![]() |
Synology CS-407 information /proc/cpuinfo#cat /proc/cpuinfo Processor : ARM926EJ?-Sid(wb) rev 0 (v5l) BogoMIPS? : 499.71 Features : swp half thumb fastmult vfp edsp CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0x926 CPU revision : 0 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 32768 I assoc : 1 I line length : 32 I sets : 1024 D size : 32768 D assoc : 4 D line length : 32 D sets : 256 Hardware : MV-88fxx81 Revision : 0000 Serial : 0000000000000000 uname -a#uname -a Linux Filer 2.6.15 #598 Sat Apr 12 22:16:49 CST 2008 armv5tejl unknown lsmod#lsmod Module Size Used by Tainted: P usbhid 26404 0 usblp 11680 0 usb_storage 32068 0 uhci_hcd 28720 0 ohci_hcd 15204 0 ehci_hcd 30088 0 ds407_synobios 14584 0 nfsd 105220 0 exportfs 4416 1 nfsd ppp_async 9504 0 crc_ccitt 1568 1 ppp_async ppp_generic 22260 1 ppp_async slhc 6368 1 ppp_generic snd_pcm_oss 49184 0 snd_mixer_oss 15424 1 snd_pcm_oss snd_usb_audio 71680 0 snd_pcm 79880 2 snd_pcm_oss,snd_usb_audio snd_timer 20740 1 snd_pcm snd_hwdep 7460 1 snd_usb_audio snd_usb_lib 14848 1 snd_usb_audio snd_rawmidi 21120 1 snd_usb_lib snd 43576 7 snd_pcm_oss,snd_mixer_oss,snd_usb_audio,snd_pcm,snd_timer,snd_hwdep,snd_rawmidi snd_page_alloc 7912 1 snd_pcm soundcore 7620 1 snd quota_v2 9056 2 usbcore 115720 9 usbhid,usblp,usb_storage,uhci_hcd,ohci_hcd,ehci_hcd,snd_usb_audio,snd_usb_lib sg 30464 0 ntfs 115700 0 vfat 10720 0 fat 48444 1 vfat appletalk 32952 0 psnap 2852 1 appletalk llc 5876 1 psnap dmesg#dmesg 1465149168 512-byte hdwr sectors (750156 MB) SCSI device sda: drive cache: write back SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda drivers/scsi/sd.c (1707) Internal disk with bus id: 1 SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: Attached scsi disk sdb drivers/scsi/sd.c (1707) Internal disk with bus id: 2 SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 sdc3 sd 2:0:0:0: Attached scsi disk sdc drivers/scsi/sd.c (1707) Internal disk with bus id: 3 SCSI device sdd: 1465149168 512-byte hdwr sectors (750156 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 1465149168 512-byte hdwr sectors (750156 MB) SCSI device sdd: drive cache: write back sdd: sdd1 sdd2 sdd3 sd 3:0:0:0: Attached scsi disk sdd physmap flash device: 400000 at ffc00000 DS406?-0: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 DS406?-0: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Searching for RedBoot partition table in DS406?-0 at offset 0x3b0000 6 RedBoot partitions found on MTD device DS406?-0 DS406? flash bank 0: Using RedBoot partition definition Creating 6 MTD partitions on "DS406?-0": 0x003c0000-0x00400000 : "RedBoot" 0x00000000-0x00200000 : "zImage" 0x00200000-0x00380000 : "rd.gz" 0x00380000-0x00390000 : "vendor" eth0: mac address changed Mac1: 00:11:32:01:a5:a8 vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0. Vender partition MacNum?:1 retlen:64 Serial Number: 76C3N00572 0x00390000-0x003b0000 : "RedBoot Config" 0x003b0000-0x003c0000 : "FIS directory" md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 29 MB/s raid6: int32x2 45 MB/s raid6: int32x4 51 MB/s raid6: int32x8 48 MB/s raid6: using algorithm int32x4 (51 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: measuring checksumming speed arm4regs : 429.200 MB/sec 8regs : 369.200 MB/sec 32regs : 513.600 MB/sec raid5: using function: 32regs (513.600 MB/sec) NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 md: Autodetecting RAID arrays. md: autorun ... md: considering sda1 ... md: adding sda1 ... md: sda2 has different UUID to sda1 md: sda3 has different UUID to sda1 md: adding sdb1 ... md: sdb2 has different UUID to sda1 md: sdb3 has different UUID to sda1 md: adding sdc1 ... md: sdc2 has different UUID to sda1 md: sdc3 has different UUID to sda1 md: adding sdd1 ... md: sdd2 has different UUID to sda1 md: sdd3 has different UUID to sda1 md: created md0 md: bind<sdd1> md: bind<sdc1> md: bind<sdb1> md: bind<sda1> md: running: <sda1><sdb1><sdc1><sdd1> raid1: raid set md0 active with 4 out of 4 mirrors md: considering sda2 ... md: adding sda2 ... md: sda3 has different UUID to sda2 md: adding sdb2 ... md: sdb3 has different UUID to sda2 md: adding sdc2 ... md: sdc3 has different UUID to sda2 md: adding sdd2 ... md: sdd3 has different UUID to sda2 md: created md1 md: bind<sdd2> md: bind<sdc2> md: bind<sdb2> md: bind<sda2> md: running: <sda2><sdb2><sdc2><sdd2> raid1: raid set md1 active with 4 out of 4 mirrors md: considering sda3 ... md: adding sda3 ... md: adding sdb3 ... md: adding sdc3 ... md: adding sdd3 ... md: created md2 md: bind<sdd3> md: bind<sdc3> md: bind<sdb3> md: bind<sda3> md: running: <sda3><sdb3><sdc3><sdd3> raid5: device sda3 operational as raid disk 0 raid5: device sdb3 operational as raid disk 1 raid5: device sdc3 operational as raid disk 2 raid5: device sdd3 operational as raid disk 3 raid5: allocated 4204kB for md2 raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2 RAID5? conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda3 disk 1, o:1, dev:sdb3 disk 2, o:1, dev:sdc3 disk 3, o:1, dev:sdd3 md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). ds407_synobios: module license 'Synology Inc.' taints kernel. synobios: load, major number 201 Brand: Synology Model: CS-407 synobios: unload kjournald starting. Commit interval 5 seconds EXT3? FS on md0, internal journal EXT3?-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3?-fs warning: maximal mount count reached, running e2fsck is recommended EXT3? FS on md2, internal journal EXT3?-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3? FS on md0, internal journal EXT3?-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Trying to move old root to /initrd ... okay Freeing init memory: 108K Adding 393464k swap on /dev/md1. Priority:-1 extents:1 across:393464k NET: Registered protocol family 5 NTFS driver 2.1.27 [Flags: R/O DEBUG MODULE]. sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: registered new driver snd-usb-audio CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). synobios: load, major number 201 Brand: Synology Model: CS-407 eth0: link down eth0: link up<5>, full duplex<5>, speed 100 Mbps<5> kjournald starting. Commit interval 5 seconds EXT3?-fs warning: maximal mount count reached, running e2fsck is recommended EXT3? FS on md2, internal journal EXT3?-fs: mounted filesystem with writeback data mode. ehci_platform ehci_platform.4523: (Synology) 88F518x EHCI Host Controller ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000 ehci_platform ehci_platform.4523: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.3 usb 1-1: new high speed USB device using ehci_platform and address 2 Initializing USB Mass Storage driver... Got empty serial number. Generate serial number from product. hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver eth0: link down eth0: link up<5>, full duplex<5>, speed 100 Mbps<5> cat /proc/mtd#cat /proc/mtd dev: size erasesize name mtd0: 00040000 00010000 "RedBoot" mtd1: 00200000 00010000 "zImage" mtd2: 00180000 00010000 "rd.gz" mtd3: 00010000 00010000 "vendor" mtd4: 00020000 00010000 "RedBoot Config" mtd5: 00010000 00010000 "FIS directory" |