NSLU2-Linux
view · edit · print · history

DS101.DS106XRev31Fw426BootLog History

Hide minor edits - Show changes to markup

February 15, 2007, at 09:15 PM by flipflip --
Added lines 1-420:

Log of a Rev 2.2 Synology CS-406 booting (Firmware revision 382)

(:table border=0 width=100% bgcolor=#eeeeff:) (:cell:)

 


PPCBoot 2.0.0 (Aug  1 2006 - 12:01:46)                                      

CPU:   MPC8245 Revision 1.4 at 266.666 MHz: 16 kB I-Cache 16 kB D-Cache                                                                       
I2C:   ready            
DRAM:  DRAM BANK = 1                    
MAX_DRAM_SIZE = 8000000                       
MCCR1 = 75e80002                
MCCR4 = 35363231                
MSAR1 = 0         
EMSAR1 = 0          
MEAR1 = 7f          
EMEAR1 = 0          
MSAR2 = 0         
EMSAR2 = 0          
MEAR2 = 0         
EMEAR2 = 0          
MBER = 32000001               
PICR1 = 141b98              
PICR2 = 40604             
128 MB      
addr_sp=7f2ff78, id=7f2ff98, addr=7fc0000                                         
FLASH: flash id = 49                    
vendor = 1, flash id = 49 (flash_id:49)                                       
 2 MB     
*** Warning - bad CRC, using default environment                                                

In:    serial             
Out:   seri         
Err:   serial             
Net:   SK98#0             
Press space to abort autoboot in 1 second                                         
## Booting image at ffe00000 ...                                
   Image Name:   Linux 2.4.22 0425                                  
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)                                                             
   Data Size:    817683 Bytes = 798.5 kB                                        
   Load Address: 00000000                         
   Entry Point:  0000000c                         
   Verifying Checksum ... OK                            
   Uncompressing Kernel Image ... OK                                    
## Loading RAMDisk Image at fff40000 ...                                        
   Image Name:   synology_powerpc_106 0426                                          
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)                                                              
   Data Size:    716159 Bytes = 699.4 kB                                        
   Load Address: 00000000                         
   Entry Point:  0000000c                         
   Verifying Checksum ... OK                            
   Loading Ramdisk to 07e80000, end 07f2ed7f ... OK                                                   
Memory BAT mapping: BAT2=128Mb, BAT3=0Mb, residual: 0Mb                                                       
Linux version 2.4.22-uc0 (root@LinuxImage) (gcc version 3.3.4) #425 Tue Dec 26 1                                                                                
7:22:56 CST 2006                
Synology Hardware Version: DS106v10                                   
On node 0 totalpages: 32768                           
zone(0): 32768 pages.                     
zone(1): 0 pages.                 
zone(2): 0 pages.                 
Kernel command line: console=ttyS0,115200 root=/dev/hda1 rw ip=off in                                                                   
0000,16M hda=bswap syno_hw_version=DS106v10                                           
ide_setup: hda=bswap                    
OpenPIC Version 1.2 (1 CPUs and 138 IRQ sources) at fc040000                                                            
Decrementer frequency = 132.658098 MHz                                      
Warning: real time clock seems stuck!                                     
Calibrating delay loop... 176.53 BogoMIPS                                         
Memory: 126604k available (1276k kernel code, 880k data, 68k init, 0k highmem)                                                                              
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)                                                               
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)                                                            
Mount cache hash table entries: 512 (order: 0, 4096 bytes)                                                          
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)                                                             
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)                                                             
POSIX conformance testing by UNIFIX                                   
PCI: Probing PCI hardware                         
sandpoint_pci.c(sandpoint_map_irq)(71) idsel = 0, pin = 1, irq = 0                                                                  
sandpoint_pci.c(sandpoint_map_irq)(71) idsel = 13, pin = 1, irq = 16                                                                    
sandpoint_pci.c(sandpoint_map_irq)(71) idsel = 14, pin = 1, irq = 17                                                                    
sandpoint_pci.c(sandpoint_map_irq)(71) idsel = 14, pin = 2, irq = 17                                                                    
sandpoint_pci.c(sandpoint_map_irq)(71) idsel = 14, pin =                                                       
sandpoint_pci.c(sandpoint_map_irq)(71) idsel = 15, pin = 1, irq = 18                                                                    
Linux NET4.0 for Linux 2.4                          
Based upon Swansea University Computer Society NET3.039                                                       
Initializing RT netlink socket                              
Starting kswapd               
kinoded started               
VFS: Disk quotas vdquot_6.5.1                             
Journalled Block Device driver loaded                                     
pty: 256 Unix98 ptys configured                               
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en                                                                                
abled     
ttyS00 at 0xfc004500 (irq = 137) is a ST16650                                             
ttyS01 at 0xfc004600 (irq = 138) is a ST16650                                             
Generic RTC Driver v1.07                        
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize                                                                      
physmap.c:421(init_physmap): Unknown flash type, using ppcboot settings.                                                                        
physmap flash device: 200000 at ffe00000                                        
 Amd/Fujitsu Extended Query Table v1.3 at 0x0040                                                
cfi_cmdset_0002.c:95(cfi_cmdset_0002) flash_id=[49], id1=[0],  id2=[3]                                                                      
number of CFI chips: 1                      
cfi_cmdset_0002: Disabling fast programming due to code brokenness.                                                                   
master->size = 200000, erasesize = 10000                                        
No RedBoot partition table detected in Physically mapped flash                                                              
physmap: no partition info available, registering whole flash at once                                                                     
Creating 6 MTD partitions on "Physically mapped flash":                                                       
0x00100000-0x00140000 : "ppcboot"                                 
0x00000000-0x000d0000 : "zImage"                                
0x00140000-0x001f0000 : "rd.gz"                               
0x000d0000-0x000e0000 : "vendor"                                
Mac0 00:11:32:01:00:95                      
vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.                                                     
Vender partition MacNum:1 retlen:64                                   
0x000e0000-0x000f0000 : "RedBoot Config"                                        
0x001f0000-0x00200000 : "FIS directory"                                       
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4                                                           
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx                                                                           
SiI3512 Serial ATA: IDE controller at PCI slot 00:0d.0                                                      
SiI3512 Serial ATA: chipset revision 1                                      
SiI3512 Serial ATA: not 100% native mode: will probe irqs later                                                               
    ide0: MMIO-DMA at 0xc9000e00-0xc9000e07, BIOS settings: hda:pio, hdb:pio                                                                            
    ide1: MMIO-DMA at 0xc9000e08-0xc9000e0f, BIOS settings: hdc:pio, hdd:pio                                                                            
ide0: reset phy, status=0x00000113, siimage_reset                                                 
Probing IDE interface ide0...                             
hda: SAMSUNG SP2504C, ATA DISK drive                                    
blk: queue c0225e68, I/O limit 4095Mb (mask 0xffffffff)                                                       
ide1: reset phy, status=0x00000000, siimage_reset                                                 
ide1: reset phy dead, status=0x00000000                                       
siimage_reset: no drive on ide1.                                
Probing IDE interface ide1...                             
ide0 at 0xc9000e80-0xc9000e87,0xc9000e8a on irq 16                                                  
ide1 at 0xc9000ec0-0xc9000ec7,0xc9000eca on irq 16                                                  
ide2: DISABLED, NO IRQ                      
ide3: DISABLED, NO IRQ                      
ide4: DISABLED, NO IRQ                      
ide5: DISABLED, NO IRQ                      
ide6: DISABLED, NO IRQ                      
ide7: DISABLED, NO IRQ                      
hda: attached ide-disk driver.                              
hda: host protected area => 1                             
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(133)                                                                               
Partition check:                
 hda: hda1 hda2 hda3                    
NET4: Linux TCP/IP 1.0 for NET4.0                                 
IP Protocols: ICMP, UDP, TCP                            
IP: routing cache hash table of 1024 buckets, 8Kbytes                                                     
TCP: Hash tables configured (established 8192 bind 16384)                                                         
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.                                                   
RAMDISK: Compressed image found at block 0                                          
Freeing initrd memory: 699k freed                                 
VFS: Mounted root (ext2 filesystem).                                    
START /linuxrc.syno                   
mount: Mounting none on /sys failed: No                                      
Warning: loading synobios will tsynobios.c(mpc_i2c_init)(2031) i2c_base = fc0030                                                                                
00  
aint the kernel: no licensesynobios: load, major number 201                                                           

  See http://www.tux.org/lkml/#export-tainted for information about tainted modu                                                                                
les   
Starting /usr/syno/bin/synocfgen...                                   
/usr/syno/bin/synocfgen returns 0                                 
synobios: unload                
 /sbin/fsck.ext3 exists, checking /dev/hda1...                                              
/dev/hda1: |=====                                                   /  8.2%                                                                             
/dev/hda1: |=======                                                 - 12.4                                                                          
/dev/hda1: |==============                                          \ 24.7%                                                                             
/dev/hda1: |================                                        | 28.8%                                                                             
/dev/hda1: |=====================                                   / 37.1%                                                                             
/dev/hda1: |==============================                          - 53.5%                                                                             
/dev/hda1: |================================                        \ 57.6%                                                                             
/dev/hda1: |=====================================                   | 65.9%                                                                             
/dev/hda1: |=================================                                              
/dev/hda1: |=================================================       - 88.2%                                                                             
/dev/hda1: |========================================================| 100.0%                                                                              
  
 
    2638 inodes used (7%)                         
      24 non-contiguous inodes (0.9%)                                     
         # of inodes with ind/dind/tind blocks: 340/41/0                                                        
   82076 blocks used (60%)                          
       0 bad blocks                   
       0 large files                    

    1838 regular files                      
     213 directories                    
      31 character device files                               
     192 block device files                           
       0 fifos              
       0 links              
     354 symbolic links (354 fast s                                 
       1 socket               
--------        
    2629 files              
/sbin/fsck.ext3 returns 0                         
Mounting /dev/hda1 /tmpRoot                           
kjournald starting.  Commit interval 5 seconds                                              
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal                                                                 
EXT3-fs: mounted filesystem with ordered data mode.                                                   
------------upgrade                   
Begin upgrade procedure                       
Mount data partition                    
/bin/mount /dev/hda3 /tmpData                             
kjournald starting.  Commit interval 5 seconds                                              
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended                                                                           
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0                                         
EXT3-fs: mounted filesystem with ordered data mode.                                                   
No upgrade file exists                      
End upgrade procedure                     
============upgrade                   
/dev/hda1 /tmpRoot ext3 rw 0 0                              
linuxrc.syno executed successfully.                                   
Starting /etc/rc ...                 
Mounting proc filesy                  
Check new disk...                 
Not new disk. Do nothing.                         
Adding Swap: 393584k swap-space (priority -1)                                             
/dev/hda1 on / type ext3 (rw)                             
/tmp on /tmp type tmpfs (rw)                            
Hostname ds106x               
0.0.0.0 ds106x              
Network interfaces: eth0 lo                           
Load appletalk.o...                   
NET4: AppleTalk 0.18a for Linux NET4.0                                      
Load fat.o...             
Load netlink_dev.o...                     
Network Kernel/User communications module 0.04                                              
Load reiserfs.o...                  
Load vfat.o...              
Load ntfs.o...              
NTFS driver 2.1.6b [Flags: R/O DEBUG MODULE].                                             
Load scsi_mod.o...                  
SCSI subsystem driver Revision: 1.00                                    
Load sd_mod.o...                
Load sg.o...            
Load usbcore.o...                 
usb.c: registered new driver usbdevfs                                     
usb.c: registered new driver hub                                
Load quota_v2.o...                  
Warning: loading quota_v2 will taint the kernel: no license                                                           
  See http://www.tux.org/lkml/#export-tainted for information about tainted modu                                                                                
les   
Mounting usbdevfs...                    
sk98lin: Network Device Driver v8.41.2.3                                        
(C)Copyright 1999-2006 Marvell(R).                                  
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter                                                      
      PrefPort:A  RlmtMode:Check Link State                                           
Load synobios....                 
Warning: loading synobios wsynobios.c(m                                      
ill taint the kernel: no lisynobios: load, major number 201                                                           
cense     
  See http://www.tux.org/lkml/#export-tainted for information about tainted modu                                                                                
les   
mknod: synobios: File exists                            
eth0: network connection up using port A                                        
    speed:           100                        
    autonegotiation: yes                        
    duplex mode:     full                         
    flowctrl:        symmetric                              
    irq moderation:  disabled                             
    scatter-gather:  enabled                            
    tx-checksum:     enabled                            
    rx-checksum:     enabled                            
eth0      Link encap:Ethernet  HWaddr 00:11:32:01:00:95                                                       
          inet addr:192.168.1.10  Bcast:192.168.1.255  Mask:255.255.255.0                                                                         
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1                                                            
          RX packets:3 errors:0 dropped:0 overruns:0 frame:0                                                            
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0                                                              
          collisions:0 txqueuelen:100                                     
          RX bytes:196 (196.0 B)  TX bytes:196 (196.0 B)                                                        
          Interrupt:18 Memory:bfff8000-0                                        

lo        Link encap:Local Loopback                                   
          inet addr:127.0.0.1  Mask:255.0.0.0                                             
          UP LOOPBACK RUNNING  MTU:1643                                      
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0                                                            
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0                                                              
          collisions:0 txqueuelen:0                                   
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)                                                

Add default router 192.168.1.1                              
kernel.panic = 3                
Starting syslogd...                   
Pass s00_synocheckfstab ...                           
Pass CheckSynoinfo ...                      
Pass CheckUser              
Pass CheckSmbConf ...                     
Pass CheckCronTab ...                     
Pass CheckGroup.                
Pass s62_synocheckapple ...                           
Checking and Mounting filesystem(s) ...                                       
start findhostd               
/dev/hda3. Clean.                 
Mounting /dev/hda3 on /volume1.                               
kjournald starting.  Commit interval 5 seconds                                              
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended                                                                           
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal                                                                 
EXT3-fs: mounted filesystem with ordered data mode.                                                   
Quotaon on /volume1.                    
synokerneltz: set kernel time zone to -60                                         
kernel.core_pattern = /volume1/@%e.core                                       
kernel.suid_dumpable = 2                        
Starting scemd ...                  
Starting Card Reader Polling Daemon ...                                       
synocheckshare: Pass SYNOICheckShare()                                      
synocheckshare: Pass SYNOICheckShareExt()                                         
cat: /var/run/scheduler.pid: No such file or directory                                                      
synocheckshare: Pass SYNOICheckServiceLink()                                            
synobootup: BEGIN                 
synobootup: END               
Starting inetd...                 
Starting crond...                 
Starting PostgreSQL...                      
LOG:  could not create unrecognized address family 10 socket: Address family not                                                                                
 supported by protocol                      
LOG:  database system was shut down at 2007-01-15 23:37:25 CET                                                              
LOG:  checkpoint record is at 0/9042A98                                       
LOG:  redo record is at 0/9042A98; undo record is at 0/0; shutdown TRUE                                                                       
LOG:  next transaction ID: 15935; next OID: 25321                                                 
LOG:  database system is ready                              
Update photo log table where log id = 0 to test db existence                                                            
UPDATE 0        
Update photoImage table to test new table existence                                                   
UPDATE 0        
Update media type table where type id = 0 to test db existence                                                              
 ?column?         
----------          
(0 rows)        

