PPCBoot 2.0.0 (Jun 21 2006 - 15:11:22)

CPU:   MPC8245 Revision 1.4 at 399.999 MHz: 16 kB I-Cache 16 kB D-Cache
I2C:   ready
DRAM:  DRAM BANK = 1
MAX_DRAM_SIZE = 8000000
MCCR1 = 75e80002
MCCR4 = 35363231
MSAR1 = 0
EMSAR1 = 0
MEAR1 = 7f
EMEAR1 = 0
MSAR2 = 0
EMSAR2 = 0
MEAR2 = 0
EMEAR2 = 0
MBER = 32000001
PICR1 = 141b98
PICR2 = 40604
Synology Brand: Synology
Synology Model: CS-406 (128 MB)
128 MB
addr_sp=7f1ff78, id=7f1ff98, addr=7fc0000
FLASH: flash id = 7e
vendor = 1, flash id = 7e (flash_id:7e)
 4 MB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   SK98#0
Press Ctrl+C to abort autoboot in 1 second
## Booting image at ffc00000 ...
   Image Name:   Linux 2.6.15 0382
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1203293 Bytes =  1.1 MB
   Load Address: 00000000
   Entry Point:  0000000c
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ffe00000 ...
   Image Name:   synology_ppc824x_cs406e 0382
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    801388 Bytes = 782.6 kB
   Load Address: 00000000
   Entry Point:  0000000c
   Verifying Checksum ... OK
   Loading Ramdisk to 07e5b000, end 07f1ea6c ... OK
Linux version 2.6.15 (root@LinuxImage) (gcc version 3.3.4) #382 Sun Aug 6 21:48:02 CST 2006

Synology Hardware Version: DS406v20

Motorola SPS Sandpoint Test Platform

Port by Synology Inc. (product@synology.com) 

Built 1 zonelists

Kernel command line: console=ttyS0,115200 root=/dev/md0 rw ip=off initrd=0x00800000,16M hda=bswap syno_hw_version=DS406v20

OpenPIC Version 1.2 (1 CPUs and 11 IRQ sources) at fc040000

PID hash table entries: 1024 (order: 10, 16384 bytes)

Decrementer frequency = 133.333765 MHz

Warning: real time clock seems stuck!

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 125880k available (2000k kernel code, 904k data, 124k init, 0k highmem)

Mount-cache hash table entries: 512

checking if image is initramfs...it isn't (no cpio magic); looks like an initrd

Freeing initrd memory: 782k freed

NET: Registered protocol family 16

PCI: Probing PCI hardware

arch/ppc/platforms/sandpoint.c(200) idsel = 12, pin = 1, irq = 20

arch/ppc/platforms/sandpoint.c(200) idsel = 13, pin = 1, irq = 16

arch/ppc/platforms/sandpoint.c(200) idsel = 14, pin = 1, irq = 17

arch/ppc/platforms/sandpoint.c(200) idsel = 14, pin = 2, irq = 17

arch/ppc/platforms/sandpoint.c(200) idsel = 14, pin = 3, irq = 17

arch/ppc/platforms/sandpoint.c(200) idsel = 15, pin = 1, irq = 18

fsl-i2c.1: failed to claim resource 0

unable to register device 0

fsl-dma.0: failed to claim resource 0

unable to register device 1

fsl-dma.1: failed to claim resource 0

unable to register device 2

SCSI subsystem initialized

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Initializing Cryptographic API

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

Generic RTC Driver v1.07

Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 2 ports, IRQ sharing disabled

serial8250.0: ttyS0 at MMIO 0xfc004500 (irq = 25) is a 16550A

serial8250.1: ttyS1 at MMIO 0xfc004600 (irq = 26) is a 16550A

RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize

loop: loaded (max 8 devices)

drivers/scsi/sata_sil.c (596) Delay 10 seconds to wait for disk ready.

sata_sil 0000:00:0c.0: Applying R_ERR on DMA activate FIS errata fix

ata1: SATA max UDMA/100 cmd 0xC9000E80 ctl 0xC9000E8A bmdma 0xC9000E00 irq 20

ata2: SATA max UDMA/100 cmd 0xC9000EC0 ctl 0xC9000ECA bmdma 0xC9000E08 irq 20

ata1: no device found (phy stat 00000000)

scsi0 : sata_sil

ata1: device plugged

ata1: Device not ready. Try to reset...

