2-Linux
view · edit · print · history

Optware.Amule History

Hide minor edits - Show changes to markup

September 10, 2007, at 03:42 PM by Federico --
Changed lines 13-19 from:

The program will exit leaving /opt/share/amule/.amule/amule.conf that must be co nfigured.

I recommend to disable IPFiltering in /opt/share/amule/.amule/amule.conf for saving resources.

Provide some servers from http://www.server-met.de/ as opt/share/amule/.amule/server.met file.

to:

The program will exit leaving /opt/share/amule/.aMule/amule.conf that must be configured.

I recommend to disable IPFiltering in /opt/share/amule/.aMule/amule.conf for saving resources.

Provide some servers from http://www.server-met.de/ as opt/share/amule/.aMule/server.met file.

Changed line 62 from:

This creates opt/share/amule/.amule/remote.conf which needs passwords to be entered. Contents should be like:

to:

This creates opt/share/amule/.aMule/remote.conf which needs passwords to be entered. Contents should be like:

Restore
August 18, 2007, at 03:32 PM by ecipo --
Changed line 108 from:
 1. Kill amuled (run /opt/etc/inid.d/S57amuled stop)
to:
 1. Kill amuled (run /opt/etc/init.d/S57amuled stop)
Changed line 125 from:
 1. Kill amuled (run /opt/etc/inid.d/S57amuled stop)
to:
 1. Kill amuled (run /opt/etc/init.d/S57amuled stop)
Changed line 143 from:
 5. Start amuled (run /opt/etc/inid.d/S57amuled start)
to:
 5. Start amuled (run /opt/etc/init.d/S57amuled start)
Restore
August 18, 2007, at 03:31 PM by ecipo --
Changed line 121 from:
 4. Start amuled (run /opt/etc/inid.d/S57amuled start)
to:
 4. Start amuled (run /opt/etc/init.d/S57amuled start)
Restore
June 06, 2007, at 05:37 PM by Trurl --
Changed line 108 from:
 1. Kill amuled (run /opt/etc/inid.d/S57emuled stop)
to:
 1. Kill amuled (run /opt/etc/inid.d/S57amuled stop)
Changed line 121 from:
 4. Start amuled (run /opt/etc/inid.d/S57emuled start)
to:
 4. Start amuled (run /opt/etc/inid.d/S57amuled start)
Changed line 125 from:
 1. Kill amuled (run /opt/etc/inid.d/S57emuled stop)
to:
 1. Kill amuled (run /opt/etc/inid.d/S57amuled stop)
Changed line 143 from:
 5. Start amuled (run /opt/etc/inid.d/S57emuled start)
to:
 5. Start amuled (run /opt/etc/inid.d/S57amuled start)
Restore
June 06, 2007, at 05:36 PM by Trurl --
Changed line 144 from:
 6. You use proxy now
to:
 6. You use proxy now. But one of above three ports is not accessible from the server so you get "Low ID".
Restore
June 04, 2007, at 04:51 PM by fcarolo -- removed false wikilinks
Changed line 109 from:
 2. Find [WebServer?] section in /opt/share/amule/.aMule/amule.conf
to:
 2. Find [WebServer] section in /opt/share/amule/.aMule/amule.conf
Changed lines 139-140 from:
     0 SOCS5? (it works for sure)
     1 SOCS4?
to:
     0 SOCS5 (it works for sure)
     1 SOCS4
Changed line 142 from:
     3 SOCS4a?
to:
     3 SOCS4a
Restore
June 04, 2007, at 02:52 PM by Trurl --
Changed lines 122-123 from:
 5. You can now connect to web server running in bcakground with address like http://<<your NSLU2 IP>>:4711/
to:
 5. You can now connect to amule web server running in background with address like http://<<your NSLU2 IP>>:4711/
Changed line 139 from:
     0 SOCS5?
to:
     0 SOCS5? (it works for sure)
Restore
June 04, 2007, at 02:51 PM by Trurl --
Changed lines 122-123 from:
 5. You can now connect to server with address like http://<<your NSLU2 IP>>:4711/
to:
 5. You can now connect to web server running in bcakground with address like http://<<your NSLU2 IP>>:4711/
Restore
June 04, 2007, at 02:50 PM by Trurl --
Changed line 109 from:
 2. Find [WebSerevr?] section in /opt/share/amule/.aMule/amule.conf
to:
 2. Find [WebServer?] section in /opt/share/amule/.aMule/amule.conf
Restore
June 04, 2007, at 02:45 PM by Trurl --
Added lines 95-106:

AmuleCMD

AmuleCMD provides a commandline access to the amuled.

