NSLU2-Linux
view · edit · print · history

DSMG600.BootLog History

Hide minor edits - Show changes to markup

March 18, 2006, at 04:03 PM by dwery -- adjusted formatting
Added line 1:
 [=
Changed lines 329-330 from:

Please press Enter to activate this console.

to:

Please press Enter to activate this console. =]

February 23, 2006, at 11:11 PM by dyoung -- stock bootlog
Added lines 1-328:

+Flag is 3ffb 2--Flag is 8

RedBoot(tm) bootstrap and debug environment [ROM] Red Hat certified release, version 1.92p1 - built 22:09:37, Jul 15 2005

Platform: IXDP425? Development Platform (XScale?) Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x04000000, 0x00415070-0x03fd1000 available FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each. script is fis load filesystem -b 0x00B00000 fis load kernel -b 0x00600000 exec 0x00600000

== Executing boot script in 5.000 seconds - enter ^C to abort RedBoot> fis load filesystem -b 0x00B00000 RedBoot> fis load kernel -b 0x00600000 RedBoot> exec 0x00600000 Using base address 0x00600000 and length 0x00200000 Uncompressing Linux............................................................. ........... done, booting the kernel. Linux version 2.4.27-uc1 (root@RH90PC?) (gcc version 3.2.1 20020930 (MontaVista?))

 #12 Fri May 13 20:34:53 CST 2005

CPU: XScale?-IXP4xx?/IXC11xx? revision 1 Machine: GST D-Link DSMG600 Security risk: creating user accessible mapping for 0x60000000 at 0xff00f000 Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000 Security risk: creating user accessible mapping for 0x55000000 at 0xf5000000 On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,115200 root=/dev/ram rw initrd=0x00B00000,8M mem=64M@0x00000000 Calibrating delay loop... 266.24 BogoMIPS? Memory: 64MB = 64MB total Memory: 54180KB available (1754K code, 594K data, 64K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX PCI Autoconfig: Found Bus 0, Device 1, Function 0 PCI Autoconfig: BAR 0, I/O, size=0x8, address=0xfffffff8 PCI Autoconfig: BAR 1, I/O, size=0x4, address=0xfffffff4 PCI Autoconfig: BAR 2, I/O, size=0x8, address=0xffffffe8 PCI Autoconfig: BAR 3, I/O, size=0x4, address=0xffffffe4 PCI Autoconfig: BAR 4, I/O, size=0x10, address=0xffffffd0 PCI Autoconfig: Found Bus 0, Device 2, Function 0 PCI Autoconfig: BAR 0, Mem, size=0x10000, address=0x4bff0000 PCI Autoconfig: Found Bus 0, Device 3, Function 0 PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffffa0 PCI Autoconfig: Found Bus 0, Device 3, Function 1 PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffff80 PCI Autoconfig: Found Bus 0, Device 3, Function 2 PCI Autoconfig: BAR 0, Mem, size=0x100, address=0x4bfeff00 PCI Autoconfig: Found Bus 0, Device 4, Function 0 PCI Autoconfig: BAR 0, I/O, size=0x100, address=0xfffffe00 PCI Autoconfig: BAR 1, Mem, size=0x100, address=0x4bfefe00 PCI: bus0: Fast back to back transfers disabled PCI: Via IRQ fixup for 00:03.0, from 27 to 11 PCI: Via IRQ fixup for 00:03.1, from 26 to 10 Linux NET4?.0 for Linux 2.4 Based upon Swansea University Computer Society NET3?.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver v1.1.22 [Flags: R/W] i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) i2c-proc.o version 2.6.1 (20010830) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at 0xff000003 (irq = 15) is a XScale? UART ttyS01 at 0xff001003 (irq = 13) is a XScale? UART RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AEC6280?: IDE controller at PCI slot 00:01.0 AEC6280?: chipset revision 7 AEC6280?: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

    ide0: BM-DMA at 0xffffffd0-0xffffffd7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xffffffd8-0xffffffdf, BIOS settings: hdc:pio, hdd:pio

SCSI subsystem driver Revision: 1.00 cfi_cmdset_0001: Erase suspend on write enabled Using buffer write method Creating 8 MTD partitions on "IXP425 Flash": 0x00000000-0x00040000 : "RedBoot" 0x00040000-0x00240000 : "kernel" 0x00240000-0x00840000 : "filesystem" 0x00840000-0x00ec0000 : "usr" 0x00ec0000-0x00f00000 : "unallocated" 0x00f00000-0x00fc0000 : "sysconfig" 0x00fc0000-0x00fc1000 : "RedBoot config" 0x00fe0000-0x01000000 : "FIS directory" ixp425_i2c_init gpio_data.scl_line:04 gpio_data.sda_line:05 usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:03.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:03.2: irq 25, pci mem 4bfeff00 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 Manufacturer: Linux 2.4.27-uc1 ehci_hcd Product: VIA Technologies, Inc. USB 2.0 SerialNumber?: 00:03.2 hub.c: USB hub found hub.c: 4 ports detected host/usb-uhci.c: $Revision: 1.275 $ time 20:35:08 May 13 2005 host/usb-uhci.c: High bandwidth mode enabled host/usb-uhci.c: USB UHCI at I/O 0xffffffa0, IRQ 27 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 Product: USB UHCI Root Hub SerialNumber?: ffffffa0 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: USB UHCI at I/O 0xffffff80, IRQ 26 host/usb-uhci.c: Detected 2 ports hub.c: port 2 over-current change usb.c: new USB bus registered, assigned bus number 3 hub.c: port 3 over-current change Product: USB UHCI Root Hub SerialNumber?: ffffff80 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver usblp printer.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. Initializing Cryptographic API NET4?: Linux TCP/IP 1.0 for NET4?.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4?: Unix domain sockets 1.0/SMP for Linux NET4?.0. NET4?: Ethernet Bridge 008 for NET4?.0 NET4?: Linux IPX 0.47 for NET4?.0 IPX Portions Copyright (c) 1995 Caldera, Inc. IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc. NET4?: AppleTalk? 0.18a for Linux NET4?.0 NetWinder? Floating Point Emulator V0.97 (double precision) RAMDISK: Compressed image found at block 0 Freeing initrd memory: 8192K VFS: Mounted root (ext2 filesystem). Freeing init memory: 64K serial console detected. Disabling virtual terminals. init started: BusyBox? v0.60.3 (2002.12.19-12:19+0000) multi-call binary No HD has been detected Using ixp425.o Using exp_bus.o Exp Bus cs1=0xc5887000 Reading RTC Value and Put into System DateS? <7> i2c_outb:A2 [1] [0] [1] [0] [0] [0] [1] [0] A

 READ npe0_mac = 00-13-46-48-04-aa

<7> i2c_outb:00 [0] [0] [0] [0] [0] [0] [0] [0] A

 S <7> i2c_outb:A3

[1] [0] [1] [0] [0] [0] [1] [1] A

 i2c_inb:[0][0][0][0][1][0][0][0] 08
 Am i2c_inb:[1][0][0][0][0][0][0][0] 80
 Am i2c_inb:[1][0][1][1][0][1][1][0] b6
 Am i2c_inb:[1][0][1][1][0][1][0][0] b4
 Am i2c_inb:[1][0][0][0][0][0][1][1] 83
 Am i2c_inb:[1][0][1][0][1][0][0][0] a8
 Am i2c_inb:[1][0][1][1][0][1][1][0] b6
 Am i2c_inb:[0][0][1][0][1][0][0][0] 28
 Am i2c_inb:[0][1][1][1][0][0][0][0] 70
 Am i2c_inb:[1][1][1][0][1][0][0][0] e8
 Am i2c_inb:[1][1][1][1][1][1][0][1] fd
 Am i2c_inb:[1][1][1][0][0][0][0][0] e0
 Am i2c_inb:[1][1][1][0][0][0][0][0] e0
 Am i2c_inb:[1][0][1][1][0][1][0][0] b4
 Am i2c_inb:[0][0][1][1][0][1][1][1] 37
 NAm? i2c-algo-bit.o: read 15 bytes.