ata2: dev 0 ATA-7, max UDMA7, 488281250 sectors: LBA48

ata2: dev 0 configured for UDMA/100

scsi1 : sata_sil

  Vendor: ATA       Model: SAMSUNG SP2504C   Rev: VT10

  Type:   Direct-Access                      ANSI SCSI revision: 05

drivers/scsi/sata_sil.c (596) Delay 10 seconds to wait for disk ready.

sata_sil 0000:00:0d.0: Applying R_ERR on DMA activate FIS errata fix

ata3: SATA max UDMA/100 cmd 0xC9002C80 ctl 0xC9002C8A bmdma 0xC9002C00 irq 16

ata4: SATA max UDMA/100 cmd 0xC9002CC0 ctl 0xC9002CCA bmdma 0xC9002C08 irq 16

ata1: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48

ata1: dev 0 configured for UDMA/100

  Vendor: ATA       Model: SAMSUNG SP2504C   Rev: VT10

  Type:   Direct-Access                      ANSI SCSI revision: 05

ata3: no device found (phy stat 00000000)

scsi2 : sata_sil

ata4: no device found (phy stat 00000000)

scsi3 : sata_sil

drivers/scsi/sd.c (1648) Internal disk with bus id: 1

SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB)

SCSI device sdb: drive cache: write back

SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB)

SCSI device sdb: drive cache: write back

 sdb: sdb1 sdb2 sdb3

sd 1:0:0:0: Attached scsi disk sdb

drivers/scsi/sd.c (1648) Internal disk with bus id: 0

SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)

SCSI device sda: drive cache: write back

SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)

SCSI device sda: drive cache: write back

 sda: sda1 sda2 sda3

sd 0:0:0:0: Attached scsi disk sda

physmap flash device: 1000000 at ff000000

DS406-0: Found 1 x16 devices at 0x0 in 8-bit bank

 Amd/Fujitsu Extended Query Table at 0x0040

DS406-0: Swapping erase regions for broken CFI table.

number of CFI chips: 1

cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

Searching for RedBoot partition table in DS406-0 at offset 0x3f0000

6 RedBoot partitions found on MTD device DS406-0

DS406 flash bank 0: Using RedBoot partition definition

Creating 6 MTD partitions on "DS406-0":

0x00300000-0x00340000 : "RedBoot"

0x00000000-0x00200000 : "zImage"

0x00200000-0x00300000 : "rd.gz"

0x00340000-0x00350000 : "vendor"

Mac0 00:11:32:01:46:da

vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.

Vender partition MacNum:1 retlen:64

0x00350000-0x00370000 : "RedBoot Config"

0x003f0000-0x00400000 : "FIS directory"

md: raid0 personality registered as nr 2

md: raid1 personality registered as nr 3

md: raid5 personality registered as nr 4

raid5: measuring checksumming speed

   8regs     :   477.000 MB/sec

   8regs_prefetch:   388.000 MB/sec

   32regs    :   491.000 MB/sec

   32regs_prefetch:   410.000 MB/sec

raid5: using function: 32regs (491.000 MB/sec)

md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27

md: bitmap version 4.39

NET: Registered protocol family 2

IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

TCP established hash table entries: 8192 (order: 3, 32768 bytes)

TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

TCP reno registered

TCP bic registered

NET: Registered protocol family 1

NET: Registered protocol family 17

md: Autodetecting RAID arrays.

md: autorun ...

md: considering sdb1 ...

md:  adding sdb1 ...

md: sdb2 has different UUID to sdb1

md: sdb3 has different UUID to sdb1

md:  adding sda1 ...

md: sda2 has different UUID to sdb1

md: sda3 has different UUID to sdb1

md: created md0

md: bind<sda1>

md: bind<sdb1>

md: running: <sdb1><sda1>

raid1: raid set md0 active with 2 out of 4 mirrors

md: considering sdb2 ...

md:  adding sdb2 ...

md: sdb3 has different UUID to sdb2

md:  adding sda2 ...

md: sda3 has different UUID to sdb2

md: created md1

md: bind<sda2>

md: bind<sdb2>

md: running: <sdb2><sda2>

raid1: raid set md1 active with 2 out of 4 mirrors

md: considering sdb3 ...

md:  adding sdb3 ...

md:  adding sda3 ...

md: created md2

md: bind<sda3>

md: bind<sdb3>

md: running: <sdb3><sda3>

raid1: raid set md2 active with 2 out of 2 mirrors

md: ... autorun DONE.

