NSLU2-Linux
view · edit · print · history

DS101.DS101Rev3BootLog History

Hide minor edits - Show changes to markup

September 04, 2005, at 11:07 PM by repvik --
Changed lines 70-71 from:

................................................................ ...........read data error at 1172c000, error code = 25

to:

...........................................................................read data error at 1172c000, error code = 25

Changed lines 75-77 from:

................................................................ ................................................................ .............................5

to:

.............................................................................................................................................................5

Changed lines 79-80 from:

Uncompressing Linux............................................. ....................................... done, booting the kernel.

to:

Uncompressing Linux.................................................................................... done, booting the kernel. Linux version 2.4.22-uc0 (root@image) (gcc version 3.0.2) #2 Tue Jun 7 11:21:41 CST 2005 CPU: XScale?-IXP425/IXC1100? revision 1 Machine: Intel IXDP425? Development Platform Security risk: creating user accessible mapping for 0x60000000 at 0xff00f000 Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000 On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,115200 root=/dev/hda4 rw ip=off initrd=0x00800000,8M mem=64M@0x00000000 hda=bswap ide_setup: hda=bswap Calibrating delay loop... 266.24 BogoMIPS? Memory: 64MB = 64MB total Memory: 53784KB available (2221K code, 520K data, 76K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)

August 29, 2005, at 05:16 PM by repvik --
Added lines 386-514:

Booting with NPE enabled: (:table border=0 width=100% bgcolor=#eeeeff:) (:cell:)

 
+
Booting Menu:
1.Enable NPE driver
2.Disable NPE driver
Choice:1
Can't identify FLASH, sorry, man a0, dev f8, id [<Not a string: 0xB934   >]
0000B924: A0 F8 01 10 12 10 A0 00  4F 04 07 17 12 10 A0 00  |........O.......|
0000B934: 4F 04 08 17 12 10 A0 00  4F 04 07 9A 12 10 A0 00  |O.......O.......|
0000B944: 4F 04 11 30 80 01 01 30  12 10 A0 00 4F 04 9F F0  |O..0...0....O...|
0000B954: 9F F0 82 00                                       |....            |
FLASH: driver init failed: Unknown error
**Warning** FLASH configuration checksum error or invalid key
Use 'fconfig -i' to [re]initialize database
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
cyg_pci_find_matching - func is at 1e02cfc
cyg_pci_find_next: start[ffffffff] ...
   Bus: 0, Dev: 0, Fn: 0, Vendor: 8086
... PCI vendor = 8086, device = 8500, class b4000
cyg_pci_find_next: start[0] ...
   Bus: 0, Dev: 20, Fn: 0, Vendor: 1106
... PCI vendor = 1106, device = 3038, class c0300
cyg_pci_find_next: start[a000] ...
   Bus: 0, Dev: 20, Fn: 1, Vendor: 1106
... PCI vendor = 1106, device = 3038, class c0300
cyg_pci_find_next: start[a100] ...
   Bus: 0, Dev: 20, Fn: 2, Vendor: 1106
... PCI vendor = 1106, device = 3104, class c0320
cyg_pci_find_next: start[a200] ...
   Bus: 0, Dev: 21, Fn: 0, Vendor: 1191
... PCI vendor = 1191, device = 8, class 18000
cyg_pci_find_next: start[a800] ...
nothing.
NPEB major[1] minor[0] build[0]
NPEC major[1] minor[0] build[0]
phyPresent[0] = 0
phyPresent[1] = 1
phyPresent[2] = 0
phyPresent[3] = 0
phyPresent[4] = 0
phyPresent[5] = 0
phyPresent[6] = 0
phyPresent[7] = 0
phyPresent[8] = 0
phyPresent[9] = 0
phyPresent[10] = 0
phyPresent[11] = 0
phyPresent[12] = 0
phyPresent[13] = 0
phyPresent[14] = 0
phyPresent[15] = 0
phyPresent[16] = 0
phyPresent[17] = 0
phyPresent[18] = 0
phyPresent[19] = 0
phyPresent[20] = 0
phyPresent[21] = 0
phyPresent[22] = 0
phyPresent[23] = 0
phyPresent[24] = 0
phyPresent[25] = 0
phyPresent[26] = 0
phyPresent[27] = 0
phyPresent[28] = 0
phyPresent[29] = 0
phyPresent[30] = 0
phyPresent[31] = 0
No phy for NPEB found!
Wait for PHY 1 to be ready ...
PHY 1 configuration:
PHY Status:
    Link is Up
    Auto Negotiation Completed
PHY Configuration:
    Speed: 10Mb/s
    Half Duplex
    Auto Negotiation Disabled
npe_init: MAC Address = 00 01 02 03 04 05
... waiting for BOOTP information
Ethernet eth1: MAC address 00:01:02:03:04:05
FLASH configuration checksum error or invalid key
IP: 10.0.0.8/255.255.255.0, Gateway: 10.0.0.1
Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version Synology - built 11:03:06, Aug 10 2004

Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x20000000, [0x00022850-0x1fff1000] available
FLASH: 0x00000000 - 0x00000001, 0 blocks of 0x00000000 bytes each.
Synology RedBoot Version : Synology Aug 10 2004 11:03:06
never found vendor area
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> msys_run
  Socket Number is 0x0
    +flSetWindowSize
    vol.windows.base = 0x0
    -flSetWindowSize
  flSetWindowSize...
  socket->window.baseAddress = 0x50000
    +flSetWindowSize
    vol.windows.base = 0x50000000
    -flSetWindowSize
Binary partition physical length = f1c000
Used size = 180000
size of partition = 180000
number of partition = 1
...........................................................................read data error at 1172c000, error code = 25
Binary partition physical length = f1c000
Used size = 650000
size of partition = 650000
number of partition = 1
.............................................................................................................................................................5
RedBoot> exec -c "console=ttyS0,115200 root=/dev/hda4 rw ip=off initrd=0x00800000,8M mem=64M@0x00000000 hda=bswap" 0x11600000

(:tableend:)

August 29, 2005, at 05:07 PM by repvik --
Added lines 358-385:

What really happens when you press the powerbutton: (:table border=0 width=100% bgcolor=#eeeeff:) (:cell:)

 
 synobios_interrupt_gpio08: shutdown button pushed
synobios_ioctl: SYNOIO_NEXTEVENT event id 223
The system is going down NOW !!
Sending SIGTERM to all processes.
                                 Aug 30 04:04:38 dhcpcd[244]: terminating on signal 15

ixp425_eth: eth0: Leaving promiscuous mode
ixp425_eth: eth0: Leaving promiscuous mode
ixp425_eth: eth0: Leaving promiscuous mode
Sending SIGKILL to all processes.
Unmounting all file systems.
umount failed, 16
                 ide0(3,4):clm-6006: writing inode 77 on readonly FS
ide0(3,4):clm-6005: writing inode 77 on readonly FS
The system is halted. Press Reset or turn off power
                                                   ide0(3,4):clm-6006: writing inode 77 on readonly FS
ide0(3,4):clm-6005: writing inode 77 on readonly FS
flushing ide devices: hda
Power down.
we'll turn the power off.

(:tableend:)

August 29, 2005, at 05:05 PM by repvik --
Changed lines 84-86 from:

FAT: check NTFS format (test 1) FAT: check NTFS format (test 2) FAT: bogus logical sector size 0

to:

Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX PCI Autoconfig: Found Bus 0, Device 1, Function 0 PCI Autoconfig: BAR 0, I/O, size=0x8, address=0xfffffff8 PCI Autoconfig: BAR 1, I/O, size=0x4, address=0xfffffff4 PCI Autoconfig: BAR 2, I/O, size=0x8, address=0xffffffe8 PCI Autoconfig: BAR 3, I/O, size=0x4, address=0xffffffe4 PCI Autoconfig: BAR 4, I/O, size=0x10, address=0xffffffd0 PCI Autoconfig: Found Bus 0, Device 2, Function 0 PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffffa0 PCI Autoconfig: Found Bus 0, Device 2, Function 1 PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffff80 PCI Autoconfig: Found Bus 0, Device 2, Function 2 PCI Autoconfig: BAR 0, Mem, size=0x100, address=0x4bffff00 PCI: bus0: Fast back to back transfers disabled ixdp425_map_irq: PCI slot 0 , pin 1, assigned irq -1 ixdp425_map_irq: PCI slot 1 , pin 1, assigned irq 28 ixdp425_map_irq: PCI slot 2 , pin 1, assigned irq 27 ixdp425_map_irq: PCI slot 2 , pin 2, assigned irq 27 ixdp425_map_irq: PCI slot 2 , pin 3, assigned irq 26 PCI: Via IRQ fixup for 00:02.0, from 27 to 11 PCI: Via IRQ fixup for 00:02.1, from 27 to 11 Linux NET4?.0 for Linux 2.4 Based upon Swansea University Computer Society NET3?.039 Initializing RT netlink socket Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xff000003 (irq = 15) is a XScale? UART ttyS01 at 0xff001003 (irq = 13) is a XScale? UART RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PPP generic driver version 2.4.2 PPP MPPE compression module registered PPP Deflate Compression module registered Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AEC6280?: IDE controller at PCI slot 00:01.0 AEC6280?: chipset revision 7 AEC6280?: not 100% native mode: will probe irqs later AEC6280?: ROM enabled at 0x26200000 Enabling PCI burst mode

