+Flag is effd
 2--Flag is 10

 RedBoot(tm) bootstrap and debug environment [ROM]
 Red Hat certified release,version 1.92 - built 21:22:36, Jun 11 2004

 Platform: IXDP425 Development Platform (XScale) 
 Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

 RAM: 0x00000000-0x04000000, 0x0001c798-0x03fd1000 available
 FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
 script is fis load filesystem -b 0x00B00000
 fis load kernel -b 0x00400000
 exec 0x00400000

 == Executing boot script in 5.000 seconds - enter ^C to abort
 RedBoot> fis load filesystem -b 0x00B00000
 RedBoot> fis load kernel -b 0x00400000
 RedBoot> exec 0x00400000
 Using base address 0x00400000 and length 0x00200000
 Uncompressing Linux.....................................................................        done, booting the kernel.
 Linux version 2.4.18_mvl30-ixdp425 (root@localhost.localdomain) (gcc version 3.2.1  20020930 (MontaVista)) #93 ¶g¤­ 8¤ë 20 22:39:50 CST 2004
 CPU: Intel XScale-IXP4xx/IXC1100 revision 1
 Machine: Intel IXDP425 Development Platform
 Security risk: creating user accessible mapping for 0x60000000 at 0xff00f000
 Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
 Security risk: creating user accessible mapping for 0x55000000 at 0xf5000000
 On node 0 totalpages: 16384
 zone(0): 16384 pages.
 zone(1): 0 pages.
 zone(2): 0 pages.
 Kernel command line: console=ttyS0,115200 root=/dev/ram rw initrd=0x00B00000,10M mem=64M@0x00000000
 Calibrating delay loop... 263.78 BogoMIPS
 Memory: 64MB = 64MB total
 Memory: 52016KB available ( 1684K code, 399K data, 200K init)
 XScale Cache/TLB Locking Copyright(c) 2001 MontaVista Software, Inc.
 XScale cache_lock_init called
   Calling consistent alloc
   low_level_page initialized
   low_level_page @ 0xc4800000
      icache_lock_fn @ 0xc4800080
      dcache_lock_fn @ 0xc48000a0
      icache_unlock_fn @ 0xc4800098
      dcache_unlock_fn @ 0xc48000f0
 Initializing TLB locking
 TLB locking initialized 
 Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
 Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
 Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
 Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
 POSIX conformance testing by UNIFIX
 PCI Autoconfig: Found Bus 0, Device 1, Function 0
 PCI Autoconfig: BAR 0, I/O, size=0x8, address=0xfffffff8
 PCI Autoconfig: BAR 1, I/O, size=0x4, address=0xfffffff4
 PCI Autoconfig: BAR 2, I/O, size=0x8, address=0xffffffe8
 PCI Autoconfig: BAR 3, I/O, size=0x4, address=0xffffffe4
 PCI Autoconfig: BAR 4, I/O, size=0x10, address=0xffffffd0
 PCI Autoconfig: Found Bus 0, Device 2, Function 0
 PCI Autoconfig: BAR 0, Mem, size=0x10000, address=0x4bff0000
 PCI Autoconfig: Found Bus 0, Device 3, Function 0
 PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffffa0
 PCI Autoconfig: Found Bus 0, Device 3, Function 1
 PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffff80
 PCI Autoconfig: Found Bus 0, Device 3, Function 2
 PCI Autoconfig: BAR 0, Mem, size=0x100, address=0x4bfeff00
 PCI: bus0: Fast back to back transfers disabled
 Linux NET4.0 for Linux 2.4
 Based upon Swansea University Computer Society NET3.039
 Initializing RT netlink socket
 Starting kswapd
 Disabling the Out Of Memory Killer
 Journalled Block Device driver loaded
 NTFS driver v1.1.22 [Flags: R/W]
 i2c-core.o: i2c core module version 2.6.2 (20011118)
 i2c-dev.o: i2c /dev entries driver module version 2.6.2 (20011118)
 i2c-algo-bit.o: i2c bit algorithm module version 2.6.2 (20011118)
 i2c-proc.o version 2.6.2 (20011118)
 pty: 256 Unix98 ptys configured
 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
 ttyS00 at 0xff000003 (irq = 15) is a XScale UART
 ttyS01 at 0xff001003 (irq = 13) is a XScale UART
 Loaded PCF8594C2 I2C EEPROM NVRAM driver
 block: 128 slots per queue, batch=32
 RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
 Uniform Multi-Platform E-IDE driver Revision: 6.31