RAMDISK: Compressed image found at block 0

VFS: Mounted root (ext2 filesystem).

START /linuxrc.syno
ds406_synobios: module license 'Synology Inc' taints kernel.

drivers/synobios/ds406-synobios.c(617)target = 32

I2C read 0x49

I2C read 0x48

I2C read 0x29

I2C read 0x4

I2C read 0x28

I2C read 0x12

I2C read 0x6

synobios: load, major number 201

====== MODEL_CS406 ======

Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
synobios: unload

 /sbin/fsck.ext3 exists, checking /dev/md0... 

/dev/md0: |=======                                                 | 11.7%   

/dev/md0: |=============                                           / 23.3%   

/dev/md0: |====================                                    - 35.0%   

/dev/md0: |=================================                       \ 58.3%   

/dev/md0: |=======================================                 | 70.0%   

/dev/md0: |=========================================               / 72.8%   

/dev/md0: |===========================================             - 77.7%   

/dev/md0: |=============================================           \ 81.1%   

/dev/md0: |================================================        | 85.4%   

/dev/md0: |==================================================      / 89.3%   

/dev/md0: |========================================================| 100.0%   

                                                                               

    3198 inodes used (3%)
      95 non-contiguous inodes (3.0%)
         # of inodes with ind/dind/tind blocks: 223/4/0
   40181 blocks used (20%)
       0 bad blocks
       0 large files

    2412 regular files
     227 directories
      32 character device files
     173 block device files
       0 fifos
       0 links
     344 symbolic links (344 fast symbolic links)
       1 socket
--------
    3189 files
/sbin/fsck.ext3 returns 0
Mounting /dev/md0 /tmpRoot
kjournald starting.  Commit interval 5 seconds

EXT3 FS on md0, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

------------upgrade
use default /dev/md2
Begin upgrade procedure
Mount data partition
/bin/mount /dev/md2 /tmpData
kjournald starting.  Commit interval 5 seconds

EXT3 FS on md2, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

No upgrade file exists
End upgrade procedure
============upgrade
/dev/md0 /tmpRoot ext3 rw,data=ordered 0 0
none /sys sysfs rw 0 0

linuxrc.syno executed successfully.
kjournald starting.  Commit interval 5 seconds

EXT3 FS on md0, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

VFS: Mounted root (ext3 filesystem).

Trying to move old root to /initrd ... okay

Freeing unused kernel memory: 124k init

Mounting proc filesystem...
Check new disk...
Not new disk. Do nothing.
Adding 393464k swap on /dev/md1.  Priority:-1 extents:1 across:393464k

/dev/md0 on / type ext3 (rw,data=ordered)
/tmp on /tmp type tmpfs (rw)
Hostname cs406
192.168.1.13	cs406.thengang		cs		cs406

Network interfaces: eth0 lo 
Load llc.ko... 
Load psnap.ko... 
Load appletalk.ko... 
NET: Registered protocol family 5

Load fat.ko... 
Load vfat.ko... 
Load sg.ko... 
sd 1:0:0:0: Attached scsi generic sg0 type 0

sd 0:0:0:0: Attached scsi generic sg1 type 0

Load usbcore.ko... 
usbcore: registered new driver usbfs

usbcore: registered new driver hub

Load quota_v2.ko... 
Mounting sysfs...
Mounting usbfs...
sk98lin: Network Device Driver v8.31.2.3

(C)Copyright 1999-2006 Marvell(R).

eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter

      PrefPort:A  RlmtMode:Check Link State

Load synobios....
drivers/synobios/ds406-synobios.c(617)target = 32

I2C read 0x55

I2C read 0x48

I2C read 0x29

I2C read 0x4

I2C read 0x28

I2C read 0x12

I2C read 0x6

synobios: load, major number 201

====== MODEL_CS406 ======

mknod: synobios: File exists
eth0: network connection up using port A

    speed:           100

    autonegotiation: yes

    duplex mode:     full

    flowctrl:        symmetric

    irq moderation:  disabled

    scatter-gather:  enabled

    tx-checksum:     enabled

    rx-checksum:     enabled

eth0      Link encap:Ethernet  HWaddr 00:11:32:01:46:DA  
          inet addr:192.168.1.13  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:516 (516.0 B)  TX bytes:452 (452.0 B)
          Interrupt:18 Memory:bfff8000-0 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Add default router 192.168.1.1
kernel.panic = 3
Starting syslogd...
Regen fstab ...
Pass CheckSynoinfo ...
Pass CheckUser
Pass CheckSmbConf ...
Pass CheckCronTab ...
Pass CheckGroup.
Pass s62_synocheckapple ...
Checking and Mounting filesystem(s) ...
/dev/md2. Clean. 
Mounting /dev/md2 on /volume1.
kjournald starting.  Commit interval 5 seconds

EXT3 FS on md2, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

Quotaon on /volume1.
synokerneltz: set kernel time zone to -60
kernel.core_pattern = /volume1/@%e.core
fs.suid_dumpable = 2
vm.min_free_kbytes = 4096
done.
Starting scemd...
Md[0].Sd  [1] [1] [0] [0]  SdCount=[2]
Md[1].Sd  [1] [1] [0] [0]  SdCount=[2]
Md[2].Sd  [1] [1] [0] [0]  SdCount=[2]
Md[3].Sd  [0] [0] [0] [0]  SdCount=[0]
Md[4].Sd  [0] [0] [0] [0]  SdCount=[0]
Md[5].Sd  [0] [0] [0] [0]  SdCount=[0]

synocheckvolume: Pass SYNOCkVolCheckSysVol()
synocheckshare: Pass SYNOICheckShare()
synocheckshare: Pass SYNOICheckShareExt()
cat: /var/run/scheduler.pid: No such file or directory
synocheckshare: Pass SYNOICheckServiceLink()
synobootup: BEGIN
synobootup: END
Starting inetd...
Starting crond...
Volume of service download is not found
volume : 0
Download hasn't set its' volume, let user to choose...
warning: cannot change to home directory
psql: could not connect to server: No such file or directory
	Is the server running locally and accepting
	connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
Update download queue table and set all pid to -1
warning: cannot change to home directory
psql: could not connect to server: No such file or directory
	Is the server running locally and accepting
	connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
warning: cannot change to home directory
createdb: could not connect to database template1: could not connect to server: No such file or directory
	Is the server running locally and accepting
	connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
Failed to create database
Starting smbd and nmbd.
Media service is disabled. Skip...
Starting sshd ...
Start System Apache Server .....-f /usr/syno/apache/conf/httpd.conf-sys
/usr/syno/etc/rc.d/S97apache-sys.sh: system httpd started
start findhostd
Load ehci-hcd.ko... 
ehci_hcd 0000:00:0e.2: EHCI Host Controller

ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1

ehci_hcd 0000:00:0e.2: irq 17, io mem 0xbfffcf00

ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 5 ports detected

Load ohci-hcd.ko... 
ohci_hcd 0000:00:0e.0: OHCI Host Controller

ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2

ohci_hcd 0000:00:0e.0: irq 17, io mem 0xbfffe000

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 3 ports detected

ohci_hcd 0000:00:0e.1: OHCI Host Controller

ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3

ohci_hcd 0000:00:0e.1: irq 17, io mem 0xbfffd000

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

Load uhci-hcd.ko... 
USB Universal Host Controller Interface driver v2.3

Load usb-storage.ko... 
Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

Load usblp.ko... 
usbcore: registered new driver usblp

drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver

Load usbhid.ko... 
usbcore: registered new driver hiddev

usbcore: registered new driver usbhid

drivers/usb/input/hid-core.c: v2.6:USB HID core driver

Starting local daemons: