+
 Network NOT initialized!
  Press FSG Emergency Button during power up to initialize network

 RedBoot(tm) bootstrap and debug environment [ROM]
 Red Hat certified release, version 1.94 - built 11:47:48, Jun 10 2005

 Platform: Freecom Storage  Gateway (FSG) (XScale?) BE
 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

 RAM: 0x00000000-0x04000000, 0x0001db58-0x03fd1000 available
 FLASH: 0x50000000 - 0x50400000, 32 blocks of 0x00020000 bytes each.
 == Executing boot script in 1.000 seconds - enter ^C to abort
 RedBoot> fis load kern1
 RedBoot> exec -c "console=ttyS0,115200 root=/dev/hda2 mem=64M@0x00000000"
 Using base address 0x00700000 and length 0x00180000
 Uncompressing Linux........................................................................................... done, booting the kernel.
 Linux version 2.4.27-uc1 (root@lindev) (gcc version 3.3.2) #1767 Mo Jan 29 09:46:42 CET 2007
 CPU: XScale?-IXP4xx?/IXC11xx? revision 1
 Machine: Intel IXP425 Freecom Platform
 alloc_bootmem_low
 memtable_init
 On node 0 totalpages: 16384
 zone(0): 16384 pages.
 zone(1): 0 pages.
 zone(2): 0 pages.
 Kernel command line: console=ttyS0,115200 root=/dev/hda2 mem=64M@0x00000000
 Calibrating delay loop... 266.24 BogoMIPS?
 Memory: 64MB = 64MB total
 Memory: 61820KB available (2397K code, 512K data, 64K init)
 Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
 Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
 Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
 Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
 POSIX conformance testing by UNIFIX
 PCI Autoconfig: Found Bus 0, Device 12, Function 0
 PCI Autoconfig: BAR 0, I/O, size=0x10, address=0xfffffff0
 PCI Autoconfig: BAR 1, I/O, size=0x10, address=0xffffffe0
 PCI Autoconfig: BAR 2, I/O, size=0x10, address=0xffffffd0
 PCI Autoconfig: BAR 3, I/O, size=0x10, address=0xffffffc0
 PCI Autoconfig: BAR 4, I/O, size=0x20, address=0xffffffa0
 PCI Autoconfig: BAR 5, I/O, size=0x100, address=0xfffffe00
 PCI Autoconfig: Found Bus 0, Device 13, Function 0
 PCI Autoconfig: BAR 0, Mem, size=0x10000, address=0x4bff0000
 PCI Autoconfig: BAR 1, Mem, size=0x10000, address=0x4bfe0000
 PCI Autoconfig: Found Bus 0, Device 14, Function 0
 PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x4bfdf000
 PCI Autoconfig: Found Bus 0, Device 14, Function 1
 PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x4bfde000
 PCI Autoconfig: Found Bus 0, Device 14, Function 2
 PCI Autoconfig: BAR 0, Mem, size=0x100, address=0x4bfddf00
 PCI: bus0: Fast back to back transfers disabled
 Linux NET4?.0 for Linux 2.4
 Based upon Swansea University Computer Society NET3?.039
 Initializing RT netlink socket
 Starting kswapd
 kinoded started
 VFS: Disk quotas vdquot_6.5.1
 Journalled Block Device driver loaded
 NTFS driver 2.1.6b [Flags: R/O].
 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
 pty: 256 Unix98 ptys configured
 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
 ttyS00 at 0xff000003 (irq = 15) is a XScale? UART
 ttyS01 at 0xff001003 (irq = 13) is a XScale? UART
 ledman: Copyright (C) SnapGear?, 2000-2003.
 LEDMAN: registered RESET switch on IRQ26?
 LEDMAN: registered UNPLUG switch on IRQ27?
 LEDMAN: registered SYNC switch on IRQ21?
 loop: loaded (max 8 devices)
 PPP generic driver version 2.4.2
 PPP Deflate Compression module registered
 PPP BSD Compression module registered
 MPPE/MPPC encryption/compression module registered
 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 VIA_6421: IDE controller at PCI slot 00:0c.0
 VIA_6421: chipset revision 80
 VIA_6421: 100% native mode on irq 22
     ide0: BM-DMA at 0xffb0-0xffb7, BIOS settings: hda:pio, hdb:pio
 SATA stat after reset 0
     ide1: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdc:pio, hdd:pio
 SATA stat after reset 0
     ide2: BM-DMA at 0xffa8-0xffaf, BIOS settings: hde:pio, hdf:pio
 hda: HDT722516DLAT80?, ATA DISK drive
 blk: queue c02e7318, no I/O memory limit
 ide0 at 0xffd0-0xffd7,0xffda on irq 22
 hda: attached ide-disk driver.
 hda: host protected area => 1
 hda: 321672960 sectors (164697 MB) w/7674KiB Cache, CHS=20023/255/63, UDMA(33)
 Partition check:
  hda: hda1 hda2 hda3 hda4
 SCSI subsystem driver Revision: 1.00
 scsi0 : SCSI host adapter emulation for IDE ATAPI devices
 cfi_cmdset_0001: Erase suspend on write enabled
 Using buffer write method
 Creating 5 MTD partitions on "IXP425 Flash":
 0x00000000-0x00040000 : "RedBoot"
 0x00080000-0x00200000 : "kern1"
 0x00200000-0x00380000 : "kern2"
 0x003c0000-0x003e0000 : "RedBoot config"
 0x003e0000-0x00400000 : "FIS directory"
 CFI: Found no IXP425 Flash device at location zero
 i2c-core.o: i2c core module version 2.9.0 (20041228)
 i2c-dev.o: i2c /dev entries driver module version 2.9.0 (20041228)
 IXP425 Montejade I2C? support available
 i2c-proc.o version 2.9.0 (20041228)
 usb.c: registered new driver usbdevfs
 usb.c: registered new driver hub
 ehci_hcd 00:0e.2: NEC Corporation USB 2.0
 ehci_hcd 00:0e.2: irq 23, pci mem 4bfddf00
 usb.c: new USB bus registered, assigned bus number 1
 ehci_hcd 00:0e.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
 hub.c: USB hub found
 hub.c: 5 ports detected
 host/usb-uhci.c: $Revision: 1.275 $ time 09:47:02 Jan 29 2007
 host/usb-uhci.c: High bandwidth mode enabled
 host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
 host/usb-ohci.c: USB OHCI at membase 0x4bfdf000, IRQ 23
 host/usb-ohci.c: usb-00:0e.0, NEC Corporation USB
 usb.c: new USB bus registered, assigned bus number 2
 hub.c: USB hub found
 hub.c: 3 ports detected
 host/usb-ohci.c: USB OHCI at membase 0x4bfde000, IRQ 23
 host/usb-ohci.c: usb-00:0e.1, NEC Corporation USB (#2)
 usb.c: new USB bus registered, assigned bus number 3
 hub.c: USB hub found
 hub.c: 2 ports detected
 usb.c: registered new driver usblp
 printer.c: v0.13: USB Printer Device Class driver
 Initializing USB Mass Storage driver...
 usb.c: registered new driver usb-storage
 USB Mass Storage support registered.
 Initializing Cryptographic API
 isl1208.o: version 2.9.2-Freecom (20051016) with RTC device support
 eeprom.o version 2.9.0 (20041228)
 w83781d.o version 2.9.2-Freecom (20051016)
 i2c-algo-bit.o: IXP425 I2C? Adapter sendbytes: error - bailout.
 w83781d.o:  PWM-Divisor 60; must be 0-4
 NET4?: Linux TCP/IP 1.0 for NET4?.0
 IP Protocols: ICMP, UDP, TCP, IGMP
 IP: routing cache hash table of 512 buckets, 4Kbytes
 TCP: Hash tables configured (established 4096 bind 8192)
 GRE over IPv4? tunneling driver
 Linux IP multicast router 0.06 plus PIM-SM
 ip_conntrack version 2.1 (512 buckets, 4096 max) - 316 bytes per conntrack
 ip_tables: (C) 2000-2002 Netfilter core team
 NET4?: Unix domain sockets 1.0/SMP for Linux NET4?.0.