Just run it (having AmuleWEB configured before and having HOME=/opt/share/amule): 

 $ amulecmd

You would be asked for the password you have choosen before.

Then type 'help' to list available commands.

ConfiguringAmuled

Changed line 108 from:
 1. Kill amuled (run /opt/etc/inid.d/S57emuled stop),
to:
 1. Kill amuled (run /opt/etc/inid.d/S57emuled stop)
Changed lines 124-128 from:

AmuleCMD

AmuleCMD provides a commandline access to the amuled.

Just run it (having AmuleWEB configured before and having HOME=/opt/share/amule): [@ $ amulecmd

to:

Using proxy: 

 1. Kill amuled (run /opt/etc/inid.d/S57emuled stop)
 2. Find [Proxy] section in /opt/share/amule/.aMule/amule.conf
 3. Set options like this:

[@ [Proxy] 

 ProxyEnableProxy?=1
 ProxyType?=_set_proxy_type_ (see proxy types below)
 ProxyName?=_put_your_proxy_address_here_
 ProxyPort?=_put_your_proxy_port_here_
 ProxyEnablePassword?=0
 ProxyUser?=
 ProxyPassword?=
Changed lines 137-140 from:

You would be asked for the password you have choosen before.

Then type 'help' to list available commands.

to:
 4. Important: Proxy types are:
    -1 NONE
     0 SOCS5?
     1 SOCS4?
     2 HTTP
     3 SOCS4a?
 5. Start amuled (run /opt/etc/inid.d/S57emuled start)
 6. You use proxy now
Restore
June 04, 2007, at 02:38 PM by Trurl --
Changed lines 96-98 from:

1. Kill amuled (run /opt/etc/inid.d/S57emuled stop), 2. Find [WebSerevr?] section in /opt/share/amule/.aMule/amule.conf 3. Set options like this:

to:
 1. Kill amuled (run /opt/etc/inid.d/S57emuled stop),
 2. Find [WebSerevr?] section in /opt/share/amule/.aMule/amule.conf
 3. Set options like this:
Changed lines 109-111 from:

4. Start amuled (run /opt/etc/inid.d/S57emuled start) 5. You can now connect to server with address like http://<<your NSLU2 IP>>:4711/

to:
 4. Start amuled (run /opt/etc/inid.d/S57emuled start)
 5. You can now connect to server with address like http://<<your NSLU2 IP>>:4711/
Restore
June 04, 2007, at 02:37 PM by Trurl --
Deleted lines 81-82:

** note from Trurl: I do not know: 1) how to run amuleweb in background 2) how to automatically run it on NSLU2 start up.

Added lines 95-111:

You can make amuleweb starting together with amuled. To do so: 1. Kill amuled (run /opt/etc/inid.d/S57emuled stop), 2. Find [WebSerevr?] section in /opt/share/amule/.aMule/amule.conf 3. Set options like this: 

 [WebServer]
 Enabled=1
 Password=_here_paste_the_string_you_got_while_generating_password_string_
 PasswordLow=
 Port=4711
 UseGzip=1
 UseLowRightsUser=0
 PageRefreshTime=120
 Template=

4. Start amuled (run /opt/etc/inid.d/S57emuled start) 5. You can now connect to server with address like http://<<your NSLU2 IP>>:4711/

Restore
May 17, 2007, at 02:40 PM by fcarolo -- formatting, removed false wikilinks
Changed lines 16-17 from:

I recommend to disable IPFiltering? in /opt/share/amule/.amule/amule.conf for saving resources.

to:

I recommend to disable IPFiltering in /opt/share/amule/.amule/amule.conf for saving resources.

Changed lines 52-54 from:

AmuleWEB?