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 AEC6280: IDE controller on PCI bus 00 dev 08
 AEC6280: chipset revision 6
 AEC6280: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffffffd0-0xffffffd7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xffffffd8-0xffffffdf, BIOS settings: hdc:pio, hdd:pio
 hda: HDS722516VLAT80, ATA DISK drive
 ide0 at 0xfffffff8-0xffffffff,0xfffffff6 on irq 28
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 hda: 321672960 sectors (164697 MB) w/7938KiB Cache, CHS=20023/255/63, UDMA(66)
 Partition check:
  hda: hda1 
 loop: loaded (max 8 devices)
 SCSI subsystem driver Revision: 1.00
 request_module[scsi_hostadapter]: Root fs not mounted
 Creating 8 MTD partitions on "IXP425 Flash":
 0x00000000-0x00040000 : "RedBoot"
 0x00040000-0x00240000 : "kernel"
 0x00240000-0x00840000 : "filesystem"
 0x00840000-0x00ec0000 : "usr"
 0x00ec0000-0x00f00000 : "unallocated space"
 0x00f00000-0x00fc0000 : "sysconfig"
 0x00fc0000-0x00fc1000 : "RedBoot config"
 0x00fe0000-0x01000000 : "FIS directory"
 usb.c: registered new driver usbdevfs
 usb.c: registered new driver hub
 ehci_hcd 00:03.2: PCI device 1106:3104 (VIA Technologies, Inc.)
 ehci_hcd 00:03.2: irq 24, pci mem c5814f00
 usb.c: new USB bus registered, assigned bus number 1
 PCI: 00:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
 ehci_hcd 00:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
 Manufacturer: 
 Product: 
 SerialNumber: 
 hub.c: USB hub found
 hub.c: 4 ports detected
 host/usb-uhci.c: $Revision: 1.275 $ time 22:41:13 Aug 20 2004
 host/usb-uhci.c: High bandwidth mode enabled
 host/usb-uhci.c: USB UHCI at I/O 0xffffffa0, IRQ 26
 host/usb-uhci.c: Detected 2 ports
 usb.c: new USB bus registered, assigned bus number 2
 Product: USB UHCI Root Hub
 SerialNumber: ffffffa0
 hub.c: USB hub found
 hub.c: 2 ports detected
 host/usb-uhci.c: USB UHCI at I/O 0xffffff80, IRQ 25
 host/usb-uhci.c: Detected 2 ports
 usb.c: new USB bus registered, assigned bus number 3
 hub.c: port 1 over-current change
 Product: USB UHCI Root Hub
 SerialNumber: ffffff80
 hub.c: USB hub found
 hub.c: 2 ports detected
 hub.c: port 2 over-current change
 host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
 usb.c: registered new driver usblp
 printer.c: v0.13: USB Printer Device Class driver
 Initializing USB Mass Storage driver...
 usb.c: registered new driver usb-storage
 USB Mass Storage support registered.
 ixp425_i2c_init
 i2c-algo-bit.o: hw routines for IXP425 I2C Adapter registered.
 NET4: Linux TCP/IP 1.0 for NET4.0
 IP Protocols: ICMP, UDP, TCP
 IP: routing cache hash table of 512 buckets, 4Kbytes
 TCP: Hash tables configured (established 4096 bind 8192)
 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 NET4: Ethernet Bridge 008 for NET4.0
 NET4: Linux IPX 0.47 for NET4.0
 IPX Portions Copyright (c) 1995 Caldera, Inc.
 IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
 NET4: AppleTalk 0.18a for Linux NET4.0
 NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
 RAMDISK: Compressed image found at block 0
 Freeing initrd memory: 10240K
 VFS: Mounted root (ext2 filesystem).
 Freeing init memory: 200K
 serial console detected.  Disabling virtual terminals.
 init started:  BusyBox v0.60.3 (2002.12.19-12:19+0000) multi-call binary
 kjournald starting.  Commit interval 5 seconds
 EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
 EXT3-fs: recovery complete.
 EXT3-fs: mounted filesystem with ordered data mode.
 Using ixp425.o
 READ npe0_mac = 00-03-2f-27-28-12
 Reading RTC Value and Put into System DateS 
  i2c_outb:A2[1] [0] [1] [0] [0] [0] [1] [0]  A
  i2c_outb:00[0] [0] [0] [0] [0] [0] [0] [0]  A
  cfg.device.key_0=
 cfg.device.key_1=
 cfg.device.key_2=
 cfg.device.S key_3=
  i2c_outb:A3[1] [0] [1] [0] [0] [0] [1] [1]  A
  <7>i2c-core.o: master_recv: reading 15 bytes on IXP425 I2C Adapter.
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][1][1][0][0][0][0] 30
 Am
 i2c_inb:[0][0][0][1][0][1][0][0] 14
 Am
 i2c_inb:[0][0][1][0][0][0][1][0] 22
