NSLU2-Linux
view · edit · print · history

NAS200.BootLog History

Hide minor edits - Show changes to markup

August 04, 2007, at 10:58 AM by dyoung --
Changed lines 248-254 from:

$

to:

$ cat /proc/mtd dev: size erasesize name mtd0: 001c0000 00020000 "Kernel" mtd1: 00600000 00020000 "Initrd" mtd2: 00020000 00020000 "Config" mtd3: 00020000 00020000 "Redboot"

August 04, 2007, at 10:52 AM by dyoung --
Added line 1:

[@

Changed lines 248-249 from:

$

to:

$ @]

August 04, 2007, at 10:52 AM by dyoung --
Changed lines 1-247 from:

blahblah

to:

+Ethernet eth0: MAC address 00:18:39:a7:92:f2 IP: 192.168.21.249/255.255.254.0, Gateway: 192.168.20.254 Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROM] Non-certified release, version v2_0 - built 16:52:38, Nov 30 2006

Platform: PC (I386) Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x000f0000, 0x000720b0-0x000a0000 available R3210 00:0012 11-01-2006 <press Ctrl+C to enter prompt mode>

RedBoot> mem_size: 2000000 initrd 1a00000 len 600000 Linux version 2.6.19 (shearer@Shearer-X60) (gcc version 3.3.4) #84 Thu May 10 23:57:03 CST 2007 BIOS-provided physical RAM map:

 BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e801: 0000000000100000 - 0000000002000000 (usable)

0MB HIGHMEM available. 32MB LOWMEM available. Zone PFN ranges:

  DMA             0 ->     4096
  Normal       4096 ->     8192
  HighMem?      8192 ->     8192

early_node_map[1] active PFN ranges

    0:        0 ->     8192

DMI not present or invalid. ACPI: Unable to locate RSDP Allocating PCI resources starting at 10000000 (gap: 02000000:fe000000) Built 1 zonelists. Total pages: 8128 Kernel command line: console=ttyS0,38400 root=/dev/mtdblock1 Initializing CPU#0 PID hash table entries: 128 (order: 7, 512 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 22336k/32768k available (2218k kernel code, 10044k reserved, 905k data, 156k init, 0k highmem) virtual kernel memory layout:

    fixmap  : 0xfffea000 - 0xfffff000   (  84 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xc2800000 - 0xff7fe000   ( 975 MB)
    lowmem  : 0xc0000000 - 0xc2000000   (  32 MB)
      .init : 0xc0410000 - 0xc0437000   ( 156 kB)
      .data : 0xc032a851 - 0xc040cfc8   ( 905 kB)
      .text : 0xc0100000 - 0xc032a851   (2218 kB)

Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 Compat vDSO mapped to ffffe000. CPU: 486 Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 6144k freed NET: Registered protocol family 16 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware NET: Registered protocol family 2 IP route cache hash table entries: 256 (order: -2, 1024 bytes) TCP established hash table entries: 1024 (order: 2, 16384 bytes) TCP bind hash table entries: 512 (order: 1, 10240 bytes) TCP: Hash tables configured (established 1024 bind 512) TCP reno registered audit: initializing netlink socket (disabled) audit(1249617731.930:1): initialized Total HugeTLB? memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 3.0 (2006/03/15) Phillip Lougher NTFS driver 2.1.27 [Flags: R/O]. SGI XFS with large block numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled ?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 8 RAM disks of 8192K size 1024 blocksize r6040: RDC R6040 net driver, version 0.9 (12July2005) r6040: RDC R6040 net driver, version 0.9 (12July2005) r6040: RDC R6040 net driver, version 0.9 (12July2005) PCI: Enabling device 0000:00:04.0 (0005 -> 0007) sata_sil 0000:00:04.0: cache line size not set. Driver may not function sata_sil 0000:00:04.0: Applying R_ERR on DMA activate FIS errata fix ata1: SATA max UDMA/100 cmd 0xC2800080 ctl 0xC280008A bmdma 0xC2800000 irq 9 ata2: SATA max UDMA/100 cmd 0xC28000C0 ctl 0xC28000CA bmdma 0xC2800008 irq 9 scsi0 : sata_sil ata1: SATA link down (SStatus? 0 SControl? 310) scsi1 : sata_sil ata2: SATA link down (SStatus? 0 SControl? 310) physmap flash device: 800000 at ff800000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank

 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A

Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled cmdlinepart partition parsing not available RedBoot partition parsing not available Using physmap partition definition Creating 4 MTD partitions on "phys_mapped_flash": 0x00000000-0x001c0000 : "Kernel" 0x001c0000-0x007c0000 : "Initrd" 0x007c0000-0x007e0000 : "Config" 0x007e0000-0x00800000 : "Redboot" ehci_hcd 0000:00:0a.1: EHCI Host Controller ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0a.1: irq 14, io mem 0xc1000000 ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd 0000:00:0a.0: OHCI Host Controller ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0a.0: irq 15, io mem 0xc1001000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v3.0 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver In i2c_add_driver(), will call i2c_register_driver Call driver_register(). After driver_register(). i2c-velleman.o: i2c Velleman K8000 adapter module version 2.6.1 (20010830) 3530A: I2C? based RTC driver for S-3530A. In i2c_add_driver(), will call i2c_register_driver Call driver_register(). After driver_register(). Call i2c_attach_client(). md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: multipath personality registered for level -4 device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode md: Autodetecting RAID arrays. Time: pit clocksource has been installed. md: autorun ... md: ... autorun DONE. RAMDISK: Couldn't find valid RAM disk image starting at 0. VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 156k freed Creating ramfs for /var/ / Loading Modules: Using /lib/pbuttons.ko pbuttons: module license 'unspecified' taints kernel. register_chrdev Using /lib/nls_cp932.ko Using /lib/nls_cp949.ko Using /lib/nls_cp950.ko Fan is on. Creating ramfs for /tmp: Starting Set CGI_ds.conf: route: SIOC[ADD|DEL]RT: File exists 0 0 0 0 :0 0 0 0 Restore time and timezone: 08/04/2007-03:43:57 Restore usrgrpshares: Starting WEB Server: Starting samba: Starting download: download uses obsolete (PF_INET,SOCK_PACKET) device eth0 entered promiscuous mode audit(1186224266.109:2): dev=eth0 prom=256 old_prom=0 auid=4294967295 Starting INET Server: Starting QuickSet? Daemon : Starting Rest Task : Boot Complete! Checking disk status : full=0

Please press Enter to activate this console.

BusyBox? v1.00-rc2 (2007.05.24-02:02+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands.

$ cat /proc/cpuinfo processor : 0 vendor_id : unknown cpu family : 4 model : 0 model name : 486 stepping : unknown fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : no fpu_exception : no cpuid level : -1 wp : yes flags : bogomips : 49.76

$ $ cat /proc/meminfo MemTotal?: 28636 kB MemFree?: 2004 kB Buffers: 2632 kB Cached: 15304 kB SwapCached?: 0 kB Active: 10796 kB Inactive: 11940 kB HighTotal?: 0 kB HighFree?: 0 kB LowTotal?: 28636 kB LowFree?: 2004 kB SwapTotal?: 0 kB SwapFree?: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages?: 4828 kB Mapped: 2380 kB Slab: 3028 kB SReclaimable?: 1056 kB SUnreclaim?: 1972 kB PageTables?: 380 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit?: 14316 kB Committed_AS: 22760 kB VmallocTotal?: 999416 kB VmallocUsed?: 8576 kB VmallocChunk?: 990448 kB HugePages?_Total: 0 HugePages?_Free: 0 HugePages?_Rsvd: 0 Hugepagesize: 4096 kB $

August 04, 2007, at 10:49 AM by dyoung --
Added line 1:

blahblah

view · edit · print · history · Last edited by dyoung.
Originally by dyoung.
Page last modified on August 06, 2007, at 06:03 AM