AmuleWEB? is lightweight HTTP server with PHP like command language tailored for

to:

AmuleWEB

AmuleWEB is lightweight HTTP server with PHP like command language tailored for

Changed line 58 from:

AmuleWEB? connnect to amuled with protocol as amulecmd. To create connection you need to export HOME again (required after restarting NSLU2) and then extract config from amule.conf:

to:

AmuleWEB connnect to amuled with protocol as amulecmd. To create connection you need to export HOME again (required after restarting NSLU2) and then extract config from amule.conf:

Changed line 84 from:

You can now connect to server with address like http://<<your NSLU2 IP>>:4711/ and you get log

to:

You can now connect to server with address like http://<<your NSLU2 IP>>:4711/ and you get log

Changed lines 97-100 from:

AmuleCMD?

AmuleCMD? provides a commandline access to the amuled.

Just run it (having AmuleWEB? configured before and having HOME=/opt/share/amule):

to:

AmuleCMD

AmuleCMD provides a commandline access to the amuled.

Just run it (having AmuleWEB configured before and having HOME=/opt/share/amule):

Restore
May 17, 2007, at 12:41 PM by Trurl --
Deleted lines 83-84:

You would be asked for the password you have choosen before.

Restore
May 17, 2007, at 12:41 PM by Trurl --
Added lines 84-85:

You would be asked for the password you have choosen before.

Changed line 102 from:

Just run it (having HOME=/opt/share/amule):

to:

Just run it (having AmuleWEB? configured before and having HOME=/opt/share/amule):

Changed lines 106-107 from:

You would be asked for the password you havechoosen before.

to:

You would be asked for the password you have choosen before.

Restore
May 17, 2007, at 12:39 PM by Trurl --
Changed lines 50-51 from:

If everything is fine - restart your NSLU2. This will start amule deamon.

to:

If everything is fine - restart your NSLU2. This will start amule deamon. Attention - this will reset your HOME variable.

Restore
May 17, 2007, at 12:36 PM by Trurl --
Changed lines 50-53 from:

If everything is fine - restart your NSLU2: 

 $ amuled
to:

If everything is fine - restart your NSLU2. This will start amule deamon.

Restore
May 17, 2007, at 12:34 PM by Trurl --
Changed lines 3-4 from:

First install amule optware package

to:

First install amule optware package.

Changed line 60 from:

AmuleWEB? connnect to amuled with protocol as amulecmd. To create connection you need to export HOME again (required after restarting NSLU2) and then extract config from amule.conf with command

to:

AmuleWEB? connnect to amuled with protocol as amulecmd. To create connection you need to export HOME again (required after restarting NSLU2) and then extract config from amule.conf:

Restore
May 17, 2007, at 12:34 PM by Trurl --
Changed line 60 from:

AmuleWEB? connnect to amuled with protocol as amulecmd. To create connection you need to export HOME again (required after restarting NSLU2) and extract config from amule.conf with command

to:

AmuleWEB? connnect to amuled with protocol as amulecmd. To create connection you need to export HOME again (required after restarting NSLU2) and then extract config from amule.conf with command

Restore
May 17, 2007, at 12:33 PM by Trurl --
Added lines 50-53:

If everything is fine - restart your NSLU2: 

 $ amuled
Changed lines 60-61 from:

AmuleWEB? connnect to amuled with protocol as amulecmd. To create connection you need to extract config from amule.conf with command

to:

AmuleWEB? connnect to amuled with protocol as amulecmd. To create connection you need to export HOME again (required after restarting NSLU2) and extract config from amule.conf with command [@ $ export HOME=/opt/share/amule

Changed lines 63-64 from:

This creates opt/share/amule/.amule/remote.conf (assuming HOME=/opt/share/amule) which needs passwords to be entered. Contents should be like:

to:

@]

This creates opt/share/amule/.amule/remote.conf which needs passwords to be entered. Contents should be like:

Restore
May 17, 2007, at 12:28 PM by Trurl --
Changed lines 28-29 from:

or for any password_you_want with: [@ $ echo -n password_you_want | md5sum | cut -d ' ' -f 1

to:

or for any _password_you_want_ with: [@ $ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1

