NSLU2-Linux
view · edit · print · history

DS101.Kernel26Bootlog History

Hide minor edits - Show changes to markup

December 08, 2006, at 03:47 PM by fcarolo -- revert spam
Changed lines 1-3 from:

Find the best way for you! <a href="http://work-at-home.superdatastorage.info/work-at-home.html">work at home</a> <a href="http://work-at-home.superdatastorage.info/at-home-work.html">at home work</a>

to:

Yes, it's a DS101 booting a 2.6.16-rc2-git8 kernel

It's not quite done yet, this needs to be fixed:

  • TrueFFS support (Unless this is what is called (I)NTFL in the 2.6 kernels.
  • RTC drifts. A lot.
  • Network support (The MAC-address needed for network initialization is embedded
    on the flash, so until flash works, neither will network).
 
RedBoot> g
Uncompressing Linux................................................................................ done, booting the kernel.
Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #12 Thu Feb 23 05:31:44 CET 2006
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: Synology DiskStation DS101
Warning: bad configuration page, trying to continue
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init rtc-rs5c372.probe=0,0x32 root=/dev/sda2 ro noinitrd noir0
PID hash table entries: 512 (order: 9, 8192 bytes)
IXP4xx: FREQ=66666600 COUNT=666665
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62268KB available (2037K code, 416K data, 80K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:02.0 on pci bus
dmabounce: registered device 0000:00:02.1 on pci bus
dmabounce: registered device 0000:00:02.2 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
DiskStation DS101 button driver v0.2
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (SUMMARY)  (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
PCI: enabling device 0000:00:01.0 (0140 -> 0141)
ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1062 bmdma 0x1040 irq 28
ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1066 bmdma 0x1048 irq 28
ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : pata_artop
ATA: abnormal status 0x7F on port 0x105F
ata2: disabling port
scsi1 : pata_artop
  Vendor: ATA       Model: Maxtor 6L160P0    Rev: BAH4
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $
Using configured DiskOnChip probe address 0x50000000
DiskOnChip found at 0x50000000
NAND device: Manufacturer ID: 0x98, Chip ID: 0x73 (Toshiba NAND 16MiB 3,3V 8-bit)
Found DiskOnChip BNAND Media Header at 0x14000
    bootRecordID          = BNAND
    NoOfBootImageBlocks   = -1
    NoOfBinaryPartitions  = 1
    NoOfBDTLPartitions    = 1
    BlockMultiplerBits    = 0
    FormatFlgs            = 1
    OsakVersion           = 5.1.4.0
    PercentUsed           = 95
    PARTITION[0] ->
        virtualUnits    = 967
        firstUnit       = 6
        lastUnit        = 972
        flags           = 0x20000000
        spareUnits      = 0
    PARTITION[1] ->
        virtualUnits    = 1
        firstUnit       = 974
        lastUnit        = 1023
        flags           = 0xc0000000
        spareUnits      = 2
 inftla: unknown partition table
Could not find valid boot record
NFTL: could not mount device
Creating 2 MTD partitions on "DiskOnChip Millennium Plus":
0x00018000-0x00f34000 : " DiskOnChip BDK partition"
0x00f38000-0x01000000 : " DiskOnChip BDTL partition"
PCI: enabling device 0000:00:02.2 (0140 -> 0142)
PCI: Via IRQ fixup for 0000:00:02.2, from 26 to 10
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 26, io mem 0x48010000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.3
PCI: enabling device 0000:00:02.0 (0140 -> 0141)
PCI: Via IRQ fixup for 0000:00:02.0, from 27 to 11
uhci_hcd 0000:00:02.0: UHCI Host Controller
uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:02.0: irq 27, io base 0x00001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: enabling device 0000:00:02.1 (0140 -> 0141)
PCI: Via IRQ fixup for 0000:00:02.1, from 27 to 11
uhci_hcd 0000:00:02.1: UHCI Host Controller
uhci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:02.1: irq 27, io base 0x00001020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 3-1:1.0: pl2303 converter detected
usb 3-1: pl2303 converter now attached to ttyUSB0
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
i2c /dev entries driver
rs5c372 0-0032: chip found, driver version 0.2
rs5c372 0-0032: rtc intf: sysfs
rs5c372 0-0032: rtc intf: proc
rs5c372 0-0032: rtc intf: dev (254:0)
rs5c372 0-0032: rtc core: registered rs5c372 as rtc0
Registered led device: power
Registered led device: usbcopy-solid
Registered led device: usbcopy-blink
Registered led device: status-ready
Registered led device: status-error
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rs5c372 0-0032: setting the system clock to 2006-02-24 02:12:38 (1140747158)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing init memory: 80K
INIT: version 2.86 booting
SlugOS booting...
Creating initial device nodes...
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
Starting syslogd/klogd: done
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCGIFFLAGS: No such device
route: SIOC[ADD|DEL]RT: No such device
done.
Starting portmap daemon: portmap.
Nothing to be done
INIT: Entering runlevel: 3
Starting Dropbear SSH server: dropbear.