dhcp_check P S <7> i2c_outb:A2 [1] [0] [1] [0] [0] [0] [1] [0] A

 <7> i2c_outb:00

[0] [0] [0] [0] [0] [0] [0] [0] A

 S <7> i2c_outb:A3

[1] [0] [1] [0] [0] [0] [1] [1] A

 i2c_inb:[0][0][0][0][1][0][0][0] 08
 Am i2c_inb:[1][0][0][0][0][0][0][0] 80
 Am i2c_inb:[1][0][1][1][0][1][1][0] b6
 Am i2c_inb:[1][0][1][1][0][1][0][0] b4
 Am i2c_inb:[1][0][0][0][0][0][1][1] 83
 Am i2c_inb:[1][0][1][0][1][0][0][0] a8
 Am i2c_inb:[1][0][1][1][0][1][1][0] b6
 Am i2c_inb:[0][0][1][0][1][0][0][0] 28
 Am i2c_inb:[0][1][1][1][0][0][0][0] 70
 Am i2c_inb:[1][1][1][0][1][0][0][0] e8
 Am i2c_inb:[1][1][1][1][1][1][0][1] fd
 Am i2c_inb:[1][1][1][0][0][0][0][0] e0
 Am i2c_inb:[1][1][1][0][0][0][0][0] e0
 Am i2c_inb:[1][0][1][1][0][1][0][0] b4
 Am i2c_inb:[0][0][1][1][0][1][1][1] 37
 NAm? i2c-algo-bit.o: read 15 bytes.

P Fri Aug 28 03:34:00 UTC 1970 ken: start tftpd rm: cannot remove `/tmp/log_xor': No such file or directory rm: cannot remove `/tmp/smtp_xor': No such file or directory hdd status and disk full log program start... using setting file: /e_storage/bin/log.set chmod 777 /tmp/e-storage.bin ken: part 1 ken: part 2 ken: part 3 ken: part 4 ken: part 5 [ *** Starting GIGA LAN Driver *** ] Using /lib/modules/2.4.27-uc1/kernel/drivers/net/velocityget.o GST_mac_addr=00:13:46:48:04:aa VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.13c Copyright (c) 2002, 2003 VIA Networking Technologies, Inc. eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter eth0: MAC=00:13:46:48:04:AA IO=0xfffffe00 Mem=0x4bfefe00 IRQ=23 device eth0 entered promiscuous mode Starting system log daemon: syslogd klogd. usb init $** can't synthesize root hub events dhcp_check GLOBALSUNTECH E_SERVER 1.0Completed Getting Config... [ *** Starting Wireless Driver *** ] Using /lib/wireless/wlan.o wlan: 0.8.4.2 (EXPERIMENTAL) Using /lib/wireless/ath_hal.o ath_hal: 0.9.14.10 (AR5210?, AR5211?, AR5212?, RF5111?, RF5112?, RF2413?, REGOPS_FUNC) Using /lib/wireless/ath_rate_atheros.o ath_rate_atheros: Version 2.0.1 Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved Using /lib/wireless/ath_pci.o ath_pci: 0.9.4.5 (EXPERIMENTAL) get 5212 type:4 get 5212 type:14 get 5212 type:13 get 5212 type:1 get 5212 type:1 get 5212 type:1 get 5212 type:1 get 5212 type:1 get 5212 type:1 get 5212 type:3 get 5212 type:5 get 5212 type:5 get 5212 type:17 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36M bps 48Mbps 54Mbps ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.9 phy 4.3 5ghz radio 4.6 ath0: 802.11 address: 00:13:46:a0:40:63 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Atheros 5212: mem=0x4bff0000, irq=28 Radio Down eth0: Promiscuous mode enabled. Velocity is AUTO mode eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. device eth0 left promiscuous mode dhcp_check dhcp_check dhcp_check dhcp_check dhcp_check dhcp_check dhcp_check dhcp_check dhcpcd[150]: terminating on signal 2

Get IP from DHCP Server Fail Fall back to IP 192.168.0.100 Velocity is AUTO mode dhcp_check Completed Getting IP... Completed Getting IP...ixp425.o: opened.

HTTP Server Starting ... Hello smtp_txt 1 1 1 c0a80064

 0 1 1 1

exp_bus.o: opened. EXP_BUS no is 0, EXP_BUS Data is 0 exp_bus.o: closed. Smb.conf not exist rm: cannot remove `/home/smb.conf': No such file or directory Share Folder Not Exist UpnpAV? Not Exist Starting Samba daemons: nmbdHDD is umounted HDD is umounted

 smbd.

Starting portmap daemon: portmap. exports.nfs not exist Already Has exports.nfs Exporting directories for NFS kernel daemon...done. Starting nfsd: Initializing UPnP? Sdk with

         ipaddress = (null) port = 0

UPnP? Initialized

         ipaddress= 192.168.0.100 port = 49152

Specifying the webserver root directory -- ./web Registering the RootDevice?

         with desc_doc_url: http://192.168.0.100:49152/e-storage.xml

RootDevice? Registered Initializing State Table State Table Initialized ixp425.o: closed.

Please press Enter to activate this console. Please press Enter to activate this console.

view · edit · print · history · Last edited by dwery.
Originally by dyoung.
Page last modified on March 18, 2006, at 04:03 PM