Restore
May 17, 2007, at 12:27 PM by Trurl --
Changed lines 28-29 from:

or for any 'password_you_want' with: [@ $ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1

to:

or for any password_you_want with: [@ $ echo -n password_you_want | md5sum | cut -d ' ' -f 1

Restore
May 17, 2007, at 12:26 PM by Trurl --
Changed line 21 from:

[@ $ echo -n amule | md5sum | cut -d ' ' -f 1

to:

[@ $ echo -n amule | md5sum | cut -d ' ' -f 1

Changed line 25 from:

[@ $ echo -n nslu2 | md5sum | cut -d ' ' -f 1

to:

[@ $ echo -n nslu2 | md5sum | cut -d ' ' -f 1

Changed line 29 from:

[@ $ echo -n 'password_you_want' | md5sum | cut -d ' ' -f 1

to:

[@ $ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1

Changed line 39 from:
 ECPassword?='here_paste_the_string_you_got_while_generating_password_string'
to:
 ECPassword?=_here_paste_the_string_you_got_while_generating_password_string_
Changed line 65 from:
 Password='here_paste_the_string_you_got_while_generating_password_string'
to:
 Password=_here_paste_the_string_you_got_while_generating_password_string_
Changed lines 71-72 from:
 AdminPassword?='here_paste_the_string_you_got_while_generating_password_string'
 GuestPassword?='here_paste_the_string_you_got_while_generating_password_string'
to:
 AdminPassword?=_here_paste_the_string_you_got_while_generating_password_string_
 GuestPassword?=_here_paste_the_string_you_got_while_generating_password_string_
Restore
May 17, 2007, at 12:25 PM by Trurl --
Changed lines 20-21 from:

Generate string for password 'amule' with [@ $ echo -n amule | md5sum | cut -d ' ' -f 1

to:

Generate string for password amule with [@ $ echo -n amule | md5sum | cut -d ' ' -f 1

Changed lines 24-25 from:

or maybe for password 'nslu2' with [@ $ echo -n nslu2 | md5sum | cut -d ' ' -f 1

to:

or maybe for password nslu2 with [@ $ echo -n nslu2 | md5sum | cut -d ' ' -f 1

Changed lines 28-29 from:

or for any _password_you_want_ with: [@ $ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1

to:

or for any 'password_you_want' with: [@ $ echo -n 'password_you_want' | md5sum | cut -d ' ' -f 1

Changed line 39 from:
 ECPassword?=_here_paste_the_string_you_got_while_generating_password_string_
to:
 ECPassword?='here_paste_the_string_you_got_while_generating_password_string'
Changed line 65 from:
 Password=_here_paste_the_string_you_got_while_generating_password_string_
to:
 Password='here_paste_the_string_you_got_while_generating_password_string'
Changed lines 71-72 from:
 AdminPassword?=_here_paste_the_string_you_got_while_generating_password_string_
 GuestPassword?=_here_paste_the_string_you_got_while_generating_password_string_
to:
 AdminPassword?='here_paste_the_string_you_got_while_generating_password_string'
 GuestPassword?='here_paste_the_string_you_got_while_generating_password_string'
Changed line 81 from:

You can now connect to server with address like http://<<your NSLU2 ip>>:4711/ and you get log

to:

You can now connect to server with address like http://<<your NSLU2 IP>>:4711/ and you get log

Restore
May 17, 2007, at 12:23 PM by Trurl --
Changed line 56 from:

AmuleWEB? connnect so amuled with protocol as amulecmd. To create connection you

to:

AmuleWEB? connnect to amuled with protocol as amulecmd. To create connection you

Added lines 94-103:

AmuleCMD?

AmuleCMD? provides a commandline access to the amuled.

Just run it (having HOME=/opt/share/amule): 

 $ amulecmd

You would be asked for the password you havechoosen before.

Then type 'help' to list available commands.

Restore
May 17, 2007, at 12:15 PM by Trurl --
Changed line 43 from:

Forward three external (WAN) ports to your NSLU2 ip: TCP 4662, UDP 4672 & UDP 4665.

to:

Forward three external (WAN) ports to IP of your NSLU2: TCP 4662, UDP 4672 & UDP 4665.