DebianSlug 3.6-beta pioneer ttyS0

December 08, 2006, at 12:23 AM by Jason --
Changed lines 1-254 from:

Yes, it's a DS101 booting a 2.6.16-rc2-git8 kernel

It's not quite done yet, this needs to be fixed:

  • TrueFFS support (Unless this is what is called (I)NTFL in the 2.6 kernels.
  • RTC drifts. A lot.
  • Network support (The MAC-address needed for network initialization is embedded
    on the flash, so until flash works, neither will network).
 
RedBoot> g
Uncompressing Linux................................................................................ done, booting the kernel.
Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #12 Thu Feb 23 05:31:44 CET 2006
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: Synology DiskStation DS101
Warning: bad configuration page, trying to continue
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init rtc-rs5c372.probe=0,0x32 root=/dev/sda2 ro noinitrd noir0
PID hash table entries: 512 (order: 9, 8192 bytes)
IXP4xx: FREQ=66666600 COUNT=666665
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62268KB available (2037K code, 416K data, 80K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:02.0 on pci bus
dmabounce: registered device 0000:00:02.1 on pci bus
dmabounce: registered device 0000:00:02.2 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
DiskStation DS101 button driver v0.2
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (SUMMARY)  (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
PCI: enabling device 0000:00:01.0 (0140 -> 0141)
ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1062 bmdma 0x1040 irq 28
ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1066 bmdma 0x1048 irq 28
ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : pata_artop
ATA: abnormal status 0x7F on port 0x105F
ata2: disabling port
scsi1 : pata_artop
  Vendor: ATA       Model: Maxtor 6L160P0    Rev: BAH4
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $
Using configured DiskOnChip probe address 0x50000000
DiskOnChip found at 0x50000000
NAND device: Manufacturer ID: 0x98, Chip ID: 0x73 (Toshiba NAND 16MiB 3,3V 8-bit)
Found DiskOnChip BNAND Media Header at 0x14000
    bootRecordID          = BNAND
    NoOfBootImageBlocks   = -1
    NoOfBinaryPartitions  = 1
    NoOfBDTLPartitions    = 1
    BlockMultiplerBits    = 0
    FormatFlgs            = 1
    OsakVersion           = 5.1.4.0
    PercentUsed           = 95
    PARTITION[0] ->
        virtualUnits    = 967
        firstUnit       = 6
        lastUnit        = 972
        flags           = 0x20000000
        spareUnits      = 0
    PARTITION[1] ->
        virtualUnits    = 1
        firstUnit       = 974
        lastUnit        = 1023
        flags           = 0xc0000000
        spareUnits      = 2
 inftla: unknown partition table
Could not find valid boot record
NFTL: could not mount device
Creating 2 MTD partitions on "DiskOnChip Millennium Plus":
0x00018000-0x00f34000 : " DiskOnChip BDK partition"
0x00f38000-0x01000000 : " DiskOnChip BDTL partition"
PCI: enabling device 0000:00:02.2 (0140 -> 0142)
PCI: Via IRQ fixup for 0000:00:02.2, from 26 to 10
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 26, io mem 0x48010000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.3
PCI: enabling device 0000:00:02.0 (0140 -> 0141)
PCI: Via IRQ fixup for 0000:00:02.0, from 27 to 11
uhci_hcd 0000:00:02.0: UHCI Host Controller
uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:02.0: irq 27, io base 0x00001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: enabling device 0000:00:02.1 (0140 -> 0141)
PCI: Via IRQ fixup for 0000:00:02.1, from 27 to 11
uhci_hcd 0000:00:02.1: UHCI Host Controller
uhci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:02.1: irq 27, io base 0x00001020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 3-1:1.0: pl2303 converter detected
usb 3-1: pl2303 converter now attached to ttyUSB0
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
i2c /dev entries driver
rs5c372 0-0032: chip found, driver version 0.2
rs5c372 0-0032: rtc intf: sysfs
rs5c372 0-0032: rtc intf: proc
rs5c372 0-0032: rtc intf: dev (254:0)
rs5c372 0-0032: rtc core: registered rs5c372 as rtc0
Registered led device: power
Registered led device: usbcopy-solid
Registered led device: usbcopy-blink
Registered led device: status-ready
Registered led device: status-error
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rs5c372 0-0032: setting the system clock to 2006-02-24 02:12:38 (1140747158)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing init memory: 80K
INIT: version 2.86 booting
SlugOS booting...
Creating initial device nodes...
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
end_request: I/O error, dev mtdblock0, sector 0
Starting syslogd/klogd: done
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCGIFFLAGS: No such device
route: SIOC[ADD|DEL]RT: No such device
done.
Starting portmap daemon: portmap.
Nothing to be done
INIT: Entering runlevel: 3
Starting Dropbear SSH server: dropbear.

DebianSlug 3.6-beta pioneer ttyS0

to:

Find the best way for you! <a href="http://work-at-home.superdatastorage.info/work-at-home.html">work at home</a> <a href="http://work-at-home.superdatastorage.info/at-home-work.html">at home work</a>

February 24, 2006, at 10:13 AM by repvik --
Changed lines 22-23 from:

Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init rtc-rs5c372.probe=0,0x32 root=/dev/sda2 ro noinitrd noir0PID hash table entries: 512 (order: 9, 8192 bytes)

to:

Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init rtc-rs5c372.probe=0,0x32 root=/dev/sda2 ro noinitrd noir0 PID hash table entries: 512 (order: 9, 8192 bytes)

February 24, 2006, at 10:12 AM by repvik --
Changed lines 11-12 from:

Uncompressing Linux................................................................................ done, booting the kernel.Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #12 Thu Feb 23 05:31:44 CET 2006

to:

Uncompressing Linux................................................................................ done, booting the kernel. Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #12 Thu Feb 23 05:31:44 CET 2006

February 24, 2006, at 08:51 AM by repvik --
Changed lines 10-11 from:

Uncompressing Linux....................................................................................done, booting the ker. Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #94 PREEMPT Fri Feb 17 07:02:49 CET 2006

to:

RedBoot> g Uncompressing Linux................................................................................ done, booting the kernel.Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #12 Thu Feb 23 05:31:44 CET 2006

Changed line 21 from:

Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init rtc-rs5c372.probe=0,0x32 root=/dev/sda2 ro noinitrd noirq0PID hash table entries: 512 (order: 9, 8192 bytes)

to:

Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init rtc-rs5c372.probe=0,0x32 root=/dev/sda2 ro noinitrd noir0PID hash table entries: 512 (order: 9, 8192 bytes)

Changed line 26 from:

Memory: 62140KB available (2153K code, 425K data, 84K init)

to:

Memory: 62268KB available (2037K code, 416K data, 80K init)

Deleted line 32:

IXP4xx?: FREQ=66666666 COUNT=666665

Changed lines 74-102 from:

No device found

to:

DiskOnChip? found at 0x50000000 NAND device: Manufacturer ID: 0x98, Chip ID: 0x73 (Toshiba NAND 16MiB 3,3V 8-bit) Found DiskOnChip? BNAND Media Header at 0x14000

    bootRecordID          = BNAND
    NoOfBootImageBlocks?   = -1
    NoOfBinaryPartitions?  = 1
    NoOfBDTLPartitions?    = 1
    BlockMultiplerBits?    = 0
    FormatFlgs?            = 1
    OsakVersion?           = 5.1.4.0
    PercentUsed?           = 95
    PARTITION[0] ->
        virtualUnits    = 967
        firstUnit       = 6
        lastUnit        = 972
        flags           = 0x20000000
        spareUnits      = 0
    PARTITION[1] ->
        virtualUnits    = 1
        firstUnit       = 974
        lastUnit        = 1023
        flags           = 0xc0000000
        spareUnits      = 2
 inftla: unknown partition table

Could not find valid boot record NFTL: could not mount device Creating 2 MTD partitions on "DiskOnChip? Millennium Plus": 0x00018000-0x00f34000 : " DiskOnChip? BDK partition" 0x00f38000-0x01000000 : " DiskOnChip? BDTL partition"

Deleted line 142:

input: ixp4xx beeper as /class/input/input0

Changed line 144 from:

rs5c372 0-0032: chip found, driver version 0.1

to:

rs5c372 0-0032: chip found, driver version 0.2

Changed lines 163-164 from:

rs5c372 0-0032: setting the system clock to 2006-02-18 06:55:19 (1140245719)

to:

rs5c372 0-0032: setting the system clock to 2006-02-24 02:12:38 (1140747158) kjournald starting. Commit interval 5 seconds

Changed lines 167-168 from:

Freeing init memory: 84K kjournald starting. Commit interval 5 seconds

to:

Freeing init memory: 80K

Added lines 171-208:

end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0

Added lines 211-238:

end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0 end_request: I/O error, dev mtdblock0, sector 0

Deleted lines 251-252:

pioneer login:

February 24, 2006, at 08:19 AM by repvik --
Deleted line 3:
  • DiskOnChip support
February 18, 2006, at 06:53 AM by repvik --
Changed lines 4-5 from:
  • DiskOnChip? support
  • TrueFFS? support (Unless this is what is called (I)NTFL in the 2.6 kernels.
to:
  • DiskOnChip support
  • TrueFFS support (Unless this is what is called (I)NTFL in the 2.6 kernels.
Changed lines 7-9 from:
  • Network support (The MAC-address needed for network initialization is embedded on the flash, so until

flash works, network won't).

to:
  • Network support (The MAC-address needed for network initialization is embedded
    on the flash, so until flash works, neither will network).
February 18, 2006, at 06:52 AM by repvik --
Added lines 1-9:

Yes, it's a DS101 booting a 2.6.16-rc2-git8 kernel

It's not quite done yet, this needs to be fixed:

  • DiskOnChip? support
  • TrueFFS? support (Unless this is what is called (I)NTFL in the 2.6 kernels.
  • RTC drifts. A lot.
  • Network support (The MAC-address needed for network initialization is embedded on the flash, so until

flash works, network won't).

February 17, 2006, at 11:58 AM by repvik -- New bootlog
Changed lines 2-6 from:

RedBoot> load -r -v -b 0x01000000 -m xmodem Raw file loaded 0x01000000-0x01148d7f, assumed entry at 0x01000000 xyzModem - CRC mode, 10524(SOH)/0(STX)/0(CAN) packets, 2 retries RedBoot> go Uncompressing Linux......................................................................................... done, booting t.Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #8 Sat Feb 11 00:41:51 CET 2006

to:

Uncompressing Linux....................................................................................done, booting the ker. Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #94 PREEMPT Fri Feb 17 07:02:49 CET 2006

Changed line 13 from:

Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init root=/dev/sda2 ro rootdelay=7 rootfstype=ext3 noinitrd n0PID hash table entries: 512 (order: 9, 8192 bytes)

to:

Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init rtc-rs5c372.probe=0,0x32 root=/dev/sda2 ro noinitrd noirq0PID hash table entries: 512 (order: 9, 8192 bytes)

Changed line 18 from:

Memory: 61988KB available (2269K code, 460K data, 84K init)

to:

Memory: 62140KB available (2153K code, 425K data, 84K init)

Added line 25:

IXP4xx?: FREQ=66666666 COUNT=666665

Added line 34:

DiskStation? DS101 button driver v0.2

Changed lines 39-40 from:

io scheduler deadline registered (default)

to:

io scheduler deadline registered io scheduler cfq registered (default)

Changed lines 66-67 from:

IXP4XXFlash?: map_probe failed Using configured DiskOnChip? probe address 0x50000

to:

Using configured DiskOnChip? probe address 0x50000000 No device found

Changed lines 69-70 from:

ehci_hcd 0000:00:02.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.2 setup! ehci_hcd 0000:00:02.2: init 0000:00:02.2 fail, -19

to:

PCI: Via IRQ fixup for 0000:00:02.2, from 26 to 10 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: irq 26, io mem 0x48010000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected

Changed line 81 from:

uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1

to:

uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2

Changed lines 83-85 from:

usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected

to:

usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected

Changed lines 87-88 from:

uhci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup! uhci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19

to:

PCI: Via IRQ fixup for 0000:00:02.1, from 27 to 11 uhci_hcd 0000:00:02.1: UHCI Host Controller uhci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:02.1: irq 27, io base 0x00001020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected

Added lines 95-96:

usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice

Changed lines 99-104 from:

usbcore: registered new driver catc drivers/usb/net/catc.c: v2.8 CATC EL1210A? NetMate? USB Ethernet driver pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new driver pegasus drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27) usbcore: registered new driver rtl8150

to:

usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 pl2303 3-1:1.0: pl2303 converter detected usb 3-1: pl2303 converter now attached to ttyUSB0 usbcore: registered new driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303? USB to serial adaptor driver input: ixp4xx beeper as /class/input/input0

Changed lines 110-112 from:

Registered led device: wlan Registered led device: ready Registered led device: disk-1

to:

rs5c372 0-0032: chip found, driver version 0.1 rs5c372 0-0032: rtc intf: sysfs rs5c372 0-0032: rtc intf: proc rs5c372 0-0032: rtc intf: dev (254:0) rs5c372 0-0032: rtc core: registered rs5c372 as rtc0 Registered led device: power Registered led device: usbcopy-solid Registered led device: usbcopy-blink Registered led device: status-ready Registered led device: status-error

Changed lines 129-131 from:

drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting 7sec before mounting root device... kjournald starting. Commit interval 5 seconds

to:

rs5c372 0-0032: setting the system clock to 2006-02-18 06:55:19 (1140245719)

Added line 133:

kjournald starting. Commit interval 5 seconds

Changed line 137 from:

hwclock: Could not access RTC: No such file or directory

to:

EXT3?-fs warning: maximal mount count reached, running e2fsck is recommended

Deleted lines 138-139:

WARNING: Couldn't open directory /lib/modules/2.6.16-rc2-git8: No such file or directory FATAL: Could not open /lib/modules/2.6.16-rc2-git8/modules.dep.temp for writing: No such file or directory

Changed lines 153-159 from:

pioneer login: root Password: root@pioneer:~# ls /dev/ bus initctl mem pts sda1 ttyS1 zero console kmem null random sda2 urandom full kmsg port rtc tty usbdev1.1 i2c-0 log ptmx sda ttyS0 watchdog

to:

pioneer login:

February 10, 2006, at 11:59 PM by repvik -- Updated to booting debianslug ;-)
Changed lines 2-6 from:

Uncompressing Linux......................................................................................... done, booting t.Linux version 2.6.16-rc2-git2 (root@linux) (gcc version 3.3.4) #75 Wed Feb 8 22:34:47 CET 2006

to:

RedBoot> load -r -v -b 0x01000000 -m xmodem Raw file loaded 0x01000000-0x01148d7f, assumed entry at 0x01000000 xyzModem - CRC mode, 10524(SOH)/0(STX)/0(CAN) packets, 2 retries RedBoot> go Uncompressing Linux......................................................................................... done, booting t.Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #8 Sat Feb 11 00:41:51 CET 2006

Changed line 8 from:

Machine: Iomega NAS 100d

to:

Machine: Synology DiskStation? DS101

Changed lines 16-17 from:

Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 init=/linuxrc pcf8563.hctosys=1 root=/dev/sda2 ro rootdelay=7 root5Unknown boot option `pcf8563.hctosys=1': ignoring PID hash table entries: 512 (order: 9, 8192 bytes)

to:

Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init root=/dev/sda2 ro rootdelay=7 rootfstype=ext3 noinitrd n0PID hash table entries: 512 (order: 9, 8192 bytes)

Changed line 21 from:

Memory: 61988KB available (2268K code, 475K data, 80K init)

to:

Memory: 61988KB available (2269K code, 460K data, 84K init)

Changed lines 48-49 from:

ATA: abnormal status 0x7F on port 0x1057 ata1: dev 0 ATA-6, max UDMA/100, 312581808 sectors: LBA48?

to:

ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48?

Changed line 54 from:
  Vendor: ATA       Model: WDC WD1600BB?-00H  Rev: 15.0
to:
  Vendor: ATA       Model: Maxtor 6L160P0    Rev: BAH4?
Changed line 58 from:

SCSI device sda: drive cache: write back

to:

SCSI device sda: drive cache: write back w/ FUA

Changed lines 61-62 from:

SCSI device sda: drive cache: write back

 sda: sda1 sda2 sda3
to:

SCSI device sda: drive cache: write back w/ FUA

 sda: sda1 sda2
Added lines 64-65:

NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $

Added line 67:

Using configured DiskOnChip? probe address 0x50000

Added lines 93-95:

Registered led device: wlan Registered led device: ready Registered led device: disk-1

Added line 104:

NET: Registered protocol family 17

Deleted lines 106-107:

EXT3?-fs: INFO: recovery required on readonly filesystem. EXT3?-fs: write access will be enabled during recovery.