Update MediaServer table to test new table existence                                                    
UPDATE 0        
MySQL is not enabled. Skip...                             
Volume of service download is not found                                       
volume : 0          
Download hasn't set its' volume, let user to choose...                                                      
 ?column?         
-------      
        1         
(1 row)       

Update download queue table and set all pid to -1                                                 
UPDATE 0        
UPDATE 0        
Starting Download Station scheduler daemon ...                                              
printer found at volume 1                         
Starting lpd...               
Starting Synology Indexing Daemon ...                                     

##################                  
 Starting Samba               
##################                  
Load ehci-hcd.o...                  
ehci_hcd 00:0e.2: NEC Corporation USB 2.0                                         
ehci_hcd 00:0e.2: irq 17, pci mem c9119f00                                          
usb.c: new USB bus registered, assigned bus number 1                                                    
PCI: 00:0e.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.                                                                      
PCI: 00:0e.2 PCI cache line size corrected to 32.                                                 
ehci_hcd 00:0e.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4                                                                    
hub.c: USB hub found                    
hub.c: 5 ports detected                       
USB_DEVICE: This is hub. No need to call_policy_interface.                                                          
Load usb-ohci.o...                  
usb-ohci.c: USB OHCI at membase 0xc9121000, IRQ 17                                                  
usb-ohci.c: usb-00:0e.0, NEC Corporation USB                                            
usb.c: new USB bus registered, assigned bus number 2                                                    
hub.c: USB hub found                    
hub.c: 3 ports detected                       
USB_DEVICE: This is hub. No need to call_policy_interface.                                                          
usb-ohci.c: USB OHCI at membase 0xc9123000, IRQ 17                                                  
usb-ohci.c: usb-00:0e.1, NEC Corporation USB (#2)                                                 
usb.c: new USB bus registered, assigned bus number 3                                                    
hub.c: USB hub found                    
hub.c: 2 ports detected                       
USB_DEVICE: This is hub. No need to call_policy_interface.                                                          
Load usb-uhci.o...                  
usb-uhci.c: $Revision: 1.6 $ time 17:26:03 Dec 26 2006                                                      
usb-uhci.c: High bandwidth mode enabled                                       
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver                                                                 
insmod: init_module: usb-uhci: No such device                                             
Load usb-storage.o...                     
Initializing USB Mass Storage driver...                                       
usb.c: registered new driver usb-storage                                        
USB Mass Storage support registered.                                    
Load printer.o...                 
usb.c: registered new driver usblp                                  
printer.c: v0.11: USB Printer Device Class driver                                                 
Load hid.o...             
usb.c: registered new driver hiddev                                   
usb.c: registered new driver hid                                
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>                                                                
hid-core.c: USB HID support drivers                                   
Starting local daemons:test stress.sh                                     
Starting apple network...                         
SiI3512 Serial ATA: IDE controller at PCI slot 00:0d.0
SiI3512 Serial ATA: chipset revision 1
SiI3512 Serial ATA: not 100% native mode: will probe irqs later
killall: sshd: no process killed
Media service is disabled. Skip...
Starting sshd ...
Start System Apache Server .....-f /usr/syno/apache/conf/httpd.conf-sys
/usr/syno/etc/rc.d/S97apache-sys.sh: system httpd started
Start User Apache Server .....
rc.ssods ..
rc.cleanup .. done.
rc.logrotate .. /usr/syno/etc/rc.d/S97apache-user.sh: user httpd started
start findhostd
done.
Skipping start of SlimServer, auto start is disabled.
rc.ssods done.
.
Local package initialization:startup daemons
.

done.
Wed Jan 17 20:52:56 CET 2007

ds106x login:


(:tableend:)

view · edit · print · history · Last edited by flipflip.
Originally by flipflip.
Page last modified on February 15, 2007, at 09:15 PM