Restore
May 17, 2007, at 12:14 PM by Trurl --
Changed lines 60-61 from:

This creates opt/share/amule/.amule/remote.conf (assuming HOME=/opt/share/amule) which needs passwords to be ente red. Contents should be like:

to:

This creates opt/share/amule/.amule/remote.conf (assuming HOME=/opt/share/amule) which needs passwords to be entered. Contents should be like:

Restore
May 17, 2007, at 12:13 PM by Trurl --
Deleted line 61:
Restore
May 17, 2007, at 12:12 PM by Trurl --
Changed lines 81-84 from:

''** note from Trurl: I do not know: 1) how to run amuleweb in background 2) how to automatically run it on NSLU2 start up.''

to:

** note from Trurl: I do not know: 1) how to run amuleweb in background 2) how to automatically run it on NSLU2 start up.

Restore
May 17, 2007, at 12:11 PM by Trurl --
Changed line 81 from:
  • note from Trurl: I do not know:
to:

''** note from Trurl: I do not know:

Changed lines 83-84 from:

2) how to automatically run it on NSLU2 start up.

to:

2) how to automatically run it on NSLU2 start up.''

Restore
May 17, 2007, at 12:09 PM by Trurl --
Added lines 81-84:
  • note from Trurl: I do not know:

1) how to run amuleweb in background 2) how to automatically run it on NSLU2 start up.

Restore
May 17, 2007, at 12:07 PM by Trurl --
Changed lines 85-86 from:

Enter the password (not a password string) you have choosen while generating password string. Main page shows current status:

to:

Enter the password (not a password string) you have choosen while generating password string. After that main page shows current status:

Deleted line 88:
Deleted line 91:
Restore
May 17, 2007, at 12:06 PM by Trurl --
Added lines 77-80:

Then run amuleweb (still having HOME=/opt/share/amule): 

 $ amuleweb
Restore
May 17, 2007, at 12:04 PM by Trurl --
Added line 81:

Enter the password (not a password string) you have choosen while generating password string.

Restore
May 17, 2007, at 12:03 PM by Trurl --
Changed line 77 from:

You can now connect to server with address like http://<your NSLU2 ip>:4711/ and you get log

to:

You can now connect to server with address like http://<<your NSLU2 ip>>:4711/ and you get log

Restore
May 17, 2007, at 12:02 PM by Trurl --
Changed lines 46-47 from:

Run amuled again to test the configuration.

to:

Run amuled again to test the configuration: 

 $ amuled
Restore
May 17, 2007, at 12:01 PM by Trurl --
Changed lines 44-45 from:
to:

See http://www.amule.org/wiki/index.php/Firewall to findout how to setup routers and firewalls.

Restore
May 17, 2007, at 12:01 PM by Trurl --
Changed lines 45-46 from:
  • Run amuled again to test the configuration.
to:

Run amuled again to test the configuration.

Restore
May 17, 2007, at 11:59 AM by Trurl --
Changed lines 43-44 from:
  • Forward three external (WAN) ports to your NSLU2 ip: TCP 4662, UDP 4672 & UDP 4665.
to:

Forward three external (WAN) ports to your NSLU2 ip: TCP 4662, UDP 4672 & UDP 4665.

Restore
May 17, 2007, at 11:51 AM by Trurl --
Changed line 34 from:

Enter saved string in amule.conf:

to:

Enter saved password string in amule.conf:

Restore
May 17, 2007, at 11:50 AM by Trurl --
Changed lines 14-16 from:

nfigured. I recommend to disable IPFiltering? for saving resources. Provide some servers from ed2k.2x4u.de as opt/share/amule/.amule/server.met file.

to:

nfigured.

I recommend to disable IPFiltering? in /opt/share/amule/.amule/amule.conf for saving resources.

Provide some servers from http://www.server-met.de/ as opt/share/amule/.amule/server.met file.

Changed lines 35-36 from:

[@ 

 [ExternalConnect?]
to:

[@ [ExternalConnect?]

Restore
May 17, 2007, at 11:47 AM by Trurl --
Changed lines 3-10 from:
  • First install amule optware package
  • Then run (needed for creating configuration's files, there is a script in /opt/

etc/init.d that will start amule later) : $ export HOME=/opt/share/amule

  • then run amuled:

$ amuled

to:

First install amule optware package

Then run (needed for creating configuration's files, there is a script in /opt/ etc/init.d that will start amule later): 

 $ export HOME=/opt/share/amule

Then run amuled: 

 $ amuled
Changed line 17 from:
  • Generate string for password 'amule' with
to:

Generate string for password 'amule' with

Changed lines 19-20 from:
 ef7628c92bff39c0b3532d36a617cf09 @]
to:
 ef7628c92bff39c0b3532d36a617cf09

@]

Changed lines 23-24 from:
 e3e943fa08ef7db999e74dea083528a8 @]
to:
 e3e943fa08ef7db999e74dea083528a8

@]

Changed lines 28-30 from:

and then save somewhere the password string you get.

  • enter saved string in amule.conf:[@
to:

Save somewhere the password string you get.

Enter saved string in amule.conf: [@

Restore
May 17, 2007, at 11:45 AM by Trurl --
Changed lines 3-5 from:

First run (needed for creating configuration's files, there is a script in /opt/

to:
  • First install amule optware package
  • Then run (needed for creating configuration's files, there is a script in /opt/
Changed lines 7-10 from:
  • export HOME=/opt/share/amule
  • run 'amuled --even-if-lfroen-complains-this-will-stay'
The program will exit leaving /opt/share/amule/.amule/amule.conf that must be co
to:

$ export HOME=/opt/share/amule

  • then run amuled:

$ amuled The program will exit leaving /opt/share/amule/.amule/amule.conf that must be co

Added line 14:
Changed lines 22-23 from:

$ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1

to:
 $ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1
Changed lines 25-26 from:
  • enter saved string in amule.conf

[@

to:
  • enter saved string in amule.conf:[@
Added line 34:
Added line 36:
Restore
May 17, 2007, at 11:42 AM by Trurl --
Changed line 18 from:

[@ $ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1]

to:

$ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1

Restore
May 17, 2007, at 11:41 AM by Trurl --
Changed line 11 from:
  • Create password 'amule' with
to:
  • Generate string for password 'amule' with
Changed line 14 from:

or maybe password 'nslu2' with

to:

or maybe for password 'nslu2' with

Changed lines 17-20 from:

or any _password_you_want_ with: [@ $ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1 then copy a string you got.

  • enter copied string in amule.conf
to:

or for any _password_you_want_ with: [@ $ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1] and then save somewhere the password string you get.

  • enter saved string in amule.conf
Changed line 26 from:
 ECPassword?=_here_paste_the_string_you_got_
to:
 ECPassword?=_here_paste_the_string_you_got_while_generating_password_string_
Changed line 29 from:
  • Forward three external (WAN) ports to your NSLU2 ip: TCP 4662, UDP 4672, UDP 4665.
to:
  • Forward three external (WAN) ports to your NSLU2 ip: TCP 4662, UDP 4672 & UDP 4665.
Deleted lines 37-40:

You connect to server with address like http://192.168.1.1:4711/ and you get log in screen like this: http://img136.imageshack.us/img136/420/amulewebloginjg3.png

Changed lines 42-44 from:

This creates opt/share/amule/.amule/remote.conf which needs passwords to be ente red. Contents should be like

to:

This creates opt/share/amule/.amule/remote.conf (assuming HOME=/opt/share/amule) which needs passwords to be ente red. Contents should be like:

Changed line 49 from:
 Password=e3e943fa08ef7db999e74dea083528a8
to:
 Password=_here_paste_the_string_you_got_while_generating_password_string_
Changed lines 55-56 from:
 AdminPassword?=e3e943fa08ef7db999e74dea083528a8
 GuestPassword?=e3e943fa08ef7db999e74dea083528a8
to:
 AdminPassword?=_here_paste_the_string_you_got_while_generating_password_string_
 GuestPassword?=_here_paste_the_string_you_got_while_generating_password_string_
Added lines 59-62:

You can now connect to server with address like http://<your NSLU2 ip>:4711/ and you get log in screen like this: http://img136.imageshack.us/img136/420/amulewebloginjg3.png

Deleted line 63:
Restore
May 17, 2007, at 11:34 AM by Trurl --
Changed line 11 from:
  • Create password with
to:
  • Create password 'amule' with
Changed line 14 from:

or maybe 'nslu2' with

to:

or maybe password 'nslu2' with

Changed lines 17-20 from:
  • enter created password in amule.conf
to:

or any _password_you_want_ with: [@ $ echo -n _password_you_want_ | md5sum | cut -d ' ' -f 1 then copy a string you got.