    ide0: BM-DMA at 0xffffffd0-0xffffffd7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xffffffd8-0xffffffdf, BIOS settings: hdc:pio, hdd:pio

/source/uclinux2422/linux-2.4.x/include/asm/ide.h(64) id:0xc03ce400 id->capability:0x0000002f hda: Maxtor 6L160P0, ATA DISK drive blk: queue c02c26c0, no I/O memory limit ide0 at 0xfffffff8-0xffffffff,0xfffffff6 on irq 28 hda: attached ide-disk driver. hda: host protected area => 1 hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(133) Partition check:

 hda: hda1 hda2 hda3 hda4

SCSI subsystem driver Revision: 1.00 M-sys DOCPLUS: Flash device type 9875, Media Type 4 M-sys DOCPLUS: unitSize 16384, mediaSize 16777216, chipSize 16777216, interleaving 1 Mac0 00:11:32:00:48:9d vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0. Vender partition MacNum?:1 retlen:64 usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:02.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:02.2: irq 26, pci mem c4880f00 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 4 ports detected host/usb-uhci.c: $Revision: 1.5 $ time 11:22:59 Jun 7 2005 host/usb-uhci.c: High bandwidth mode enabled host/usb-uhci.c: USB UHCI at I/O 0xffffffa0, IRQ 27 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: USB UHCI at I/O 0xffffff80, IRQ 27 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver usblp printer.c: v0.11: USB Printer Device Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4?: Linux TCP/IP 1.0 for NET4?.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4?: Unix domain sockets 1.0/SMP for Linux NET4?.0. NET4?: AppleTalk? 0.18a for Linux NET4?.0 NetWinder? Floating Point Emulator V0.97 (double precision) RAMDISK: Compressed image found at block 0 Freeing initrd memory: 8192K VFS: Mounted root (ext2 filesystem). START /linuxrc.syno START /usr/syno/bin/synorcvol --boot-time Reinstall/Writeback/UpdateLib? : [0][0][0] NO reinstall. Force install disk [no]

Added lines 192-203:

reiserfs: checking transaction log (device ide0(3,1)) ... for (ide0(3,1)) ide0(3,1):Using r5 hash to sort names Setting up swapspace version 1, size = 403034112 bytes START umount local umount: forced umount of (null) failed! umount: forced umount of (null) failed! START fsck /dev/hda4. Clean. START mount /dev/hda4 reiserfs: found format "3.6" with standard journal reiserfs: using ordered data mode

Added lines 207-226:

mount ret=0 Mount OK START cleaning /tmp START cp etc START cp lib START cp var START cp usr/syno/etc START umount all umount: forced umount of (null) failed! umount: forced umount of (null) failed! cp: /tmp/usb*: No such file or directory linuxrc.syno executed successfully. FAT: check NTFS format (test 1) FAT: check NTFS format (test 2) FAT: bogus logical sector size 0 reiserfs: found format "3.6" with standard journal reiserfs: using ordered data mode reiserfs: checking transaction log (device ide0(3,4)) ... for (ide0(3,4)) ide0(3,4):Using r5 hash to sort names

Added lines 230-355:

Mounting proc filesystem... Reinstall/Writeback/UpdateLib? : [0][0][0] NO reinstall. Force install disk [no] reiserfs: found format "3.6" with standard journal reiserfs: using ordered data mode reiserfs: checking transaction log (device ide0(3,1)) ... for (ide0(3,1)) ide0(3,1):Using r5 hash to sort names Swapping on /dev/hda2. Adding Swap: 393584k swap-space (priority -1) Check integrity of configs and logs. Checking files in /writeable/configs/etc. Checking files in /writeable/configs/usr/syno/etc. Checking files in /writeable/logs/var. Hostname Pioneer 10.0.0.7 Pioneer Network interfaces: eth0 lo Using /lib/modules/ixp400.o Warning: loading ixp400 will taint the kernel: no license

  See http://www.tux.org/lkml/#export-tainted for information about tainted modules

Module init. Using /lib/modules/ixp425_eth.o Warning: loading ixp425_eth will taint the kernel: non-GPL license - Copyright (c) Intel Corporation. 2002

  See http://www.tuxixp425_eth: Initializing ixp425_eth driver 0.0.9

.org/lkml/#export-tainted for information about tainted modules [error] ixEthMiiPhyScan : unexpected Mii PHY ID 00221619 ixp425_eth: Found PHY 0 at 1 ixp425_eth: eth0 is using the PHY at address 1 ixp425_eth: eth1 is using the PHY at address 1 set_def_mac_addr: gVenderMacNumber:1 ixp425_eth: PHY 0 MAC address is: 00:d8:13:a0:b5:d2 set_def_mac_addr: gVenderMacNumber:1 ixp425_eth: PHY 1 MAC address is: 00:11:32:00:48:9d Load synobios.... Using /lib/modules/synobios.o Warning: loading synobios will taint the kernel: no license

  See http://www.tux.org/lkml/#export-tainted for information about tainted modules

synobios: load, major number 201 mknod: synobios: File exists ixp425_eth: eth0: Leaving promiscuous mode ixp425_eth: eth0: Leaving promiscuous mode ixp425_eth: eth0: Leaving promiscuous mode ixp425_eth: eth0: Leaving promiscuous mode eth0 Link encap:Ethernet HWaddr? 00:11:32:00:48:9D

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 iB)  TX bytes:0 (0.0 iB)

Aug 30 04:02:43 dhcpcd[244]: synoether.c (160) MAC address of interface eth0 is [00:11:32:00:48:9d]

Aug 30 04:02:43 dhcpcd[244]: synoether.c (266) Broadcasting ARPOP_REQUEST for 169.254.200.225

lo Link encap:Local Loopback

          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 iB)  TX bytes:0 (0.0 iB)

kernel.panic = 3 ixp425_eth: eth0: Leaving promiscuous mode ixp425_eth: eth0: Leaving promiscuous mode Aug 30 04:02:43 dhcpcd[244]: dhcpReboot: do not want cache

Starting syslogd... Pass s00_synocheckfstab ... Pass CheckSynoinfo? ... Regen user data Pass CheckSmbConf? ... Pass CheckCronTab? ... Pass CheckGroup?. Pass s62_synocheckapple ... Checking and Mounting filesystem(s) ... Reiserfs super block in block 16 on 0x0 of format 3.6 with standard journal Blocks (total/free): 38905413/38864685 by 4096 bytes Filesystem is NOT cleanly umd Mounting /dev/hda3 on /volume1. reiserfs: found format "3.6" with standard journal reiserfs: using ordered data mode reiserfs: checking transaction log (device ide0(3,3)) ... for (ide0(3,3)) reiserfs: replayed 4 transactions in 0 seconds ide0(3,3):Using r5 hash to sort names Quotacheck on /volume1. Quotaon on /volume1. kernel.core_pattern = /volume1/@%e.core kernel.suid_dumpable = 2 done. Starting scemd... synocheckshare: Pass SYNOICheckShare?() synocheckshare: Pass SYNOICheckShareExt?() synobootup: BEGIN synobootup: END Starting inetd... Starting crond... Starting lpd... test stress.sh Starting apple network... Start Apache Server ..... ixp425_eth: eth0: Leaving promiscuous mode ixp425_eth: eth0: Leaving promiscuous mode ixp425_eth: eth0: Leaving promiscuous mode /usr/syno/etc/rc.d/S97apache.sh: httpd started start findhostd ixp425_eth: eth0: Leaving promiscuous mode Starting local daemons:. Local package initialization: .