 NET4?: Ethernet Bridge 008 for NET4?.0
 Bridge firewalling registered
 NetWinder? Floating Point Emulator V0.97 (double precision)
 FAT: bogus logical sector size 0
 reiserfs: found format "3.6" with standard journal
 reiserfs: using ordered data mode
 reiserfs: checking transaction log (device ide0(3,2)) ...
 for (ide0(3,2))
 reiserfs: replayed 4 transactions in 0 seconds
 ide0(3,2):Using r5 hash to sort names
 VFS: Mounted root (reiserfs filesystem).
 Freeing init memory: 64K
 Using /lib/modules/2.4.27-uc1/kernel/ixp425/ixp400/ixp400.o
 Module init.Using /lib/modules/2.4.27-uc1/kernel/ixp425/net/ixp425_eth.o
 <6>ixp425_eth:
 Initializing IXP425 NPE Ethernet driver software v. 1.1+
 ixp425_eth: CPU clock speed (approx) = 0 MHz?
 ixp425_eth: ixp0 is using the PHY at address 5
 ixp425_eth: eth1 is using the PHY at address 4
 Root device is /dev/hda2
 Setting up swapspace version 1, size = 74022912 bytes
 Adding Swap: 72284k swap-space (priority -1)
 reiserfs: found format "3.6" with standard journal
 reiserfs: using ordered data mode
 reiserfs: checking transaction log (device ide0(3,4)) ...
 for (ide0(3,4))
 reiserfs: replayed 4 transactions in 0 seconds
 ide0(3,4):Using r5 hash to sort names
 quotaon: Cannot find quota file on /home [/dev/hda4] to turn quotas on/off.
 quotaon: Cannot find quota file on /home [/dev/hdc4] to turn quotas on/off.
 quotaon: using /home/aquota.user on /dev/hdc4 [/home]: No such device
 Starting syslogd/klogd.
 Starting network.
 Starting WLAN access point.
 wlan: 0.8.6.0 (EXPERIMENTAL)
 wlan: mac acl policy registered
 Loaded mwl driver, version 3.36.2.3
 Build date: Jan 15 2007
 Debugging version (IEEE80211?)
 mwl0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 mwl0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 mwl0: H/W encryption support: WEP AES_CCM TKIP
 mwl0: Marvell Libertas MB/CB35P? Wireless LAN adapter: mem=0x4bff0000, irq=24
 <mapping sub-ioctl maccmd to cmd 0x8BE0-17>
 device mwl0 entered promiscuous mode
 Configuration file: /etc/hostapd.conf
 Using interface mwl0 with hwaddr 00:01:db:00:55:b4 and ssid 'fsg'
 Flushing old station entries
 Deauthenticate all stations
 l2_packet_receive - recv: Network is down
 l2_packet_receive - recv: Network is down
 device ixp0 entered promiscuous mode
 ixp0: attempt to add interface with same source address.
 ixp425_eth: ixp0: Entering promiscuous mode
 eth0: port 2(ixp0) entering learning state
 eth0: port 1(mwl0) entering learning state
 eth0: port 2(ixp0) entering forwarding state
 eth0: topology change detected, propagating
 eth0: port 1(mwl0) entering forwarding state
 eth0: topology change detected, propagating
 Starting network routing.
 Using 192.168.18.0/24 on LAN ports.
 Warning: WAN port IP not set.
 Starting DHCP client on eth1.
 Starting DHCP server and DNS service.
 Starting samba.
 Starting HTTP server with options: -D SSL
 mwl0: creating bss 00:01:db:00:55:b4
 Starting SSH server.
 Starting information server.
 Starting Fan deamon.
 Starting flush daemon -> spin down after 30 min.
 Starting cron.
 Starting Optware.
 / #