  • enter copied string in amule.conf
Changed line 26 from:
 ECPassword?=de3e943fa08ef7db999e74dea083528a8
to:
 ECPassword?=_here_paste_the_string_you_got_
Restore
May 17, 2007, at 11:30 AM by Trurl --
Changed lines 26-28 from:
  • Forward ports.
  • Run it again to test the configuration.
to:
  • Forward three external (WAN) ports to your NSLU2 ip: TCP 4662, UDP 4672, UDP 4665.
  • Run amuled again to test the configuration.
Restore
January 07, 2007, at 12:57 PM by oleo --
Changed lines 6-7 from:
  1. export HOME=/opt/share/amule
  2. run 'amuled --even-if-lfroen-complains-this-will-stay'
to:
  • export HOME=/opt/share/amule
  • run 'amuled --even-if-lfroen-complains-this-will-stay'
Changed line 11 from:
  1. Create password with
to:
  • Create password with
Changed line 17 from:
  1. enter created password in amule.conf
to:
  • enter created password in amule.conf
Changed lines 26-28 from:
  1. Forward ports.
  2. Run it again to test the configuration.
to:
  • Forward ports.
  • Run it again to test the configuration.
Restore
January 07, 2007, at 12:56 PM by oleo --
Changed line 8 from:

The program will exit leaving /opt/share/amule/.amule/amule.conf that must be co

to:
The program will exit leaving /opt/share/amule/.amule/amule.conf that must be co
Restore
January 07, 2007, at 12:55 PM by oleo --
Deleted line 7:
Deleted line 16:
Deleted line 25:
Deleted line 26:
Restore
January 07, 2007, at 12:54 PM by oleo --
Changed lines 6-8 from:
  • export HOME=/opt/share/amule
  • run 'amuled --even-if-lfroen-complains-this-will-stay'
to:
  1. export HOME=/opt/share/amule
  2. run 'amuled --even-if-lfroen-complains-this-will-stay'
Changed lines 12-14 from:
  • Create password with 
 $ echo -n amule | md5sum | cut -d ' ' -f 1
 ef7628c92bff39c0b3532d36a617cf09
to:
  1. Create password with 
 $ echo -n amule | md5sum | cut -d ' ' -f 1
 ef7628c92bff39c0b3532d36a617cf09
Changed lines 16-19 from:
 $ echo -n nslu2 | md5sum | cut -d ' ' -f 1
 e3e943fa08ef7db999e74dea083528a8
  • enter created password in amule.conf
to:
 $ echo -n nslu2 | md5sum | cut -d ' ' -f 1
 e3e943fa08ef7db999e74dea083528a8
  1. enter created password in amule.conf
Changed lines 29-32 from:
  • Forward ports.I have problems with the udp-forwarding when the amule runs at w

l500gp that acts as a router - kademlia is always firewalled (?)

  • Run it again to test the configuration.
to:
  1. Forward ports.
  2. Run it again to test the configuration.
Restore
January 07, 2007, at 12:51 PM by oleo --
Added line 20:

[@

Changed lines 27-28 from:
to:

@]

Changed lines 49-50 from:
 Locale=
to:

[@ Locale=

Changed lines 62-63 from:
to:

@]

Restore
January 07, 2007, at 12:48 PM by oleo --
Added lines 19-30:
  • enter created password in amule.conf 
 [ExternalConnect?]
 AcceptExternalConnections?=1 
 ECAddress?=
 ECPort?=4712
 ECPassword?=de3e943fa08ef7db999e74dea083528a8
 ShowProgressBar?=1
  • Forward ports.I have problems with the udp-forwarding when the amule runs at w

l500gp that acts as a router - kademlia is always firewalled (?)