Deleted line 107:

EXT3?-fs: recovery complete.

Changed lines 110-115 from:

Freeing init memory: 80K request_module: runaway loop modprobe binfmt-464c request_module: runaway loop modprobe binfmt-464c request_module: runaway loop modprobe binfmt-464c request_module: runaway loop modprobe binfmt-464c request_module: runaway loop modprobe binfmt-464c

to:

Freeing init memory: 84K INIT: version 2.86 booting SlugOS booting... Creating initial device nodes... hwclock: Could not access RTC: No such file or directory EXT3? FS on sda2, internal journal WARNING: Couldn't open directory /lib/modules/2.6.16-rc2-git8: No such file or directory FATAL: Could not open /lib/modules/2.6.16-rc2-git8/modules.dep.temp for writing: No such file or directory Starting syslogd/klogd: done Setting up IP spoofing protection: rp_filter. Configuring network interfaces... SIOCSIFADDR: No such device SIOCSIFNETMASK: No such device SIOCGIFFLAGS: No such device route: SIOC[ADD|DEL]RT: No such device done. Starting portmap daemon: portmap. Nothing to be done INIT: Entering runlevel: 3 Starting Dropbear SSH server: dropbear.

DebianSlug 3.6-beta pioneer ttyS0

pioneer login: root Password: root@pioneer:~# ls /dev/ bus initctl mem pts sda1 ttyS1 zero console kmem null random sda2 urandom full kmsg port rtc tty usbdev1.1 i2c-0 log ptmx sda ttyS0 watchdog

February 10, 2006, at 06:17 PM by repvik --
Added lines 1-110:
 
Uncompressing Linux......................................................................................... done, booting t.Linux version 2.6.16-rc2-git2 (root@linux) (gcc version 3.3.4) #75 Wed Feb 8 22:34:47 CET 2006
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: Iomega NAS 100d
Warning: bad configuration page, trying to continue
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 init=/linuxrc pcf8563.hctosys=1 root=/dev/sda2 ro rootdelay=7 root5Unknown boot option `pcf8563.hctosys=1': ignoring
PID hash table entries: 512 (order: 9, 8192 bytes)
IXP4xx: FREQ=66666600 COUNT=666665
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 61988KB available (2268K code, 475K data, 80K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:02.0 on pci bus
dmabounce: registered device 0000:00:02.1 on pci bus
dmabounce: registered device 0000:00:02.2 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (SUMMARY)  (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
PCI: enabling device 0000:00:01.0 (0140 -> 0141)
ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1062 bmdma 0x1040 irq 28
ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1066 bmdma 0x1048 irq 28
ATA: abnormal status 0x7F on port 0x1057
ata1: dev 0 ATA-6, max UDMA/100, 312581808 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : pata_artop
ATA: abnormal status 0x7F on port 0x105F
ata2: disabling port
scsi1 : pata_artop
  Vendor: ATA       Model: WDC WD1600BB-00H  Rev: 15.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
IXP4XXFlash: map_probe failed
PCI: enabling device 0000:00:02.2 (0140 -> 0142)
ehci_hcd 0000:00:02.2: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.2 setup!
ehci_hcd 0000:00:02.2: init 0000:00:02.2 fail, -19
USB Universal Host Controller Interface driver v2.3
PCI: enabling device 0000:00:02.0 (0140 -> 0141)
PCI: Via IRQ fixup for 0000:00:02.0, from 27 to 11
uhci_hcd 0000:00:02.0: UHCI Host Controller
uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:02.0: irq 27, io base 0x00001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: enabling device 0000:00:02.1 (0140 -> 0141)
uhci_hcd 0000:00:02.1: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.1 setup!
uhci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver catc
drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new driver rtl8150
i2c /dev entries driver
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 7sec before mounting root device...
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing init memory: 80K
request_module: runaway loop modprobe binfmt-464c
request_module: runaway loop modprobe binfmt-464c
request_module: runaway loop modprobe binfmt-464c
request_module: runaway loop modprobe binfmt-464c
request_module: runaway loop modprobe binfmt-464c

view · edit · print · history · Last edited by fcarolo.
Based on work by Jason and repvik.
Originally by repvik.
Page last modified on December 08, 2006, at 03:47 PM