Tue Aug 30 04:03:04 CEST 2005

Pioneer login:

FAT: check NTFS format (test 1) FAT: check NTFS format (test 2) FAT: bogus logical sector size 0 reiserfs: found format "3.6" with standard journal reiserfs: using ordered data mode reiserfs: checking transaction log (device ide0(3,4)) ... for (ide0(3,4)) ide0(3,4):Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem). Trying to move old root to /initrd ... okay Freeing init memory: 76K

August 28, 2005, at 06:18 PM by tman --
Added lines 1-96:

Log of a Rev 03 Synology DS-101 booting

(:table border=0 width=100% bgcolor=#eeeeff:) (:cell:)

 
Booting Menu:
1.Enable NPE driver
2.Disable NPE driver
Choice:Can't identify FLASH, sorry, man a0, dev f8, id [<Not a string: 0xB934   >]
0000B924: A0 F8 01 10 12 10 A0 00  4F 04 07 17 12 10 A0 00  |........O.......|
0000B934: 4F 04 08 17 12 10 A0 00  4F 04 07 9A 12 10 A0 00  |O.......O.......|
0000B944: 4F 04 11 30 80 01 01 30  12 10 A0 00 4F 04 9F F0  |O..0...0....O...|
0000B954: 9F F0 82 00                                       |....            |
FLASH: driver init failed: Unknown error
**Warning** FLASH configuration checksum error or invalid key
Use 'fconfig -i' to [re]initialize database
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
FLASH configuration checksum error or invalid key
cyg_pci_find_matching - func is at 1e02cfc
cyg_pci_find_next: start[ffffffff] ...
    Bus: 0, Dev: 0, Fn: 0, Vendor: 8086
... PCI vendor = 8086, device = 8500, class b4000
cyg_pci_find_next: start[0] ...
   Bus: 0, Dev: 20, Fn: 0, Vendor: 1106
... PCI vendor = 1106, device = 3038, class c0300
cyg_pci_find_next: start[a000] ...
   Bus: 0, Dev: 20, Fn: 1, Vendor: 1106
... PCI vendor = 1106, device = 3038, class c0300
cyg_pci_find_next: start[a100] ...
   Bus: 0, Dev: 20, Fn: 2, Vendor: 1106
... PCI vendor = 1106, device = 3104, class c0320
cyg_pci_find_next: start[a200] ...
   Bus: 0, Dev: 21, Fn: 0, Vendor: 1191
... PCI vendor = 1191, device = 8, class 18000
cyg_pci_find_next: start[a800] ...
nothing.
No network interfaces found

RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version Synology - built 11:03:06, Aug 10 2004

Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x20000000, [0x00022850-0x1fff1000] available
FLASH: 0x00000000 - 0x00000001, 0 blocks of 0x00000000 bytes each.
Synology RedBoot Version : Synology Aug 10 2004 11:03:06
never found vendor area
== Executing boot script in 1.000 seconds - enter ^C to abort 
RedBoot> msys_run
  Socket Number is 0x0
    +flSetWindowSize
    vol.windows.base = 0x0
    -flSetWindowSize
  flSetWindowSize...
  socket->window.baseAddress = 0x50000
    +flSetWindowSize
    vol.windows.base = 0x50000000
    -flSetWindowSize
Binary partition physical length = f1c000
Used size = 180000
size of partition = 180000
number of partition = 1
................................................................
...........read data error at 1172c000, error code = 25
Binary partition physical length = f1c000
Used size . 650000
size of partition = 650000
number of partition = 1
................................................................
................................................................
.............................5  
RedBoot> exec -c "console=ttyS0,115200 root=/dev/hda4 rw ip=off 
initrd=0x00800000,8M  mem=64M@0x0000000 hda=bswap" 0x11600000
Using base address 0x10800000 and length 0x00650000
Uncompressing Linux.............................................
....................................... done, booting the  kernel.
FAT: check NTFS format (test 1)
FAT: check NTFS format (test 2)
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,4)) ...
for (ide0(3,4))
ide0(3,4):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem).
Trying to move old root to /initrd ... okay
Freeing init memory: 76K

(:tableend:)

view · edit · print · history · Last edited by repvik.
Based on work by repvik.
Originally by tman.
Page last modified on September 04, 2005, at 11:07 PM