  • Run it again to test the configuration.
Restore
January 07, 2007, at 12:47 PM by oleo --
Changed lines 3-4 from:

First run (needed for creating configuration's files, there is a script in /opt/etc/init.d that will start amule later) :

to:

First run (needed for creating configuration's files, there is a script in /opt/ etc/init.d that will start amule later) :

Changed lines 9-11 from:

The program will exit leaving /opt/share/amule/.amule/amule.conf that must be configured. I recommend to disable IPFiltering? for saving resources. Provide some servers from http://ed2k.2x4u.de/index.html as server.met file.

to:

The program will exit leaving /opt/share/amule/.amule/amule.conf that must be co nfigured. I recommend to disable IPFiltering? for saving resources. Provide some servers from ed2k.2x4u.de as opt/share/amule/.amule/server.met file.

Changed lines 18-21 from:
  • Forward ports.I have problems with the udp-forwarding when the amule runs at wl500gp that acts as a router - kademlia is always firewalled (?)
  • Run it again to test the configuration.
to:
Restore
January 07, 2007, at 12:46 PM by oleo -- images
Added lines 47-59:

Main page shows current status:

http://img208.imageshack.us/img208/4025/amulewebmainlg6.png

Search is performed with the following interface:

http://img208.imageshack.us/img208/2729/amulesearchwu1.png

Transfer graphing and status page:

http://img214.imageshack.us/img214/8922/amulewebtransferrm6.png

Restore
January 07, 2007, at 12:45 PM by oleo --
Added lines 29-46:

AmuleWEB? connnect so amuled with protocol as amulecmd. To create connection you need to extract config from amule.conf with command 

 $ amuleweb -w

This creates opt/share/amule/.amule/remote.conf which needs passwords to be ente red. Contents should be like 

 Locale= 
 [EC]
 Host=localhost
 Port=4712
 Password=e3e943fa08ef7db999e74dea083528a8
 [Webserver]
 Port=-1
 Template=php-default
 UseGzip?=0
 AllowGuest?=0
 AdminPassword?=e3e943fa08ef7db999e74dea083528a8
 GuestPassword?=e3e943fa08ef7db999e74dea083528a8
Restore
January 07, 2007, at 12:41 PM by oleo --
Added lines 24-28:

You connect to server with address like http://192.168.1.1:4711/ and you get log in screen like this: http://img136.imageshack.us/img136/420/amulewebloginjg3.png

Restore
January 07, 2007, at 12:40 PM by oleo --
Changed lines 19-23 from:

AmuleWEB?

to:

AmuleWEB?

AmuleWEB? is lightweight HTTP server with PHP like command language tailored for amule scripts only. It takes little memory resources.

Restore
January 07, 2007, at 12:32 PM by oleo --
Added line 18:
Restore
January 07, 2007, at 11:14 AM by oleo --
Added line 7:
Changed lines 9-14 from:

Don't know why but only few of those servers work for me. Or connect for ex. to DonkeyServer? No6 [62.241.53.15:4242]

to:
  • Create password with 
 $ echo -n amule | md5sum | cut -d ' ' -f 1
 ef7628c92bff39c0b3532d36a617cf09

or maybe 'nslu2' with 

 $ echo -n nslu2 | md5sum | cut -d ' ' -f 1
 e3e943fa08ef7db999e74dea083528a8
Restore
January 07, 2007, at 09:23 AM by oleo -- intro
Added lines 1-12:

eMule-like client for the eD2k and Kademlia networks

First run (needed for creating configuration's files, there is a script in /opt/etc/init.d that will start amule later) :

  • export HOME=/opt/share/amule
  • run 'amuled --even-if-lfroen-complains-this-will-stay'

The program will exit leaving /opt/share/amule/.amule/amule.conf that must be configured. I recommend to disable IPFiltering? for saving resources. Provide some servers from http://ed2k.2x4u.de/index.html as server.met file. Don't know why but only few of those servers work for me. Or connect for ex. to DonkeyServer? No6 [62.241.53.15:4242]

  • Forward ports.I have problems with the udp-forwarding when the amule runs at wl500gp that acts as a router - kademlia is always firewalled (?)
  • Run it again to test the configuration.

AmuleWEB?

Restore
view · edit · print · history · Last edited by Federico.
Based on work by ecipo, Trurl, fcarolo, and oleo.
Originally by oleo.
Page last modified on September 10, 2007, at 03:42 PM