NSLU2-Linux
view · edit · print · history

FSG3.GPIOConnections History

Hide minor edits - Show changes to markup

January 02, 2008, at 09:41 AM by rwhitby --
Changed line 11 from:
GPIO[4]AB26Sync Button (1 = Pushed) Input
to:
GPIO[4]AB26Sync Button (0 = Pushed) Input
Changed lines 16-17 from:
GPIO[9]V22Reset Button (1 = Pushed) Input
GPIO[10]Y26Unplug Button (1 = Pushed) Input
to:
GPIO[9]V22Reset Button (0 = Pushed) Input
GPIO[10]Y26Unplug Button (0 = Pushed) Input
Restore
October 01, 2007, at 09:18 PM by fcarolo -- formatting
Changed lines 3-4 from:

Note that the LEDs? are controlled by some external controller - they are not directly connected to GPIOs?.

to:

Note that the LEDs are controlled by some external controller - they are not directly connected to GPIOs.

Restore
September 28, 2007, at 12:32 AM by rwhitby -- leds are not connected directly to GPIOs.
Added lines 3-4:

Note that the LEDs? are controlled by some external controller - they are not directly connected to GPIOs?.

Restore
June 19, 2007, at 05:27 AM by rwhitby --
Added lines 1-20:

The IXP422 CPU has 16 General Purpose Input/Output (GPIO) pins which are used to interface to external hardware. In the case of the FSG3, the GPIO pins are used to monitor the buttons, control the LEDs, connect to the RTC, IDE controller and USB 2.0 controller.

GPIOIXP BallFunctionConnected to:Configured as:
GPIO[0]Y22  Input
GPIO[1]W21  Input
GPIO[2]AC26  Input
GPIO[3]AA24  Input
GPIO[4]AB26Sync Button (1 = Pushed) Input
GPIO[5]Y25PCI INTC (IRQ 22) Input
GPIO[6]V21PCI INTA (IRQ 23) Input
GPIO[7]AA26PCI INTB (IRQ 24) Input
GPIO[8]W23
GPIO[9]V22Reset Button (1 = Pushed) Input
GPIO[10]Y26Unplug Button (1 = Pushed) Input
GPIO[11]W25
GPIO[12]W26I²C SDARTC - SDAInput/Tristate
GPIO[13]V24I²C SCLRTC - SCLOutput
GPIO[14]U22  Input
GPIO[15]U25  Output
Restore
view · edit · print · history · Last edited by rwhitby.
Based on work by fcarolo and rwhitby.
Originally by rwhitby.
Page last modified on January 02, 2008, at 09:41 AM