NSLU2-Linux
view · edit · print · history
 +
 Network NOT initialized!
  Press FSG Emergency Button during power up to initialize network

 RedBoot(tm) bootstrap and debug environment [ROM]
 Red Hat certified release, version 1.94 - built 11:47:48, Jun 10 2005

 Platform: Freecom Storage  Gateway (FSG) (XScale?) BE
 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

 RAM: 0x00000000-0x04000000, 0x0001db58-0x03fd1000 available
 FLASH: 0x50000000 - 0x50400000, 32 blocks of 0x00020000 bytes each.
 == Executing boot script in 1.000 seconds - enter ^C to abort
 RedBoot> fis load kern1
 RedBoot> exec -c "console=ttyS0,115200 root=/dev/hda2 mem=64M@0x00000000"
 Using base address 0x00700000 and length 0x00180000
 Uncompressing Linux................................................................................................. done, booting the kernel.
 Linux version 2.6.18 (root@Heimat) (gcc version 3.4.4 (release) (CodeSourcery? ARM 2005q3-2)) #144 Wed May 16 11:26:01 CEST 2007
 CPU: XScale?-IXP42x? Family [690541f1] revision 1 (ARMv5TE?), cr=000039ff
 Machine: FSG3 - Freecom Storage Gateway
 Memory policy: ECC disabled, Data cache writeback
 CPU0?: D VIVT undefined 5 cache
 CPU0?: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
 CPU0?: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
 Built 1 zonelists.  Total pages: 16384
 Kernel command line: console=ttyS0,115200 root=/dev/sda2 mem=64M@0x00000000
 PID hash table entries: 512 (order: 9, 2048 bytes)
 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 Memory: 64MB = 64MB total
 Memory: 61824KB available (2761K code, 220K data, 84K init)
 Mount-cache hash table entries: 512
 CPU: Testing write buffer coherency: ok
 NET: Registered protocol family 16
 IXP4xx?: Using 16MiB expansion bus window size
 PCI: IXP4xx? is host
 PCI: IXP4xx? Using direct access for memory space
 PCI: bus0: Fast back to back transfers disabled
 dmabounce: registered device 0000:00:0c.0 on pci bus
 dmabounce: registered device 0000:00:0d.0 on pci bus
 dmabounce: registered device 0000:00:0e.0 on pci bus
 dmabounce: registered device 0000:00:0e.1 on pci bus
 dmabounce: registered device 0000:00:0e.2 on pci bus
 fsg3_map_irq: Mapped slot 1 pin 1 to IRQ 22
 fsg3_map_irq: Mapped slot 2 pin 1 to IRQ 24
 fsg3_map_irq: Mapped slot 3 pin 1 to IRQ 23
 fsg3_map_irq: Mapped slot 3 pin 2 to IRQ 23
 fsg3_map_irq: Mapped slot 3 pin 3 to IRQ 23
 SCSI subsystem initialized
 usbcore: registered new driver usbfs
 usbcore: registered new driver hub
 NET: Registered protocol family 2
 IP route cache hash table entries: 512 (order: -1, 2048 bytes)
 TCP established hash table entries: 2048 (order: 1, 8192 bytes)
 TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 TCP: Hash tables configured (established 2048 bind 1024)
 TCP reno registered
 NetWinder? Floating Point Emulator V0.97 (double precision)
 VFS: Disk quotas dquot_6.5.1
 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
 NTFS driver 2.1.27 [Flags: R/O].
 JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
 Initializing Cryptographic API
 io scheduler noop registered
 io scheduler cfq registered (default)
 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
 serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale?
 serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale?
 PPP generic driver version 2.4.2
 PPP Deflate Compression module registered
 PPP BSD Compression module registered
 PPP MPPE Compression module registered
 NET: Registered protocol family 24
 PCI: enabling device 0000:00:0c.0 (0000 -> 0001)
 sata_via 0000:00:0c.0: routed to hard irq line 6
 ata1: PATA max UDMA/133 cmd 0x1420 ctl 0x142A bmdma 0x1400 irq 22
 ata2: PATA max UDMA/133 cmd 0x1440 ctl 0x144A bmdma 0x1410 irq 22
 ata3: PATA max UDMA/133 cmd 0x1430 ctl 0x143A bmdma 0x1408 irq 22
 scsi0 : sata_via
 ATA: abnormal status 0x7F on port 0x1427
 scsi1 : sata_via
 ata2.00: ATA-7, max UDMA/133, 321672960 sectors: LBA48? 
 ata2.00: ata2: dev 0 multi count 0
 ata2.00: configured for UDMA/133
 scsi2 : sata_via
 ATA: abnormal status 0x7F on port 0x1437
   Vendor: ATA       Model: HDT722516DLAT80?   Rev: V43O?
   Type:   Direct-Access                      ANSI SCSI revision: 05
 SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
 sda: Write Protect is off
 SCSI device sda: drive cache: write back
 SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
 sda: Write Protect is off
 SCSI device sda: drive cache: write back
  sda: sda1 sda2 sda3 sda4
 sd 1:0:0:0: Attached scsi disk sda
 IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
  Intel/Sharp Extended Query Table at 0x0031
 Using buffer write method
 cfi_cmdset_0001: Erase suspend on write enabled
 Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x3e0000
 RedBoot directory 0x503e0000(0x20000) native