 Am
 i2c_inb:[0][0][0][1][0][0][0][0] 10
 Am
 i2c_inb:[0][0][1][1][0][0][1][0] 32
 Am
 i2c_inb:[1][0][1][1][0][0][0][0] b0
 Am
 i2c_inb:[0][0][0][0][0][1][0][1] 05
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][1][1][0][0][0][0] 30
 Am
 i2c_inb:[0][0][1][1][0][0][0][0] 30
 NAm
 i2c-algo-bit.o: read 15 bytes.
 P
 S  i2c_outb:A2[1] [0] [1] [0] [0] [0] [1] [0]  A
  i2c_outb:00[0] [0] [0] [0] [0] [0] [0] [0]  A
 S  i2c_outb:A3[1] [0] [1] [0] [0] [0] [1] [1]  A
 dhcp_check
 <7>i2c-core.o: master_recv: reading 15 bytes on IXP425 I2C Adapter.
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][1][1][0][0][0][0] 30
 Am
 i2c_inb:[0][0][0][1][0][1][0][0] 14
 Am
 i2c_inb:[0][0][1][0][0][0][1][0] 22
 Am
 i2c_inb:[0][0][0][1][0][0][0][0] 10
 Am
 i2c_inb:[0][0][1][1][0][0][1][0] 32
 Am
 i2c_inb:[1][0][1][1][0][0][0][0] b0
 Am
 i2c_inb:[0][0][0][0][0][1][0][1] 05
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][1][1][0][0][0][0] 30
 Am
 i2c_inb:[0][0][1][1][0][0][0][0] 30
 NAm
 i2c-algo-bit.o: read 15 bytes.
 P
 S  i2c_outb:A2[1] [0] [1] [0] [0] [0] [1] [0]  A
  i2c_outb:00[0] [0] [0] [0] [0] [0] [0] [0]  A
 S  i2c_outb:A3[1] [0] [1] [0] [0] [0] [1] [1]  A
 <7>i2c-core.o: master_recv: reading 15 bytes on IXP425 I2C Adapter.
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][1][1][0][0][0][0] 30
 Am
 i2c_inb:[0][0][0][1][0][1][0][0] 14
 Am
 i2c_inb:[0][0][1][0][0][0][1][0] 22
 Am
 i2c_inb:[0][0][0][1][0][0][0][0] 10
 Am
 i2c_inb:[0][0][1][1][0][0][1][0] 32
 Am
 i2c_inb:[1][0][1][1][0][0][0][0] b0
 Am
 i2c_inb:[0][0][0][0][0][1][0][1] 05
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][0][0][0][0][0][0] 00
 Am
 i2c_inb:[0][0][1][1][0][0][0][0] 30
 Am
 i2c_inb:[0][0][1][1][0][0][0][0] 30
 NAm
 i2c-algo-bit.o: read 15 bytes.
 P
 Mon Oct 10 22:14:00 UTC 2005
 ken: start tftpd
 rm: cannot remove `/tmp/log_xor': No such file or directory
 rm: cannot remove `/tmp/smtp_xor': No such file or directory
 hdd status and disk full log program start...
 using setting file: /e_storage/bin/log.set
 chmod 777 /tmp/e-storage.bin
 ken: part 1
 ken: part 2
 ken: part 3
 ken: part 4
 ken: part 5
 Starting system log daemon: syslogd klogd.
 00032f272812
 [  *** Starting CSR Modules *** ]
 Using /lib/modules/2.4.18_mvl30-ixdp425/kernel/drivers/ixp400/ixp400.o
 Module init.
 Using /lib/modules/2.4.18_mvl30-ixdp425/kernel/drivers/net/ixp425_eth.o
 ixp425_eth: 
 Initializing IXP425 NPE Ethernet driver software v. 1.1 
 ixp425_eth: CPU clock speed (approx) = 0 MHz
 [error] ixEthMiiPhyScan : unexpected Mii PHY ID 00221619
 dhcp_check
 ixp425_eth: ixp0 is using the PHY at address 0
 ixp425_eth: ixp1 is using the PHY at address 1
 READ npe0_mac = 00-03-2f-27-28-12
 [  *** Starting Wireless Driver *** ]
 Using /lib/wireless/wlan.o
 ixp425_eth: ixEthMiiLinkStatus failed on PHY1.
	Can't determine
 the auto negotiated parameters. Using default values.
 wlan: 0.7.3.1 BETA
 Using /lib/wireless/ath_hal.o
 ath_hal: 0.9.8.6
 Using /lib/wireless/ath_pci.o
 ath_pci: 0.8.5.4 BETA
 ath_pci: cache line size not set; forcing 8
 dhcp_check
 ath0: mac 5.9 phy 4.3 5ghz radio 4.6
 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: 802.11 address: 00:03:2f:27:44:e7
 ath0: Atheros 5212: mem=0x4bff0000, irq=27
 usb init
 $** can't synthesize root hub events
 GLOBALSUNTECH E_SERVER 1.0Completed Getting Config...
 [  *** Starting Bridging *** ]
 device ath0 entered promiscuous mode
 device ixp0 entered promiscuous mode
 dhcp_check
 ixp425_eth: ixp0: Entering promiscuous mode
 select G Mode
 <mapping sub-ioctl mode to cmd 0x8BE0-2>
 channel=1
 tmp=iwconfig ath0 channel 1
 ath0      IEEE 802.11g  ESSID:"IOMEGA_NAS"  
          Mode:Master  Frequency:2.412GHz  Access Point: 00:03:2F:27:44:E7  
          Bit Rate:0kb/s   Tx-Power:off   Sensitivity=0/3  
          Retry:off   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0/94  Signal level:-95 dBm  Noise level:-95 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

 ath0      IEEE 802.11g  ESSID:"IOMEGA_NAS"  
          Mode:Master  Frequency:2.412GHz  Access Point: 00:03:2F:27:44:E7  
          Bit Rate:0kb/s   Tx-Power:off   Sensitivity=0/3  
          Retry:off   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0/94  Signal level:-95 dBm  Noise level:-95 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

 WEP Disable
 br0: port 2(ixp0) entering listening state
 br0: port 1(ath0) entering listening state
 br0: port 2(ixp0) entering learning state
 br0: port 1(ath0) entering learning state
 dhcp_check
 br0: port 2(ixp0) entering forwarding state
 br0: topology change detected, propagating
 br0: port 1(ath0) entering forwarding state
 br0: topology change detected, propagating
 dhcp_check
 dhcp_check 
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 dhcp_check
 Already Has Smb.conf
 Already Have Share
 Starting Samba daemons: nmbd smbd.
 Starting portmap daemon: portmap.
 dhcp_check
 Completed Getting IP...
 Completed Getting IP...ixp425.o: opened.

 HTTP Server Starting ...
 Already Has exports.nfs
 Already Has exports.nfs
 Exporting directories for NFS kernel daemon...smtp_txt 1 1 1 c0a80cd2
 0 1 1 1




 done.
 Starting nfsd:  done.
 program 100003 version 3 ready and waiting
 Starting rpc.mountd:  done.
 UPNP: No such file or directory