 5 RedBoot partitions found on MTD device IXP4XX-Flash.0
 Creating 5 MTD partitions on "IXP4XX-Flash.0":
 0x00000000-0x00040000 : "RedBoot"
 0x00080000-0x00200000 : "kern1"
 0x00200000-0x00380000 : "kern2"
 0x003c0000-0x003e0000 : "RedBoot config"
 FSG3-MAC for eth0: 00:01:db:00:55:b4
 FSG3-MAC for eth1: 00:01:db:00:55:b5
 0x003e0000-0x00400000 : "FIS directory"
 PCI: enabling device 0000:00:0e.2 (0140 -> 0142)
 ehci_hcd 0000:00:0e.2: EHCI Host Controller
 ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
 ehci_hcd 0000:00:0e.2: irq 23, io mem 0x48022000
 ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
 usb usb1: configuration #1 chosen from 1 choice
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 5 ports detected
 PCI: enabling device 0000:00:0e.0 (0140 -> 0142)
 ohci_hcd 0000:00:0e.0: OHCI Host Controller
 ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
 ohci_hcd 0000:00:0e.0: irq 23, io mem 0x48020000
 usb usb2: configuration #1 chosen from 1 choice
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 3 ports detected
 PCI: enabling device 0000:00:0e.1 (0140 -> 0142)
 ohci_hcd 0000:00:0e.1: OHCI Host Controller
 ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3
 ohci_hcd 0000:00:0e.1: irq 23, io mem 0x48021000
 usb usb3: configuration #1 chosen from 1 choice
 hub 3-0:1.0: USB hub found
 hub 3-0:1.0: 2 ports detected
 USB Universal Host Controller Interface driver v3.0
 usbcore: registered new driver usblp
 drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
 Initializing USB Mass Storage driver...
 usbcore: registered new driver usb-storage
 USB Mass Storage support registered.
 i2c /dev entries driver
 isl1208 0-006f: chip found, driver version 0.2
 isl1208 0-006f: rtc intf: dev (254:0)
 isl1208 0-006f: rtc core: registered isl1208 as rtc0
 hwmon-vid: Unknown VRM version of your CPU
 LEDs?: registered SYNC switch on IRQ21?
 LEDs?: registered RESET switch on IRQ26?
 LEDs?: registered UNPLUG switch on IRQ27?
 Registered led device: sync
 Registered led device: ring
 Registered led device: USB
 Registered led device: SATA
 Registered led device: WAN
 Registered led device: WLAN
 TCP bic registered
 NET: Registered protocol family 1
 NET: Registered protocol family 17
 Bridge firewalling registered
 isl1208 0-006f: hctosys: invalid date/time
 ReiserFS?: sda2: found reiserfs format "3.6" with standard journal
 ReiserFS?: sda2: using ordered data mode
 ReiserFS?: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
 ReiserFS?: sda2: checking transaction log (sda2)
 ReiserFS?: sda2: replayed 6 transactions in 0 seconds
 ReiserFS?: sda2: Using r5 hash to sort names
 VFS: Mounted root (reiserfs filesystem).
 Freeing init memory: 84K
 BUG: warning at arch/arm/mm/consistent.c:363/dma_free_coherent()
 ixp400: module license 'unspecified' taints kernel.
 ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.5.1a 
 ixp400_eth: CPU clock speed (approx) = 266 MHz?
 ixp400_eth: ethernet 0 using NPEB and the PHY at address 5
 ixp400_eth: ethernet 1 using NPEC and the PHY at address 4
 ixp400_eth: Use MAC address 00:01:db:00:55:b4 for port 0
 ixp400_eth: Use MAC address 00:01:db:00:55:b5 for port 1
 ip_tables: (C) 2000-2006 Netfilter Core Team
 ip_conntrack version 2.4 (512 buckets, 4096 max) - 204 bytes per conntrack
 Setting up swapspace version 1, size = 74022912 bytes
 Adding 72284k swap on /dev/sda3.  Priority:-1 extents:1 across:72284k
 fuse init (API version 7.8)
 fuse distribution version: 2.6.1
 kobject_add failed for fs with -EEXIST, don't try to register things with the same name in the same directory.
 insmod: cannot insert `/root/fuse.ko': File exists (-1): File exists
 ReiserFS?: sda4: found reiserfs format "3.6" with standard journal
 ReiserFS?: sda4: using ordered data mode
 ReiserFS?: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
 ReiserFS?: sda4: checking transaction log (sda4)
 ReiserFS?: sda4: Using r5 hash to sort names
 quotaon: Cannot find quota file on /home [/dev/sda4] to turn quotas on/off.
 Starting network.
 device lan0 entered promiscuous mode
 eth0: port 1(lan0) entering learning state
 eth0: topology change detected, propagating
 eth0: port 1(lan0) entering forwarding state
 Starting network routing.
 Using 192.168.1.0/24 on LAN ports.
 Warning: WAN port IP not set.
 Starting DHCP client on eth1.
 Starting DHCP server and DNS service.
 Starting samba.
 Starting HTTP server with options: 
 httpd[431]: [notice] Apache/1.3.33 (Unix) mod_ssl/2.8.22 OpenSSL?/0.9.7c PHP/4.4.1 configured -- resuming normal operations
 httpd[431]: [notice] Accept mutex: sysvsem (Default: sysvsem)
 Starting SSH server.
 Starting Fan deamon.
 Starting flush daemon -> spin down after 30 min.
 / #
view · edit · print · history · Last edited by rwhitby.
Originally by rwhitby.
Page last modified on June 23, 2007, at 03:08 PM